-
Posts
213 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by ayen_s
-
-
Finish repaint vocoder.
Sent from my iPhone using Tapatalk
- 2
-
This how i did mine. From my discussion on Anovos FB group, this is how it shall be.
(Don't mind the vocoder. It WIP)
Sent from my iPhone using Tapatalk
-
Continue with painting the teeth.
Later will continue with vocoder.
Sent from my iPhone using Tapatalk
- 1
-
Have opportunity to darken inside helmet. I use Rust o Leum Black Latex paint. It will dry to matt black. I use cotton gauze for reinforcement.
Sent from my iPhone using Tapatalk
-
Trim eye socket. Reduce the return edge.
Before (above), After (below).
Sent from my iPhone using Tapatalk
-
Dismantle helmet:
I previously use hot glue to stick some foam. I use cold ice to freeze the hot glue residue. Wash the helmet with water and soap.
Found cracks at 2 places. These were previously hidden by S trim.
Will reinforce this area.
Sent from my iPhone using Tapatalk
-
Update:
Will continue tomorrow.
Sent from my iPhone using Tapatalk
-
Hovi Mic Accuracy update:
Obtained below parts for accuracy
1. Nail polish remover: remove existing paint.
2. Humbrol colours
A) No 14: French blue
No 48: Mediterranean blue
C) No 85: Coal black
D) No 5: Admiral grey
3. Counter sunk screw
Test the nail polish remover on the grey teeth.
Sent from my iPhone using Tapatalk
-
Part 2 unboxing:
Comparison shot: Left: Hasbro, Right: Anovos
Comparison shot: Left: Hasbro, Right: Anovos
If you want details picture of the parts, please let me know.Sent from my iPhone using Tapatalk
- 2
-
I bought one. Unboxing pictures below. Part 1 of unboxing.
Sent from my iPhone using Tapatalk- 2
-
I just remember your posting in another threads Novak Dimon and Thanks to reminding me again ayen_s.
Previous thread
Sent from my iPhone using Tapatalk
- 1
-
Install the new bigger mesh. Dap superglue sparingly to the edge.
Reinstall hovi mic to bucket.
Looks better right?
Sent from my iPhone using Tapatalk
- 1
-
Hi,
I installed prescription lenses inside my bucket because there is no room for glasses.
It's working great!
Yes, this what I mention before. BTW, the lenses from old spectacle or you order new? awkward to order new lenses from optician without frame.
-
I dont wear eye glass during troop. I can see near object fine. Far away object bit blurry though. I did saw some one attaching his spectacles lenses directly to his inside visor. Cant remember how, probably with hot glue.
-
Remove masking tape.
Apply new masking tape. This time leave some gap on the tip.
Spray some white paint on flat surface.
Dip the hovi mic tip on the wet paint. You will get the fine thin white ring on the tip.
Remove masking tape after paint dried.
Sent from my iPhone using Tapatalk
-
I remove the mesh after i am happy with the fit. Apply masking tape to outside of the hovi mic.
Spray paint the inside with gloss white paint. Wait paint to dry.
Sent from my iPhone using Tapatalk
- 1
-
Hovi Mic accuracy update:
Trial fit the new mesh.
Sent from my iPhone using Tapatalk
-
Superglue or any type of CA Glue.
that way you don't get that "gunky" mess lol
Ok, now with superglue. Now waiting it to dry.
Sent from my iPhone using Tapatalk
-
Hovi Mic Accuracy update:
From CRL pictures, the hovi mic screen each mesh size approximately 2mm.
The internal diameter of the hovi mic tip is 16mm. I found marker pen body have 15mm++ outer diameter. Will use it to shape the mesh.
Found a small sieve that have suitable mesh. Take out from the frame.
Flatten it out.
Hard to keep the molded mesh shape after trimming to size. Tried using E600 and got this big gunk at the end. Will look into other method.
Sent from my iPhone using Tapatalk
-
Hi Ahmad, this start looks very promising You made your homework.
If you decide to take a Completion Set, you can remove the following items from your list, because they are in the set already:
- D-Ring
- super glue
- putty (green stuff)
- Aluminum flat bar
- and the hex-screws for the muzzle and grip
Just send a PM if you are interested...
Checking your tools-list, I noticed you are planning to paint the grip in satin black and the gun body in gloss black. May I suggest to read chapter #28 (painting) and possibly swap this?
The T-tracks on the original guns in the movie were made of black plastic. Not sure how these will look like in gunmetal grey but that color would definitely be a good choice for the inner bolt and the ejection port area.
Please don't get me wrong, I don't want to tell you how to build your blaster. Just wanted to mention a few things.
Whatever you do, if you work at the same level as your first posting above, this will become a very good E-11
Thank you Tino for the suggestion. Your kit is one of the recommended upgrade in FISD.
Regarding the painting, appriciate the link. Will read it all up.
Sent from my iPhone using Tapatalk
-
Good clean build sir. Awesome armor.
Sent from my iPhone using Tapatalk
- 2
-
I am starting my build to have my own E-11. No stormtrooper is complete without their E-11 blaster. Due to restriction in importing weapon look alike item into my country, i went with a Doopydoos E-11 resin full kit. Less risk for it to be confiscated by customs etc. Doing a build thread so I can compile my research and findings while waiting for the kit to arrive.
Reference build thread:
2. T-Jay
3. DM101
3. Painting the Doopydoos E-11
Upgrade parts:
Below are my wish list for better looking E-11
1. T-Jay Completion Sets for E-11
2. Gazmosis Replacement Magazines
3. Suitcase Props 3D Printed E-11 parts
4. Screen-accurate E11 Power Cylinders
5. E-11 Blaster D-Ring Trooperbay
Tools:
1. Super glue
2. Tamiya putty
3. Grey Surfacer paint
4. Silver gloss paint
5. Black gloss paint (body)
6. Black satin paint (grip)
7. Brass satin paint (scope)
8. Gunmetal satin paint (t-tracks)
9. Paint brush
10. Sand paper
11. File
12. Drill
13. Drill bit (3/8",7/16")
Parts:
1. DoopyDoos Resin kit (
order 1/9/2016) (reorder and arrive on 3/8/2017) c/w1.1 Main barrel
1.2 Folding stock-rear
1.3 Hengstler counter
1.4 Scope
1.5 Grip handle
1.6 Sling swivel keeper
1.7 Front sight
1.8 Trigger
1.9 Magazine
1.10 Magazine receiver
1.11 Power cell-fuse
1.12 Rear stock catch
1.13 Bayonet lug
1.14 Muzzle flash guard
1.15 Ejector guard
1.16 Charging handle
1.17 Rear flip-up sight
1.18 Magazine release button
1.20 Selector switch
1.21 End cap
1.22 Trigger guard
2. Aluminium flat bar (purchased 7/9/2016)
3. Socket Head Cap Screw M6 (grip)
4. Socket Head Cap Screw 1/4-20 (muzzle)
Work in progress. Will continue update during my research.
- 1
-
Your tusken rider sure look menacing. Excellent job.
Sent from my iPhone using Tapatalk
-
Your tusken raider sure look menacing. Excellent job.
Sent from my iPhone using Tapatalk
ayen's ANOVOS TK ANH Stunt build
in ANH Build Threads
Posted
Reinstall helmet and ear. Paint new screw with white paint.
Sent from my iPhone using Tapatalk