Jump to content

Scimitar

501st Stormtrooper[TK]
 View Profile  See their activity

  • Posts

    410

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Posts posted by Scimitar

  2. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    21 minutes ago, wook1138 said:

    Looks great, Eric!  You might as well Velcro both boots/shins - depending on what you are doing during a troop, they can both shift around a bit.  The Velcro does a solid job of keeping them lined up nicely.

    Thanks Greg! It's exciting to finally be to this point! And that's what I'll do. :) 

    • Like 1

  3. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted · Edited by Scimitar

    And... I have submitted my pictures!! Now I anxiously await approval.

     

    44875920511_26f6b6ea36_c.jpg

     

    31003041688_74c155807c_c.jpg

     

    44875920241_ffbb91c090_c.jpg

     

    44155621574_cbfb3ecd9f_c.jpg

     

    44875919791_7ca44879db_c.jpg

     

    43064191550_9a3017c549_c.jpg

     

    44875919641_e7165ca8b8_b.jpg

     

    I still need to secure the Shoulder Bridge elastic in place (decided to do that with Velcro instead of glue) and I need to add some Velcro to the right shin and boot, it stays put until I do an action pose. It comes back into line but just not all the way. The left shin doesn't move but I'll add some Velcro to it too.

     

    Running To-Do List:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges
    4. Velcro Shoulder Bridge elastic in place
    5. Glue in snap plates for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition Bicep Hooks
    8. Reshape Shins & Back Plate at Shoulders
    9. Glue in Shin Magnets and Covers (Temp. Countermeasure for Covers in place)
    10. Final thigh test fit for upper thigh trimming
    11. Glue in snap plates for Thigh Garter System
    12. Glue on Silicone Hand Plates
    13. Install Sniper Knee Plate (:icon_beg:)
    14. Submit Application/Pictures to GML
    15. Submit Member Application
    16. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    17. Make any necessary changes & submit EIB Application
    18. Make any necessary changes & submit Centurion Application 
    19. Start next build 
    • Like 3

  4. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted · Edited by Scimitar

    So drilling the holes in the magnet covers did not work. So I will be making new covers with flatter recesses, thanks to LTM for the sacrificial magnets & jig thingy! In the meantime I took some of the magnets I had been using for clamping and re-purposed them into inner strip magnets. They work perfectly for this because they are larger than the holes in the shins and their surface would be where the original magnets would have been.

     

    44156338934_b24c8076f4_z.jpg

     

    I also decided to redo the shoulder straps, this time completely doubling over the elastic front to back for strength and reinforced them with plastic strips in between all of the snaps like before. This let me ensure that the shoulder bells were as tight to the shoulder bridge area as possible, the first straps were still allowing too much gap for my liking.

     

    31003723108_796f937bc3_z.jpg

     

    As noted previously I also lengthened the distance between the bicep and forearm, I had to use 1/2" vs the usual 1/4". Thanks long arms. I also added a bit of padding under the forearms to keep them from rotating, the left one more so than the right. I need to reglue the left strap to be further inboard. Small and easy improvement.

     

    I also glued the silicone hand guards to the gloves using the Loctite Plastics Bonding System. When the activator is used properly this stuff sets up FAST! The glue itself is also very runny, so be sure to take that into account. I did it all at once while wearing the glove and had some get out from under the hand guard. No worries though, acetone will remove it from the glove with no ill effects that I could see, other than a little fading that went mostly away after I handled the gloves for a bit. If the acetone touches the hand guard it will smear white onto the glove but that wipes away with acetone too.

     

    I'd recommend gluing them on in sections, starting in the center and working to the edges. The glue sets up so quickly you could do it easily while wearing the glove and you'll likely make less of a mess. :) And don't worry about going overboard with the activator, it doesn't leave any residue behind.

     

    43965418925_4de59f14f5_z.jpg

     

    Sniper knee plate. The one part that strikes fear into the hearts of many AP kit owners.

     

    I started by clamping it flat against the cover strip with a stronger clamp than the normal spring clamps I've been using (thus the tape on the front of the knee plate in the pictures). The left arm (facing the knee plate) naturally fell into alignment with the shin ridge when the plate was angled, the right arm of course did not. So while clamped I figured that I needed to twist the right arm to move it down into alignment with the shin ridge. I practiced the movement it took to make the arm move down and then did that with a hot bath. The result is a knee plate that is centered and resting flat against the cover strip, a bit crooked as expected with the AP plate, and is aligned with the ridges. Then I applied a healthy amount of glue on the front and waited to glue the arms as a next step.

     

    44826334232_825bc6eb9f_z.jpg

     

    31003709438_db699c3867_z.jpg

     

    44156336454_39f7ff2f29_z.jpg

     

    Here you can see the arms are mostly aligned and only need a little bit of finger pressure to close them against the shins.

     

    31003699548_6f9828af05_z.jpg

     

    44826334712_ab6daa7931_z.jpg

     

    29940068127_1ffcc3ddfe.jpg

     

    43064863720_e41745d199.jpg

     

    44156340154_154f8c513d.jpg

     

    31003718488_8b6a87ed80.jpg

     

    I don't have any pictures but I glued and clamped the arms to the shins with a little glue to account for the small contact area (don't forget to sand both surfaces to help adhesion). Then I added a little more glue in layers, separated by a few hours each time, to build up the glue support between the arms and shin. This method seems to be working well so far, the arms aren't coming off even with the repeated action of putting the shin on and taking it off.

     

    Running To-Do List:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges
    4. Velcro Shoulder Bridge elastic in place
    5. Glue in snap plates for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition Bicep Hooks
    8. Reshape Shins & Back Plate at Shoulders
    9. Glue in Shin Magnets and Covers (Temp. Countermeasure for Covers in place)
    10. Final thigh test fit for upper thigh trimming
    11. Glue in snap plates for Thigh Garter System
    12. Glue on Silicone Hand Plates
    13. Install Sniper Knee Plate (:icon_beg:)
    14. Submit Application/Pictures to GML
    15. Submit Member Application
    16. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    17. Make any necessary changes & submit EIB Application
    18. Make any necessary changes & submit Centurion Application 
    19. Start next build 

  6. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    Small pictureless update:

    - Both shoulder bridges are glued in place, the second one will reach the targeted cure time tonight.

    - All of the shin magnets are glued & cured inside the shin cover strips.

     

    Back to the magnet covers, even after three days they were still not cured under the magnet, basically they were curing at the sides and sealing the wet, excess glue inside. The recesses are slightly domed instead of flat, this may be contributing to the problem, so last night I drilled a small hole in the center of the back of the covers and reglued. I think this might take care of the issue. We'll see. I have a backup plan if not.

     

    In the meantime I started playing with the sniper knee plate and after a bit more trimming of the remaining return edge I have a plan of attack for attaching it, so I'll be taking care of that within the next day or two.

     

    Running To-Do List:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges
    4. Glue Shoulder Bridge elastic in place
    5. Glue in snap plates for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition Bicep Hooks
    8. Reshape Shins & Back Plate at Shoulders
    9. Glue in Shin Magnets and Covers
    10. Final thigh test fit for upper thigh trimming (Front done, rears to be done)
    11. Glue in snap plates for Thigh Garter System
    12. Glue on Silicone Hand Plates
    13. Install Sniper Knee Plate (:icon_beg:)
    14. Submit Application/Pictures to GML
    15. Submit Member Application
    16. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    17. Make any necessary changes & submit EIB Application
    18. Make any necessary changes & submit Centurion Application 
    19. Start next build 
    • Like 1

  9. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    Forward progress on the shins last night. I cleaned up the left shin from regluing the cover and inner strips and then I glued the magnets into the cover strip, so those are curing now.

     

    I found out that the magnets I glued into the little covers Sunday morning still weren't cured yet. The E6000 was cured at the surface but was still liquid under the magnet. Accidentally found that out when one of the covers got too close to one of my clamping magnets. Guess I'll need to give them the full 72 hours and see what happens.

     

    I put some magnets inside the right shin to test how well it will close once the magnet covers are glued in place. I'm happy with this!

     

    44752099241_455341586e_z.jpg

     

    44752099851_b911fa5fc1_z.jpg

     

    I also reglued the hooks back into the biceps, I positioned them a little higher than they were originally to accommodate the potential bicep placement. I plan on gluing the second shoulder bridge on tonight and once that cures I'll begin working on getting the arms positioned right. Going to try to get the rear of the thighs trimmed up tonight too.

     

    Running To-Do List:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges (One glued, one to go)
    4. Glue Shoulder Bridge elastic in place
    5. Glue in snap plates for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition Bicep Hooks
    8. Reshape Shins & Back Plate at Shoulders
    9. Glue in Shin Magnets and Covers (In progress)
    10. Final thigh test fit for upper thigh trimming (Front done, rears to be done)
    11. Glue in snap plates for Thigh Garter System
    12. Glue on Silicone Hand Plates
    13. Install Sniper Knee Plate (:icon_beg:)
    14. Submit Application/Pictures to GML
    15. Submit Member Application
    16. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    17. Make any necessary changes & submit EIB Application
    18. Make any necessary changes & submit Centurion Application 
    19. Start next build 
    • Like 2

  11. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted · Edited by Scimitar

    Today I gave the shins a hot bath. The left shin wasn't cooperating but I finally got it worked right, but then the rear strips came halfway unglued from all of the heat. Got those reglued and curing though. Started gluing the magnets in the right shin and into the magnet covers but I have to stop for a bit so I'll finish that later tonight.

     

    I also glued in the rest of the snap plates to get that out of the way and got one of the shoulder bridges glued in place and curing.

     

    I did a test fit with the thighs on and got the front of them trimmed down nicely. Now I just need to mark & trim the rears of the thighs and they'll be done.

     

    During the test fit I also snapped on the shoulder bells and thanks to my long arms I'm going to have to drop the biceps very low in the shoulder bells to minimize the elbow gap, so I positioned the snap plates inside the bells accordingly, with some wiggle room just in case. I'll probably need to make slightly longer bicep hooks too. And I'll have to remake new bicep-to-forearm straps with a gap wider than 1/4".

     

    I did get the belt all done though (modeled by my wife's mannequin).

     

    44724497701_25679a262a_z.jpg

     

    Running To-Do List:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges (One glued, one to go)
    4. Glue Shoulder Bridge elastic in place
    5. Glue in snap plates for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition or Remake Bicep Hooks
    8. Reshape Shins & Back Plate at Shoulders
    9. Glue in Shin Magnets and Covers (In progress)
    10. Final thigh test fit for upper thigh trimming (Front done, rears to be done)
    11. Glue in snap plates for Thigh Garter System
    12. Glue on Silicone Hand Plates
    13. Install Sniper Knee Plate (:icon_beg:)
    14. Submit Application/Pictures to GML
    15. Submit Member Application
    16. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    17. Make any necessary changes & submit EIB Application
    18. Make any necessary changes & submit Centurion Application 
    19. Start next build 
    • Like 1

  12. MandalorianHelm First TK Build (AP)

    in ANH Build Threads

    Posted

    I used 6-32 x 9/16" screws for mine, they work with the nuts supplied in the AP kit and the screw heads are about the same diameter as the AP screws. I sourced them online as I couldn't find them at the usual places locally (Home Depot, Lowes, Ace, etc.). I have a ton left over, if you don't have any luck finding them and want a set for your TD just PM me your address and I'll drop some in the mail.

  13. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    A bit of an adventure tonight with riveting the ammo belt to the canvas belt. Big thanks to Christine for catching a mistake I made but also for some helpful moral support!

     

    Somehow through all of my research I had missed the need to curve the belts together while marking the outside holes for riveting. I had only remembered folks posting it wasn't necessary to give the ammo belt a hot bath to pre-curve it and for whatever reason I didn't even think about curving them. If you don't do this step, the rivets will definitely have some hard diagonal stress when you wear the belt. I could see it as soon as she mentioned it so off came the two outside rivets.

     

    I curved the belts, slotted the existing holes in the canvas belt to match the new rivet location and reattached the ammo belt, backing the rivets with finishing washers I had. This provided some extra bite into the canvas and ABS inside the belt and will keep the rivet from sliding in the slot, it doesn't move. And they provide a nice finished look too.

     

    So if anyone asks me I would probably recommend giving the ammo belt a hot bath, just in case. lol

     

    29730436257_763f79509d_z.jpg

     

    And here's the belt snapped to the armor:

     

    44668512561_11e2518a2a_c.jpg

     

    The ammo belt doesn't sit exactly even under the large button plate (even though the canvas belt was even last night), I tried to put some good light on the picture to make that visible. Basically it touches the right corner but there's a 1.5mm gap on the left side. Does this still look ok for Centurion?

     

    I went back to Home Depot after work and got the Husky 25 gallon bin, it fits in the trunk just right. First thing I did was clean it up, very dusty. Now I need to get some stickers for it. :) 

     

    42858430110_5691ca9415_z.jpg

    • Like 2

  15. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    12 minutes ago, Cricket said:

    I use this bin for my kit.  I nest the arms and legs all together, and those fit inside the torso.  Helmet goes in a separate helmet bag.  I use old white pillowcases as padding and protection.   There's even extra space for a repair kit, boots, and my blaster. 

     

    https://www.homedepot.com/p/Husky-35-in-Mobile-Job-Tool-Box-222167/205053257

    Cool, that's the 25 gallon bin that they had next to the big 50 gallon bins, but it looks so small inside. lol I'll give that one a shot! Thanks!

  16. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted · Edited by Scimitar

    Got the belt snap bases installed in the ab. Thanks to multiple people for noting that the left side snap needs to be about 40mm from the raised edge on the AP armor vs the 59mm that the Billhag diagram calls for.

     

    43748575585_6858591762_z.jpg

     

    Then I marked the canvas belt and set the other side of the snaps. I also trimmed the 45* angles onto the ABS belt, drilled the rivet holes, and went to install it but found out that none of the rivets I have will capture the thickness of both belts. Oops! So went to Home Depot today for rivets with a longer grip.

     

    42847770840_b087509a23_z.jpg

     

    I also bought a Husky 50 gallon rolling box because I figured it was finally about time... and it doesn't fit in my car (G37 sedan). :( It could have fit in the back seat if I didn't have a car seat, but I would like to avoid having to take that out to troop, and my wife and daughter might want to tag along from time to time as well.

    So, any recommendations for a slightly smaller box? I considered the Husky 25 gallon box they had, but it seems like it wouldn't be tall enough for everything to fit after some padding was added. Seems like something in between those two boxes would be perfect.

     

     

    Running To-Do List:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges
    4. Glue Shoulder Bridge elastic in place
    5. Glue in straps for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition Bicep Hooks
    8. Reshape Shins & Back Plate at Shoulders
    9. Glue in Shin Magnets and Covers
    10. Final thigh test fit for upper thigh trimming
    11. Glue in snap plates for Thigh Garter System
    12. Install Sniper Knee Plate (:icon_beg:)
    13. Submit Application/Pictures to GML
    14. Submit Member Application
    15. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    16. Make any necessary changes & submit EIB Application
    17. Make any necessary changes & submit Centurion Application
    18. Start next build

  17. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    1 hour ago, wook1138 said:

    LOL

     

    When a trooper starts making the "to do" list, you know they are starting to see the light at the end of the tunnel.  ;)

     

    So, what's the next build? :popcorn:

    That's definitely what it is. It's a dim light but it's there. :)

     

    Well if Anovos ever gets their act together I'll be building a TFA FOTK, this build was supposed to keep me distracted from the delays on that kit. Now that it looks like I'll probably be done before they ship I might begin working on the Phase II Clone Trooper that I've started hoarding parts for. Trying to decide between a Shock Trooper or a 501st Battalion Clone. Meanwhile my wife decided she wants in on this fun (but without armor) and wants to do an Amidala Pastel Lake Gown, so I may need to help her start working on that too.

    • Like 2

  18. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    Carrying on with the shins, I made all of the magnet covers I needed using my Super Advanced Magnet Cover Jig Thingy.

     

    Freshly pressed:

     

    44587638942_7f01dea074_z.jpg

     

    Magnet test fit:

     

    43918969774_756de1ef3b_z.jpg

     

    43918972194_5505e45db4_z.jpg

     

    And after a nice round of surface sanding here's the group. I need to re-sand inside the recesses to prepare them for gluing (the surfaces were sanded before pressing).

     

    44637745701_19b1f80169_z.jpg

     

    42827694810_b064f5aee3_z.jpg

     

    The shins definitely need a little reshaping via a hot bath, but I'm going to give them both the full 72 hour cure time before I subject them to that heat.

     

    Remaining to-do list:

    1. Drill/install snaps in ab for belt
    2. Build Belt
    3. Glue on Shoulder Bridges
    4. Glue Shoulder Bridge elastic in place
    5. Glue in straps for Shoulder Bell to Shoulder Strap connection
    6. Glue in snap plates for Shoulder Bell to Bicep connection
    7. Reposition Bicep Hooks
    8. Reshape Shins
    9. Glue in Shin Magnets and Covers
    10. Final thigh test fit for upper thigh trimming
    11. Glue in snap plates for Thigh Garter System
    12. Install Sniper Knee Plate (:icon_beg:)
    13. Submit Application/Pictures to GML
    14. Submit Member Application
    15. Hopefully be able to sign up for 9/28 troop (:icon_eek:)
    16. Make any necessary changes & submit EIB Application
    17. Make any necessary changes & submit Centurion Application
    18. Start next build
    • Like 2

  19. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    1 hour ago, Cricket said:

    Magnets FTW!!!!  Great idea for those closures!

    And super cool magnet-jig thingy you created, too.  Ingenious!

    Thanks!! If I had a router I'd have improved that jig thingy, but this will get the job done for 10 covers.

    1 hour ago, wook1138 said:

    This build just gets more and more interesting.  Nicely done!

    Thank you sir!

    36 minutes ago, 68Brick said:

    Eric, Nice job on your build.

     

    While trooping, you'll have to be cognisant of how people are interacting with you. Those magnets around your midsection are right in the "hug-zone". Any electronic devices brought near those magnets might see some damage. "Zap! what happened to my phone!?"

    Thanks Brad!

     

    It's a good point! Cell phones use flash memory, which is not affected by magnets as there are no moving parts. This is why many phone cases & mounts these days use neodymium magnets to connect. But pacemakers and implanted defibrillators can be affected by those magnets, a study found that a distance of 3cm or less could cause interfere with the magnetic switch in those devices, but typically observed after long contact (magnetic jewelry, name tags, etc.). Either way, like you said, always something to try to be aware of regardless.

  20. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    The left shin's rear cover strip is glued on and drying. Next will be giving the shins a hot bath if needed and scuffing up the magnet surfaces and gluing them on under the cover strips.

     

    I need to reposition my bicep hooks, they aren't quite right and pull my biceps/forearms up too high on my arms. Easy enough to fix after another test fit. That will help me measure for the snaps/straps that I'll be using to connect the shoulder bells to biceps too.

     

    I did a test run for making the shin magnet covers since I don't have a spare magnet to sacrifice to the heat gun. Let me see if I can lay this out so it makes sense:

    - One of my 9mm sockets is just a bit larger in diameter than the 12mm magnet, which is perfect to let the magnet just drop in place in the ABS.

    - I drilled a 1/2" hole through one piece of wood, this piece serves as a guide for pushing the socket straight down and also helps press the ABS corners back flat after being warped by the heat gun. The thickness of this piece is less than the length of the socket. I was prepared to countersink the hole so that I could push far enough into the ABS for the magnet to sit flush, but the thickness is just right. The socket adapter bottoms out on the wood and the recess in the ABS is just right. 

    - The second piece of wood is the base and I simply drilled a 1/2" diameter recess into it to push down into.

     

    30745730588_7d5209749b_z.jpg

     

    And here's the first test piece that came from this crude setup. Perfect fit. I've since marked the wood base with alignment lines and each piece of ABS will get marked as well so that the magnets are as centered as possible when I press them.

     

    30745731968_15f5d4a0cb_z.jpg

     

    43707036115_612f8ca0db_z.jpg

     

    So I had planned to make a tab/slot connection for the right side kidney/ab connection, but playing with magnets sparked a crazy idea. With a buddy's help, we 3D printed some ABS bases, seen here with the N52 magnets already installed:

     

    29678291807_2102c52875_z.jpg

     

    The alignment when connected is perfect:

     

    29678292097_c2dfe706e1_z.jpg

     

    The N52s have a crazy strong pull and I had to twist the bases to pull them apart, something that wouldn't be possible when they were glued to the armor, so I added thin ABS covers to them and that did the trick. They still have the super strong pull but they don't have to be twisted to pull apart.

     

    44566351832_f12e43039d_z.jpg

     

    And installed:

     

    30745725318_969ec66bf7_z.jpg

     

    I intentionally left a 1mm gap between the ab and kidney just in case adding the belt causes some weird closure problems (didn't want to run into any weird issues I didn't account for), if everything is ok I'll just reposition two of the magnet bases on one side to close that gap. But these work exceptionally well with the existing straps and should those ever fail these will hold that connection closed very well.

     

    44566353762_b03fea5d1a_z.jpg

     

    • Like 4

  22. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    4 minutes ago, Cricket said:

    Those shins look great!  See, it's not so scary to make holes in them, right?  ;)   Keep up the good work!

    Thanks! Nope, not even in the slightest. :) I did forget to order a heat donor magnet when I ordered the magnets for this particular project, but I have an idea on how to make the little covers without sacrificing a magnet, going to mess with that tonight too hopefully.

    • Like 1

  23. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    Got to work on the shins over the weekend. Using the magnets for this project, I made outlines on the top side of the shins for cutting guidance:

     

    44545691342_8ee57c5bc3_z.jpg

     

    Cut those out with a small sanding drum on the Dremel and taped the two halves together in preparation for the next step:

     

    44545697252_713d32fd4b_z.jpg

     

    More cutting outlines:

     

    44595719691_8bbf2b0dc5_z.jpg

     

    All cut and ready for the cover strip:

     

    43876932184_d9e1f252ac_z.jpg

     

    Cover strip installed on the right shin only at this point, will install the left shin cover strip tonight:

     

    43686078045_c181b6cbc7_z.jpg

     

    Also glued in the strap for my shoulder bells:

     

    43686078665_e597cdca89_z.jpg

     

    On 9/1/2018 at 10:02 AM, Daetrin said:

    Wow, that's pretty nifty.  Do you have a pix of this on your kit?  Maybe I'm on the skinny side, but I've also used strategically placed foam to get the look right.  With the tab does it still give you flex when you bend/turn?

    Here you go, using @gmrhodes13 idea, I made one to keep the right side of my posterior from sinking under the kidney:

     

    43686079705_63ac540cdd_z.jpg

    • Like 3

  24. Scimitar's ANH Stunt Build - AP

    in ANH Build Threads

    Posted

    I had to remake one of the inner shin strips, I accidentally tore one of them up drilling one of the 1/2" holes. No worries though, made the replacement today and got them installed. Used some rolled up packing paper to separate the two sides as the opposing side wanted to push the strip in.

     

    44558482071_3865f15d85_z.jpg

     

    Got the thigh ammo pack installed:

     

    44508886102_d6a8e49156_z.jpg

     

    Painted the rivet heads white and added some glue to keep the pack in place. When I was shooting pictures in May, one thing I noticed (and helped fix when I could) was that the ammo pack had a tendency to fall down if not secured somehow.

     

    42749598640_7d775c549b_z.jpg

     

    And got my bicep strap hooks made (and installed, not pictured):

     

    42749598720_4871ea7c6c_z.jpg

     

    The torso is also completely strapped together and I tried it on, the fit is good! I need to take some good pictures of that at some point. The only thing that I noticed was that I need to give the upper shoulder tabs of the back plate a hot bath to make them curve down towards my shoulders. I also need to add some sort of padding to the snap heads up front, they push into my collar bones a bit.

    • Like 2

  25. Xan's ANH Stunt Build [ATA]

    in Build Threads Requireing Maintenance

    Posted

    4 minutes ago, ukswrath said:

    Hence the reason I recommend DOT or Fasnap. Roghly the same cost as Tandy yet much higher quality.  

    I've had no issues with the actual Tandy snaps, if I had received them the first time around everything would have been fine. lol I've since seen a few recommendations for Fasnap, I'd not mind trying them out to see how they compare.

×
×
  • Create New...