-
Posts
486 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Starfox2010
-
-
Got to work this weekend, the family finally let me.
Connected the shoulders and biceps.
Finally connected the backplate. I missed some spots on the sides, I have to go back and glue them. Pretty good join though.
Also filled the return edges. not sure when I decide to be brave enough and fill in the wing gaps a bit but still planning on it.
and also did the shin thingies (I believe that's the proper name for them). I cleaned them up after I took this pic, and doing the puty thing
when I finallize all the pieces.
Off to the Grebleis, then the belt boxes. Can't do the TD until they send me the messed up piece. still waiting....
- 1
-
I'm interested depending on price
-
This had to be one of the most time consuming sections of my build. Between shaping them to the ab and squaring up the corners for accuracy, what a pain in the posterior lol
and to this day, the edges are not sharp enough and the gap isnt close enogh (which is why I messed up). I'm just glad I'ts not set in stone so I can re-evaluate once I feel my armor is finished, before painting.
- 1
-
Little by little im getting it going.
Here's the ab boxes. I kind of messed up, I should have just shaved and evened out the little return edges on them, they were a great fit, however after thinking about it 100x I cut and shaved them off and needed to re form them
and wasnt a great fit afterwards, especially the end boxes. The great part is that I don't have to glue them so I can go pack if needed.
Holes and screws
Ab boxes and fitting.
- 1
-
Im working on this piece but with the Anovos Armor, doesn't look much different.
http://www.whitearmor.net/forum/topic/36894-starfox2010s-tfa-stormtrooper-build/page-3#entry512910
You can also take a look at UKSWRATH's build (has links to each piece on first page). It's what i'm going off of.
http://www.whitearmor.net/forum/topic/31877-ukswraths-fotk-build-thread-tk-10116/
Gona have to split the bicep and cut out the trapezoid and ad a cover strip.
-
Which TD part was missing?
Not missing, just being replaced. it was a bad pull
-
Will do Tony, just going to sand down the top rib a bit to lay half way instead of 2/3 of the way. Think I seen what you mean on the Anovos display
Sorry for Potato quality.
I also finally received my soft parts from Anovos, and the TD replacement piece is on the way. However, not a big deal but the gloves I ordered were Large, and I received Medium.
I already got accurate ones that I bought with my boots so I might just sell these if I cant get them replaced.
- 1
-
Been waiting for your return
I am not a tech guy but I think maybe using the top of the handle as a push pen to stop and release a rotating gear gear at the bottom?
-
How does this look? Tried to do it like Tony's (not glued yet). Any opinions?
- 1
-
I'm so emerged in family projects, events, and vacations. I need to catch up. Great job so far bro!
Tell me about it, ive been wanting to go on a troop but summer is always the busiest with family.
- 1
-
So.....I just did it. The forearms got the top put on and glued up to 2/3 of the way, one side of each bicep got the cover strip
glued and the yoke got glued.
The next session should be the back piece along with the closing of the biceps and adding the ribbed pieces to the v notch. I'm going to also get started on the ab boxes.
- 1
-
Summer's been crazy and we just got a new puppy so i've been a little tied up. So i've been hiding in the bathroom working on my armor (Walter)
Sorry for large images, Photobucket's not working with me right now.
Finished the boxes but waiting on gluing then and the top of the forearms untill I get a few pieces to glue all together.
Here you can see my cover strip alont with the top measurement
Also not quite content with the yoke attachment
Right side looks good (of back)
Left side not so good (of back) trying to heat bend it little by little.
Top view looks good, however you can see how it pops out on the right side of the pic (back left)
- 1
-
Looking great. Sorry about above I was following Walters also lol
No worries, I'm back and fourth between his and my thread as well, lol.
A little input on the chest mod defining those side lines: They are nowhere near as deep on the original chests, nor does the line continue on the return edge. Just thought I'd point it out
Thanks, I'll do more research on it, I'll figure out if I should use Devcom and level the lines to avoid cracking later.
- 1
-
Was able to use the belt sander last weekend to level out some pieces to the forearms.
Worked on that today. the top lid isn't glued on yet, just getting a feel for it, need to clean it up a bit more.
The tape at the wrist side is where i'm planning to stop when gluing.
- 1
-
You should see Rick's
- 1
-
Been a while, summer time is no joke, can't get much done with family things going on.
Here is what I had so far.
installed the chest piece
backside. still have to sand down a bit.
AB piece.
Left Side
Right
Back
Ok heres where im at at the moment. Should I keep trimming some more? Im planning to do 1 piece at a time.
the pics show all 3 pieces connected by magnets and clamps.
Also, should I remove the extra trim from the center piece to match the front and back piece?
Thanks for looking
- 2
-
We don't do that in our garrison, however you need to ask your garrisons CO
- 1
-
Looks great!
-
Dude, those boxes look on point. All that from the comfort of your bathroom lol. I was thinking of using plastic welder on the edges and then sanding them down but don't want to make a mess. Might just add some underneath to reinforce it.
Looks awesome, Walt.
- 1
-
dude... did you finish the abs boxes yet?
waiting for you to do it first lol. Working on them, I have 2 more. I wanted to make sure they were perfect with no gaps, but after seeing the anovos display one, I think i'm ok.
- 1
-
Long weekend but was able to get some gluing done.
Thighs
Ankles and Biceps
I have to heat bend the bottom of the ankles a bit, they don't aling right, however I'm going to wait since you're not really going to see them
with the ankle covers.
Biceps
I'm also going to try and make the biceps accurate by redoing the triangles on the front sides of the biceps
- 1
-
What do you guys think? did some adjustments by trimming and heat bending a little. also sanded to even out the seams a bit.
Before and after
- 1
-
Followed through with the thighs. I'm not going to show the inside. I made some decisions I regret but think
I should be fine lol. I still need to smooth the edges out, before I glue.
Right Side (out)
Is it normal to have one side a little longer? I hope so...
Inside (Will be left unglued and to be velcro'd).
Outer Left
Inner Left (i'm not liking the trim but the way some of the pieces were pulled I couldnt really see the markings to cut. thats my excuse and
im sticking to it lol).
Suggestions, go for it's?
- 1
-
I can picture you saying you have to go to the bathroom and secretly working on your build in there until your wife tells you everyone is starting to worry. lol
- 3
KCP First Order F-11D Studio Replica Blaster
in Weapons of the First Order
Posted · Edited by gmrhodes13
link not working, removed gmrhodes13 2021
--------------