Jump to content

Boba_Skywalker3

Member
  • Posts

    144
  • Joined

  • Last visited

Everything posted by Boba_Skywalker3

  1. Sorry I haven't gotten back to this in a while! I have been finishing up with school. Anyway, I am going to start getting to work on the suggestions. Also here is a link to the side rivets I bought for my armor: http://trooperbay.com/2-inch-fasteners-and-washers/ The description says "These split rivet type fasteners are very close in accuracy to the originals used to fasten the ab plate to the kidney plate of the original TK armors used in SW." I measured them and they are 10 mm in diameter. Also, not trying to be difficult but is the elastic and single rivet on the drop boxes required for centurion because it is not specified in the CRL. Thanks! -Dom
  2. Hahaha not a problem! I can paint over those! I am currently out of town right now and I couldn't wait to put the pictures and I already had those side pictures and at the time I had my thighs pulled up too much but corrected it after I was told of how high they were, so th front and back pictures were take after the spacing issue was resolved and the side pictures were before. As soon as I get home I will take some new side pictures with the spacing corrected!
  3. Thank you! I could only get the best holster and blaster! Hahaha
  4. TK-14285 Requesting ANH Stunt Centurion Status Armor = ATA Helmet = ATA Blaster = DoopyDoo's Pipe Build Height = 6'0" Weight = 145 lbs. Belt Maker = TrooperBay Full Body Front - arms at side Back - arms at side Left - arm raised Right - arm raised Armor Details Ab/Kidney Attachment - Button Orientation Butt/Kidney - Not Fixed Hand Plates Shoulder Bridge and Chest/Back Connection Thigh Pack Attachment Knee Plate Drop Box Back Cod and Butt Plate Attachment Helmet Details Front Sides Back Hovi Tip Detail Lens Color S-Trim Blaster Details Left Right Accessories Details Neck Seal Thermal Detenator Back Holster Attachment Other Forearms - No Return Edges Thank you in advance for your time and let me know if you require further images! TK-14285
  5. I will tighten my belt when I put it on. I don't know why I keep leaving it loose! Thank you do much!
  6. I can definitely see it! Is there anything else I need to improve on to get EIB status?
  7. Alright, I lowered the biceps and brought up the gauntlets. I also lowered the thighs. What do you think? Thanks!
  8. Thank you for the suggestions! I thought the spacing did look a little funny! And that's awesome that you are going to the Autsim Walk!!! I can't wait!!!
  9. Thank you guys! I am actually 6'0" and 145 lbs. I purchased the belt from TrooperBay. Would you like me to adjust how I put everything on and take a few new pictures? Thanks!
  10. TK-14285 Requesting ANH Stunt EIB Status Armor = ATA Helmet = ATA Blaster = DoopyDoo's Pipe Build Height = 6'0" Weight = 145 lbs. Belt Maker = TrooperBay Full Body Front - arms at side Back - arms at side Left - arm raised Right - arm raised Right Side Detail - arm raised Left Side Detail - arm raised (NOTE: I will need to tighten the belt to prevent the thermal detenator from sagging) Armor Details Abdomen Details Action Shot Cod and Butt Plate Attachment Interior Strapping Helmet Details Front Side Side Back Hovi Tip Detail Lens Color Blaster Details Blaster - Left Blaster - Right Accessory Details Neck Seal Thermal Detenator - Back Holster Attachment Please let me know if you require other pictures! Thank you! -TK-14285
  11. I am 99.99% done! The last thing I have to do is attatch a holster I'm waiting on to the belt and then I am 100% completed!!! As soon as I attatch the holster, I am going to take all of my submission pictures and send them in 2 weeks before I turn 18!! I'm so pumped!! I would love to come and troop with you guys at C2E2!!
  12. VERY NICE!!! Where did you get the name plate? Did you make it or order it?
  13. What do you guys use to transport and store your armor? Pictures would be very helpful! Thanks! -Dom
  14. Thank you guys for all of the help! I finally attatched it to the thigh!!! What do you guys think? Thanks again! ----------
  15. I just wanted to get rid of the gap. So it looks like I will have to make up another batch of the paste and sand the refill?
  16. Ok, so I cut it and placed it aganist my right thigh to see how it looks before I use the cap rivets. The only problem I seem to be having is when I match up the corners, there is a space on both sides between the ammo pack and the thigh. Do I need to change something? Thanks! ------------------
  17. Alright, I installed the ABS paste (handmade) into the gap and here is how it turned out. I feel I will need to sand it down a bit. What do you think? Thanks! -----------
  18. Alright, I have it traced out where I am going to cut! What do you guys think? What is the best tool to cut this with (Dremel, Knife, Scissors)? Thanks! ------------
×
×
  • Create New...