Oga's Cantina - 6 Star Wars Galaxy's Edge Coasters

[gmrhodes13[Staff]]

File-Name: Oga's Cantina - 6 Star Wars Galaxy's Edge Coasters

Designer: Kwarrell72awa

Last Update: 29/01/2024

File-URL: https://makerworld.com/en/models/160918-oga-s-cantina-6-star-wars-galaxy-s-edge-coasters#profileId-176593
Description:

This set of six coasters is inspired by those available at Oga's Cantina on Batuu in Star Wars: Galaxy's Edge at both Disney World and Disneyland California. This core set of six can be printed alongside a limited edition set of four designs, which are no longer available in the parks, and complemented by the coaster display stand. Both other models are available in my profile.

 

As a Star Wars fan and a fan of these guys, this is my little tribute!

Terms of Use: https://makerworld.com/en/user-agreement

 

Images:

[JBar[TK]]

I'd love to order a set of these. I don't see physical options for sale and I don't have a printer for them

[gmrhodes13[Staff]]

You could reach out to troopers in your garrison, no doubt some may have printers

[Tzag[TK]]

Those are Great. Does anyone know if i could print them in one colour? I dont have a multi spool setup. Thank you!

[gmrhodes13[Staff]]

59 minutes ago, Tzag said:

Those are Great. Does anyone know if i could print them in one colour? I dont have a multi spool setup. Thank you!

Looks like it needs to be a multispool

 

Printing Tips:

• Most coasters share the same four colors: White, Black, Dark Red/Maroon, and Tan.
• The Cantina Code coaster uses Light and Dark Purple, as well as Tan.
• The Star Liner coaster uses Grey and White.
• Printing with an AMS is necessary for optimal results. (Automatic Material System)
• The print profiles automatically assign colors to the coasters. Before printing, ensure that you've placed your filament in the corresponding slots of the AMS according to the 3MF file.
• Ensure your print surface is impeccably clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.
• Due to the intricate details in the Bloody Rancor design, the colors and design elements do not load properly on the prepare screen when viewed from underneath. However, once the design is sliced, the colors become visible in the preview and will print without any issues. Please refer to the screenshots below for clarification.

[gmrhodes13[Staff]]

 

 

1 hour ago, Tzag said:

Those are Great. Does anyone know if i could print them in one colour? I dont have a multi spool setup. Thank you!

These don't

https://www.thingiverse.com/thing:4793097

[Tzag[TK]]

On 5/4/2025 at 9:49 AM, gmrhodes13 said:

Looks like it needs to be a multispool

 

Printing Tips:

• Most coasters share the same four colors: White, Black, Dark Red/Maroon, and Tan.
• The Cantina Code coaster uses Light and Dark Purple, as well as Tan.
• The Star Liner coaster uses Grey and White.
• Printing with an AMS is necessary for optimal results. (Automatic Material System)
• The print profiles automatically assign colors to the coasters. Before printing, ensure that you've placed your filament in the corresponding slots of the AMS according to the 3MF file.
• Ensure your print surface is impeccably clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.
• Due to the intricate details in the Bloody Rancor design, the colors and design elements do not load properly on the prepare screen when viewed from underneath. However, once the design is sliced, the colors become visible in the preview and will print without any issues. Please refer to the screenshots below for clarification.

Thanks!!

[Tzag[TK]]

On 5/4/2025 at 9:52 AM, gmrhodes13 said:

 

 

These don't

https://www.thingiverse.com/thing:4793097

Thank you so much!! Looking forward to try and print them!