Jump to content

Recommended Posts

Posted

Break out a drill and abs paste.

 

Drill a small hole at the closed end of the crack. This will slow or stop the progression of the crack.

 

Mask off the area around the crack with the trusty painter's tape

 

Then fill in the crack and hole with the abs paste.

 

Remove the painter's tape and let it dry over night.

 

Wet sand the repair and touch it up.

 

This is a pretty basic run down. There are more detailed instructions available in the 501st forums.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

  • Like 1
Posted

I have a small crack on the right side of the upper part of my chest pice what can I do to fix that?83373fe590d0d46f5ff106369f5e6971.jpg

 

Sent from my SAMSUNG-SM-G530AZ using Tapatalk

You have to patch it from inside with similar plastic or melt plastic with acetone, make a paste and fill it, either way, do it from inside to repair it

 

 

Sent from my iPhone using Tapatalk

Posted

Some great advice there,gentlemen!  I would add a small scrap of ABS on the inside.

Posted

Ben, Paul, and Joseph have got it right. Good Luck with your repair. It'll turn out fine! :duim:

Posted

Plain acetone from your local hardware store or body shop. Chop up some spare ABS into a container (stainless steel or glass container), add in some acetone, let sit then mix to a toothpaste consistency and you're on your way.

  • Like 2
Posted

You can also check for Acetone at a local beauty supply like Sally Beauty Supply.  They have small, cheap bottles of pure acetone as well.  Maybe $5 will get you plenty for TK purposes.

  • Like 2
Posted

Plain acetone from your local hardware store or body shop. Chop up some spare ABS into a container (stainless steel or glass container), add in some acetone, let sit then mix to a toothpaste consistency and you're on your way.

Toothpaste? Like what we brush our teeth with or am I thinking of ot all worng

 

Sent from my SAMSUNG-SM-G530AZ using Tapatalk

Posted

Toothpaste? Like what we brush our teeth with or am I thinking of ot all worng

 

Sent from my SAMSUNG-SM-G530AZ using Tapatalk

Think of a chocolate bar melted by the sun.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

  • Like 1
Posted

easiest method would be using CA glue with some scrap abs behind, what i did for the couple of cracks ive had

Posted

Be sure to buy pure acetone and not fingernail polish remover, which contains acetone, but it is highly diluted and doesn't work

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...