stukatrooper Posted June 15, 2008 Report Share Posted June 15, 2008 Wonder if one of you troopers can help out.I have two battery boxes holding 4AA they both have a 9V conector on the boxes.I want to run both to my rom-fx. So i would need to make a three way connector,i need to know what wires go were.I have the three 9V ends with wire on them so its a diagram i need? Hope you can help? Quote Link to comment Share on other sites More sharing options...
SuperTrooper Posted June 16, 2008 Report Share Posted June 16, 2008 Well the biggest problem I see is power. 4AAs have 6 volts and depending how you connect the two packs you can get 12v out of them. Can the Rom-FX run on 6 or 12 volts? Quote Link to comment Share on other sites More sharing options...
DesTROYer[501st] Posted June 16, 2008 Report Share Posted June 16, 2008 Yes a Rom FX runs on both 9 and 12volts Ok take two of the battery clips and join the red from one to the black from the next. That daisy chains that set in series. Take the third battery clip and solder the red from it on to the red from the joined two and the black end to the black of that set too. The first two that you soldered together red to black, go on the batter packs, the third onto your RomFX. DO NOT clip in two 9volt batteries onto this set up, that will give you 18volts and blow up your voice amp. Cheers. DesTROYer Quote Link to comment Share on other sites More sharing options...
stukatrooper Posted June 16, 2008 Author Report Share Posted June 16, 2008 thanks DesTROYer Yes the rom-fx can run on 9v or 12v. I only have the single 9v and now with the extra 2 packs of 4xAA batterys i can get the max 12v power out of it. This will give me higher volume and a longer life on the batterys. I thought it wasnt as simple as all reds together ,so thanks for sorting this one out for me Quote Link to comment Share on other sites More sharing options...
TKDUEUNO Posted June 16, 2008 Report Share Posted June 16, 2008 (edited) stukatrooper said: thanks DesTROYer Yes the rom-fx can run on 9v or 12v. I only have the single 9v and now with the extra 2 packs of 4xAA batterys i can get the max 12v power out of it. This will give me higher volume and a longer life on the batterys. I thought it wasnt as simple as all reds together ,so thanks for sorting this one out for me Hi Stuka! Since I have the ROM/FX too, here's my suggestion: Buy a three batteries battery holder and these batteries: ----- You'll have almost 12 V and very long battery life, plus they're rechargeable and only three instead of eight! Edited December 6, 2020 by gmrhodes13 link not working, removed gmrhodes13 2020 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.