TKNic Posted November 25, 2014 Report Share Posted November 25, 2014 Hello everyone, This is probably the first of many questions so lets get going. I'd like to know how much adjustment there would be in an already built suit (if any)? If I was to buy a suit already built from someone the same height as me but different wieght is it possible to adjust the suit for a slimmer build or will I be rattling around in there like a pea in a matchbox? I'm not talking huge differences but I am slim, some would say wiry and I wouldn't want arms and legs to be slipping around. All info is welcome :-) Cheers, Nic Quote Link to comment Share on other sites More sharing options...
Polar Posted November 25, 2014 Report Share Posted November 25, 2014 it all depends on the manufacturer. They are all built differently. . Im sure it could be done though. Quote Link to comment Share on other sites More sharing options...
DroidHunter Posted November 25, 2014 Report Share Posted November 25, 2014 It is hard to say exactly, to be honest. Some of the fitting certainly comes from the internal strapping system that you use to hold everything together. But the fit depends in large part on how the armor pieces fit together. For example, the shins, thighs, forearms and biceps are all rigid pieces after construction that you slide your arms/legs into. No amount of strapping adjustment will prevent a large arm or leg piece from being to large. You can pad them out with foam to a certain extent, but if you need too much padding, it may not look right. Now, depending on how the armor was constructed, you may be able to un-glue the pieces, cut them down to your size, and then re-glue them. So it all boils down to how big the size difference is, what kit was used, and how the armor was assembled. 1 Quote Link to comment Share on other sites More sharing options...
Necronaut[501st] Posted November 25, 2014 Report Share Posted November 25, 2014 In addition, you should ask if they used E600 as their glue. From what I understand, you can peel apart the pieces with no damage to the plastic if E6000 was used. If so, then you can trim down some parts so they fit better. 1 Quote Link to comment Share on other sites More sharing options...
TKNic Posted November 26, 2014 Author Report Share Posted November 26, 2014 Thanks for the info guys, exactly what I needed to know. It is the rigid arms and legs that I need to get dimensions of for a better idea. Cheers Quote Link to comment Share on other sites More sharing options...
Dday[501st] Posted November 26, 2014 Report Share Posted November 26, 2014 Thanks for the info guys, exactly what I needed to know. It is the rigid arms and legs that I need to get dimensions of for a better idea. Cheers Going smaller is always possible. Especially if they used a glue that is removable. Going bigger is harder generally speaking since you will need to add shims in most cases. Smaller is easy. You remove the coverstrips, slice the material smaller on each side (careful not too much) and put it back together. Quote Link to comment Share on other sites More sharing options...
TKNic Posted November 26, 2014 Author Report Share Posted November 26, 2014 That sounds reasonably straight forward. If any adjustment is needed it's definitely going smaller. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.