What is the preferred CA glue?

[DroidHunter]

If there is such a thing.

 

I am closing in on the end of my build, which I have done entirely with E6000. I preferred the slower cure time and inherent flexibility. However, I am going to an armor party this weekend and I need to mount my snap plates so that the vets can help me strap up. I'll never get that done with E6000. So, I am considering using CA glue to mount the snap plates (that still need to be put together...) so that I can potentially mount the plates, and then start strapping all on Saturday. So my questions are (1) does anybody else use CA glue for mounting snap plates or is there a concern about heat generation as was once suggested would happen with E6000 and metal?; (2) Are there any recommended CA glues to use for this? I saw this posted elsewhere:

---------

 

I am open to any suggestions. If CA glue is not recommended for this, I'll just finish up at another time.

Edited December 27, 2021 by gmrhodes13
link not working removed

[Locitus[Admin]]

It will work just fine. Maybe they risk popping off at a later date if the bond isn't good enough. But by then you know where to put it back and can use another glue.

 

Sent from my Nexus 5 using Tapatalk

[DroidHunter]

Thanks Mathias. If a snap does pop off I can always reset it with E6000 in the future. 

[TK bondservnt[501st]]

I liike locktite pro

[DroidHunter]

I've had good luck with Loctite brand in the past, so I'll keep that in mind. Thanks Vern.