dtrippler[TK] Posted February 2, 2014 Report Share Posted February 2, 2014 So currently my sniper plate is attached with a rivet on each side. Upgrading to level two and see that rivets shouldn't be there (not sure why didn't originally glue). So anyways, I want to glue it on instead but now I'll have a hole on each side. Will it not look right/good if I put like some caulk or something to fill the holes? Is that the only real option? Or another idea? Quote Link to comment Share on other sites More sharing options...
The5thHorseman[TK] Posted February 2, 2014 Report Share Posted February 2, 2014 (edited) ABS paste is your friend in those cases: ---------- Or you could of course buy a new sniper knee plate from the vendor you bought your armor from. Edited December 26, 2021 by gmrhodes13 link not working removed Quote Link to comment Share on other sites More sharing options...
captsafe66[Admin] Posted February 2, 2014 Report Share Posted February 2, 2014 I used the method Germain mentioned for the holes and attached the plate with velcro to enable future modifications or repairs. Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted February 2, 2014 Report Share Posted February 2, 2014 E-6000 leaves you plenty of time to adjust final position while it cures, it will also never come off unless you want it to. Just put a dab in the middle and a little on each side where it touches the shins. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.