dtrippler[TK] Posted February 2, 2014 Report Posted February 2, 2014 So currently my sniper plate is attached with a rivet on each side. Upgrading to level two and see that rivets shouldn't be there (not sure why didn't originally glue). So anyways, I want to glue it on instead but now I'll have a hole on each side. Will it not look right/good if I put like some caulk or something to fill the holes? Is that the only real option? Or another idea? Quote
The5thHorseman[501st] Posted February 2, 2014 Report Posted February 2, 2014 (edited) ABS paste is your friend in those cases: ---------- Or you could of course buy a new sniper knee plate from the vendor you bought your armor from. Edited December 26, 2021 by gmrhodes13 link not working removed Quote
captsafe66[Admin] Posted February 2, 2014 Report Posted February 2, 2014 I used the method Germain mentioned for the holes and attached the plate with velcro to enable future modifications or repairs. Quote
Locitus[Admin] Posted February 2, 2014 Report Posted February 2, 2014 E-6000 leaves you plenty of time to adjust final position while it cures, it will also never come off unless you want it to. Just put a dab in the middle and a little on each side where it touches the shins. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.