mr_speed[TK] Posted January 27, 2013 Report Share Posted January 27, 2013 Has anyone ever used any caulk or other product to fill in gaps by the ear pieces on their helmet? I don't understand why I still have gaps even though I purposefully left excess when I trimmed out my ear pieces. Quote Link to comment Share on other sites More sharing options...
mr_speed[TK] Posted January 27, 2013 Author Report Share Posted January 27, 2013 Here's a pic... Quote Link to comment Share on other sites More sharing options...
coffintanker Posted January 27, 2013 Report Share Posted January 27, 2013 Have you drilled the 2 ear mounting holes in the helmet already? if you have you'll probably have to re-drill the holes a bit lower. The ear piece in the pic can still be made to fit but it will have to sit a bit lower to be flush. Don't worry though as the ear piece will cover any extra holes. What armor make is it? worse case you could probably get an extra set of ears...the movie helmets had plenty of gaps so either way it'll be fine. Good luck... Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted January 27, 2013 Report Share Posted January 27, 2013 No you just have to trim to fit. On screen versions they had gaps but most try for s nice tight finish. Ears take a lot of sanding and trimming to get right. Have a look at some of the helmet building threads to compare. Quote Link to comment Share on other sites More sharing options...
coffintanker Posted January 27, 2013 Report Share Posted January 27, 2013 If you haven't seen it already, check out Pandatrooper's helmet build...It helped me a lot when I built mine. http://www.whitearmor.net/forum/topic/14806-how-to-assembling-ata-abs-helmet-1/ Quote Link to comment Share on other sites More sharing options...
mr_speed[TK] Posted January 27, 2013 Author Report Share Posted January 27, 2013 Have you drilled the 2 ear mounting holes in the helmet already? if you have you'll probably have to re-drill the holes a bit lower. The ear piece in the pic can still be made to fit but it will have to sit a bit lower to be flush. Don't worry though as the ear piece will cover any extra holes. What armor make is it? worse case you could probably get an extra set of ears...the movie helmets had plenty of gaps so either way it'll be fine. Good luck... It's ATA Quote Link to comment Share on other sites More sharing options...
coffintanker Posted January 28, 2013 Report Share Posted January 28, 2013 Alright, so you got an extra set of ears with your helmet...no sweat. You just gotta go a little at a time. My helmet is ATA as well... Here's my build http://www.whitearmor.net/forum/topic/22534-ata-anh-stunt-helmetfinally-started/ I used a dremmel with a sanding bit, lexan scissors, and sand paper. Like Glen said " a lot of sanding and trimming" and a lot of patience. Most people definitely try for the tightest fit, as did I, however it's your preference on how tight. Look at movie reference pics and also the Expert Infantry and Centurion requests section where you'll find a bunch of photos with close ups of other troopers helmets. Quote Link to comment Share on other sites More sharing options...
mr_speed[TK] Posted January 28, 2013 Author Report Share Posted January 28, 2013 Unfortunately that left ear piece is the second one...the first one was trimmed too much. Where do I need to specifically trim to help get that tighter fit? Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted January 28, 2013 Report Share Posted January 28, 2013 It depends on we're the ears are touching, if you hold the ear tight against the helmet then go around the base of the ear with a pencil it will leave a line where you need to trim. Ears are hard and take a lot of work to get right. Just hang in there once you get one right the other will be easy Quote Link to comment Share on other sites More sharing options...
mr_speed[TK] Posted January 28, 2013 Author Report Share Posted January 28, 2013 Thank you, I appreciate the help! Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted January 28, 2013 Report Share Posted January 28, 2013 There's a nice ear thread here Quote Link to comment Share on other sites More sharing options...
mr_speed[TK] Posted January 29, 2013 Author Report Share Posted January 29, 2013 Awesome, thanks bro... Quote Link to comment Share on other sites More sharing options...
NewTrooper2 Posted February 12, 2013 Report Share Posted February 12, 2013 (edited) Home Depot sells tubes of white silicone tub and tile filler/grout called Polyseamseal "High Gloss White". Used it to fill my gaps, smoothing it with a wet finger before completely hardened. Flexible while soft, and dries white. Waterproof, heat resistant, and doesn't shrink. Once dry, I painted over my entire helmet with Valspar Outdoor furniture white. Can't even tell the silicone filler is there. I posted pics and sealant idea in other topics. Here's a link to the ear gap discussion. http://www.whitearmor.net/forum/topic/14758-any-tricks-to-deal-with-the-ears-gap-properly/page__fromsearch__1 And here's a link to the topic with my finished bucket pic. http://www.whitearmor.net/forum/topic/16064-a-good-clear-sealant-for-buckets/page__fromsearch__1 Hope it helps! Edited February 12, 2013 by NewTrooper2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.