-
Posts
2,183 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Frank75139
-
-
Welcome!!!!
Sent from my iPhone using Tapatalk -
Well, round and round we went with contrasting advice in typical FISD fashion, where the only thing learned was yet again, things can be done multiple ways to achieve the same result if done properly.
Was it ever fixed?
Sent from my iPhone using Tapatalk -
its not a question of making the hole bigger, regardless the size of the bit because of the high heat created when drilling out the rivet the plastic area around the rivet will just melt.
Mark (AP)
Small bit, slow and steady. If they don’t feel confident they won’t do it.
Sent from my iPhone using Tapatalk
- 1
-
But should be specified because someone who never did it assumes you just drill out without consequences, even small drill bit creates enough heat to melt plastic especially if plastic is thin.
Mark (AP)
Ok, I just assumed common sense tells someone that if you use a bit bigger then the rivet, it’ll obviously make the whole bigger, therefore a smaller bit would be adequate. Which would mean if done properly the bit should’t really hit the plastic that much.
Sent from my iPhone using Tapatalk
-
Drilling out the rivet will melt the plastic so I wouldnt suggest that
Mark (AP)
Not if you do it right. Small drillbit it’ll fall out
Sent from my iPhone using Tapatalk
-
Glue the elastic end with a small amount of e6000 so it’s temporary. When your done the troop, drill out the rivet and put in a new one.
Sent from my iPhone using Tapatalk -
Welcome!
Sent from my iPhone using Tapatalk -
That’s the aftermath of a good party right there
Sent from my iPhone using Tapatalk- 1
-
Let the fun begin!!!!
And if your wondering I started with the biceps, they are small and most of it is hidden under the shoulder so if it’s not 100% it’s not noticeable.
Sent from my iPhone using Tapatalk -
Hey Rob welcome. Looks like your on the right track with everything. Good luck we’re all here to help.
Sent from my iPhone using Tapatalk -
Welcome! We definitely need some more FOTKs in here. Glad you found your way to the detachment.
Sent from my iPhone using Tapatalk -
So the question comes up often about how to differentiate FISD coins. Especially the earlier ones. It is certainly difficult. Here is a breakdown for everyone on how you can identify what you have.
V1 and V1.1 are the only two versions that have the fist on the back of the coin. V1 is a larger fist with 3 knuckles showing. V1.1 has smaller fist with 2 knuckles showing.
V2 and V2.1 are the harder ones to differentiate. Both started using the E-11s on the back. Both of them say "First" instead of "1st" on the front of the coin. The real only way to tell them apart is V2.1 has thicker text and the blue on the back of the coin is darker.
2.2 and 2.3 (newer coin). The easiest way to tell these apart is they both now say "1st" but the 2.3 has a black elbow and the 2.2's arm is all white.
Even after someone reads this I can promise you that it will still seem confusing. Anyway, I hope this helps you Paul in figuring out what you have. This goes for everyone else as well.
Maybe you could send me one of each version so I could see it more clearly...
Sent from my iPhone using Tapatalk
- 1
-
I personally have AM and love it. It’s thick and sturdy. It’ll need some trimming because it’s bigger but it’ll fit you no problem. I’m 5’10” and was about 240 when I built it. I wore it at 260 and it was still good. You’ll have a bit to cut off but at least you know you’ll get a quality armor.
Sent from my iPhone using Tapatalk -
Sadly, I have had little to no luck finding older FISD. The oldest one I have is the joint FISD/Mos Eisley PD coin. All my other coins are made late 2018 to present, excluding any of the special versions like Command Staff. Always looking though.
It’s very hard to start now and get older coins. Nobody wants to trade them for newer coins and the market is flooded with newer coins.
Sent from my iPhone using Tapatalk
- 1
-
Not making any collection, just received as a gift and bought some of them that really like . and a "V" Buck from Fortnite Video game as well
That Costa Rica one is on my list of needs if you ever feel like unloading it.
Sent from my iPhone using Tapatalk
- 1
-
Plain and simple. My name is Frank my badge number is 75-139. It’s just became a “username” for everything. Easy to remember, unique, and meant something.
I was just happy they had it as an actual TK number when I got in.
Sent from my iPhone using Tapatalk- 4
-
What would the size difference be between the front and the back?
Sent from my iPhone using Tapatalk -
Thank you Frank, didnt get your either is it a gmail.com ?
It is Gmail. Just sent one from a Yahoo address I don’t use as often but it works.
Sent from my iPhone using Tapatalk
- 1
-
Email sent
Sent from my iPhone using Tapatalk -
Well I can’t add much but welcome. We will do all we can to help along your journey b
Sent from my iPhone using Tapatalk -
You won’t be disappointed with AM. I was 5’10” 240lbs when I built mine and trimmed a bit off. I actually went up to about 260 and it still fit. It’s got plenty of room. Make sure to start a build thread. Those of us without builds like watching the fun unfold. And make sure to ask lots of questions we like to help too. Congrats on the purchase and welcome.
Sent from my iPhone using Tapatalk -
Good luck!
Sent from my iPhone using Tapatalk -
I've send an Email already and waiting...
Might take a few extra days so don’t get discouraged. Some garrisons come to a complete stop around this time with Legion elections in full swing.
Sent from my iPhone using Tapatalk
-
Couldn’t have said it better then it was just said. Welcome aboard. We are all here to help.
Sent from my iPhone using Tapatalk
David G AM 4.5 ANH Stunt Build Thread
in ANH Build Threads
Posted
Nice work David, it’s coming along nicely.
Sent from my iPhone using Tapatalk