MStalkid

Ah perfect! Just thought it was worth mentioning =]

Watching this with EXTREME interest. I know that there is already a set of CRL's being formulated also for the Executioner: https://databank.501st.com/databank/TK_TLJ_Executioner Also from another Executioner build thread from Daetrin; https://www.whitearmor.net/forum/topic/42806-executioner-stormtrooper-build-jimmiroquai-set/?do=findComment&comment=574668

Well my blaster is almost done printing. So have another photo of shiny 3d parts Still just waiting on things to get to me currently so unfortunately besides the 3d print stuff I don't have much to add haha Started gathering materials for a scratch built Laser Ax. Aannndd...that's about it! More next time

Yeah I have this set as fine as I can currently with the nozzle I have installed. If I changed my nozzle I could get an even finer thickness setting but double the print time ha. Just the "main" sections took 51 hours to print. Agree completely! As these are I think all I would have to do is fill with a little bit of spot putty and then filler primer!! Should finish printing in the next couple of days. I was going to be competing in a cosplay contest at the local con but I just got my refusal letter. So more fun time with 3d prints for me! Maybe more goodies will show up and I can mess around with things till my armor shows up eventually

0.15mm layering I'm pretty sure. I would have to grab the nozzle but it's my medium nozzle (.2mm I think?). I have a finer nozzle that will enable me to go even smaller both diameter and layering.

Got my Imgur all situated. So here's a photo dump for my 3d print stuff. Had to delete the first couple photos for space on here ha. I love this printer! Straight off the printer with no finishing. Looking like something!! Two more batches after this then smoothing (not that it needs much!!!!) Also got my order into Jimmi for my armor and TLJ bucket as well as pouches. Everything is basically ordered for this build! Sorry it's so 3d print heavy until more goodies show up

I used to use photobucket...until the dreaded 3rd party money wall showed up. Guess it's time for a imgur haha. Also this just got REAL. My aerator showed up to my house!!! My first part of my kit is officially here. It's real now. This is crazy. Ha!

Thanks Ensi! I agree it is. Soooo...lots of stuff in shipment to me. But nothing arriving yet. Haha. So photos of actual kit bits will be down the road. I'm on round 3 of my printing of my blaster rifle. I wanna post photos buuuttt....no idea what site to use. What sites do you guys use for photo hosting so I can bombard you will 3d print photos hah.

This makes me incredibly happy.

I'm guessing so too. This is my first 501st kit, so I'm going balls to the walls!

And so I say...rise from the plate...and yet...i shall miss almost every shot when you're completed!

Assimilate! One of us! One of us!

Let me pick my jaw off the floor....know what build I'm following when I get my armor!

Anyone thought about using the black temporary wheel spray stuff for temporary Executioner action?? It might be too shiny though...

Thanks Q. I'm relying heavily on your Ax build for inspiration

So they would fall under the FISD and not the SpecOp's then correct? Since they are a division of the Stormtroopers and not a entirely separate unit?

It's from the Anovo site. If you large their photos and open in a new tab, you can zoom in crazy close.

Hey all, So I figured I would start this as I have confirmation in quite a bit ha. This all happened a lot faster than I expected. What started as meer digging became a full build. Go figure! I don't have basically any photos as a lot is in transit ha. But here is what is going on, and going big so I'm doing it right the first time! Belt from JAFO is on the way Commissioned gaskets, harness and seal from Soulart My new aerator is coming from VaderPainters ImperialBoots has confirmed shipment of boots and gloves. Got on a wait list on the metal holster from R2Dan Basically all that is left is ordering my TLJ armor from Jimmi (going to happen soon) and get soft pouches. As for weapons I've started a scratch built Executioner Ax but don't have pics or much to show. I'm also 3d printing my blaster rifle (standard rifle) so have a teaser photo! 38 hours left on the first parts. Then I'll start the second grouping.

Figured I would throw these up for kicks. Found these browsing the new Journey to the Last Jedi cards. They are the Executioner but still should show some details. and did anyone notice that although the rest of the troopers helmets changed, Phasma still has the Ep7 look? Thought that was interesting.

Jeebers....I'm really glad I didn't jump the gun and grab their TLJ Executioner bucket. I might have gotten it in time for EP:9 though But that is unreal. Seems like the black marks are just multiplying against them in the last few weeks.

Sweet good to hear!

Hey all, So researching my brains out and I think I've decided to go with Jimmi for a FOTK armor and TLJ helm. Question. I am 5'9" and 200ish lbs. Losing weight currently. I'm definitely a endomorph body type from weight lifting. Would this be a good kit size wise? I know some are tailored for different body sizes Edit: just found my own answers on his rpf. From Jimmi " 5'7" - 6'1" and wide range of girths"

Agreed as long as this is headed towards the CRL for the TLJ direction Wanting my first approved suit to be TLJ.

From the behind the scenes video there's two here. -------------

Would the official figures like the Hot Toys one be enough to pull comparative detail from? Or I'm guess CRL is from the screen used suits hah.