CableGuy

Hi Andrew, That's very kind (especially considering the current state of the tube stripes lol). I checked out your Centurion application pics - very impressive detailing on your lid. Dan

Wow, this learning curve can be a drag. So, I have found that one template was removed a little too soon and the other was removed a little too late!! The latter has reacted slightly with my top coat leaving lines. Add to that the Frogtape that has reacted with the tube paint and left 3 round surface marks. I have quite a bit of touching up to do as there are a few bleed areas. Then, from what I've read, I should be able to use something like Novus polish to bring the tube back to a good level. Does anyone have any advise on polish to help fix the affected areas? Sent from my iPhone using Tapatalk

Hiya Mike, Thank you. I saw both methods before starting and might give that a try next time. I still have some touch up to do, just waiting for my Humbrol Gloss White to arrive. I'm treating this helmet as a test run really. Finding out what works and what doesn't. Hopefully it won't be too long until I'm working on a full kit on the way towards 501st (UKG) approval. [emoji1][emoji1][emoji1] Sent from my iPhone using Tapatalk

Evening all, Had my first attempt at the tube stripes this evening. Note to self - let the paint dry for longer before removing the templates!! ;-) Using TK4510 templates again. Using a pencil width from the cheek. Took a while to get the placing of the templates as desired but ended up okay. Peeled one of the templates off a little prematurely so will have to do some touch up work tomorrow. Sent from my iPhone using Tapatalk

Hi all, More progress tonight with the trap stripes. I ordered templates from TK4510 (Trooperbay) and followed his tutorial. His templates are for an organic, hand drawn ANH style. Next up, tube stripes. :-) Sent from my iPhone using Tapatalk

Looks superb. :-) Sent from my iPhone using Tapatalk

Brow trim re-added last night. Also spent some time tidying up the paintwork on the traps. Need to get some gloss white to help with the touch up. I've read a lot about how to tidy up the hand painted part using thinners (for example). Problem is, when you've spray painted the whole helmet, (rather than painting the details direct to the plastic), thinners will eat your base coat too. As such, careful use of the other coloured paints is key to tidying the pinstripes. :-) Sent from my iPhone using Tapatalk

Hi all, This evening I've been frightening the life out of myself with pinstripes. I had a couple of test runs and then got to it. A few bits need to be adjusted with a toothpick once the paint dries. I'm quite happy with it so far but open to comments/suggestions. The line thickness looks reasonable and I'm hoping it'll look accurate once the tweaking is done. Sent from my iPhone using Tapatalk

More fun tonight. I've gone for a specific trooper for my vocoder. Sent from my iPhone using Tapatalk

Many thanks. Still learning all the acronyms. :-) Sent from my iPhone using Tapatalk

Looking good. (Great garage space by the way) :-) Out of interest, (and please excuse my ignorance), what does WTF mean in this context? Assuming it's not the obvious "what the"..... [emoji6] Sent from my iPhone using Tapatalk

Much better. Great job with the tidy up. :-) Sent from my iPhone using Tapatalk

Here's a before and after (well, before and now)... Sent from my iPhone using Tapatalk

So, it looks like the paint WAS dry - I just left a slight fingerprint on the gloss surface. As such, I continued with painting the grey areas. I must say, I'm dreading the black pin-striping. [emoji51] Sent from my iPhone using Tapatalk

Hi all, Made a start on the details today. Lightly marked my boundaries with a pencil, then started on the grey areas. Quite pleased thus far. I did notice a slight fingerprint mark in the cheek though - as such, I don't think the gloss white has fully dried (even though it's Sunday night and I finished spraying at 11:30am on Thursday). Oh well, no need to rush. :-) Sent from my iPhone using Tapatalk

Hiya,Of course. https://youtu.be/T2OK1wYntio I found his videos an outstanding source of knowledge. He's incredibly good at what he's doing, and explaining it clearly at the same time. He also did a thread here: http://www.whitearmor.net/forum/topic/2066-te2-stunt-build-upte/ Hope that helps. :-) Sent from my iPhone using Tapatalk

Hi all, New to the forum, after years of stumbling across useful info as I drifted in and out of my life-long obsession with Stormtroopers. :-) As a kid, my brother and I always wanted to be Stormtroopers. Whilst searching the net over 12 years ago, I spotted a couple of UKG TKs at a show of some sort - in the background was a banner for SDS Props.... and so it began. It wasn't long before I purchased my 'Stunt' trooper, number 330, and collected it in person from AA. This was later joined by the Tie Pilot and matching busts for both. Sadly, the years took their toll on Stormie and he started to yellow. So, after umming and arring for ages on what I should do, I attempted selling through a well known auction site - but nothing. So, I carried on researching and came across Mike (from Trooperbay)'s YouTube videos. Renovation time: I started by removing all of the decals, then carefully disassembling the helmet. You can clearly see the high level of discolouration, specifically under the tube stripes and brow. From this point, and following advice from this very forum, I sourced the paints, ordered the relevant templates from Trooperbay, and started prepping for paint. One cleaned (isopropyl alcohol), I was ready for primer. I went for Halfords (UK) white primer. The first coat was very light. Second coat helped to tame the yellow. Being very new to spray painting, I read that I should sand this down a little to take the rough surface away. 600grit sand paper. Here are four stages of prep: I was happy with the primer surface. I went for Halfords Appliance gloss white (as suggested by a few members) and started with coat one. Now, I'll admit that I didn't rewatch the tutorial before this part so wasn't intending to spray, leave for 5/10mins, second coat, leave for 5/10mins etc. As such, I was not getting even results and applied too much paint at one point, giving an undesirable 'tear' under his right eye. So, tried again, this time trying to improve my spray technique. Results were average, now with a tear on the rear, the right tube and an uneven coverage. So, went back and rewatched Mike's tutorials. Sanded down the whole helmet, cleaned up again ready for painting. Then, third can of spray paint and much better time keeping. First coat: Second coat: Final coat: For my first attempt at spray painting, learning how to work with the paint, getting the paint to the right level just before it runs, I'm really happy with the glossy finish. Now just need to find the time to start hand painting all of the details. TBC [emoji1] Sent from my iPhone using Tapatalk