-
Posts
4,630 -
Joined
-
Last visited
-
Days Won
97
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by TheSwede
-
-
27 minutes ago, LEGOeatPokemon said:
Right place?
- 1
-
7 minutes ago, fishgoh0nk said:
working on it with an exacto
I wouldn´t use an exacto to make the mobility cuts, a dremel would be my go-to.
9 minutes ago, fishgoh0nk said:, is there something I need to look for to judge the placement/type of mobility cuts after that step?
Not really except making sure it won´t go past the ridges. To make it more comfortable (if not cutting for mobility) and also stronger is to leave a couple of mm of the edge and glue som strips of abs on the inside and sand it smooth. That way even if there´s contact it won´t hurt and you can be more foreceful when climbing those stairs without damaging the armor. All within reason of course
- 2
-
10 minutes ago, fishgoh0nk said:
I also wanted to make the cuts before pasting
Well maybe if going full throttle with a tin snip there´s a risk but if beeing careful or using a dremel there´s nothing to worry about. Either way the choice is yours
- 1
-
11 hours ago, chiefbonan said:
Hey all, whats the best way to mount the visor in the helmet?
I use the ear screws, really easy and screen accurate. Also allows airflow.
-
I would avoid making any cuts just yet, doesn’t look like you need them. Wait untill you have tried it fully finished. You can always make cuts later.
- 1
-
3 hours ago, Lord_Potato said:
So I will remove the bridges
You could try to use 5mm white elastic, that should be all that’s needed and as a bonus screen accurate.
- 1
-
1 minute ago, Frank75139 said:
That’s the aftermath of a good party right there
Sent from my iPhone using Tapatalk
-
When the wife is working the husband tries on different outfits
- 8
-
Updated with latest approval in the center
- 6
-
6 minutes ago, LEGOeatPokemon said:
I also pushed it down a little more a the center to give it more of the angry hero look
That´s it then, it can be low but is should still be straight and not "droopy"
- 3
-
9 minutes ago, LEGOeatPokemon said:
Going back to an earlier post, are the ears ok?
They are good to go Question, is the brow trim pushed all the way up?
-
-
56 minutes ago, fishgoh0nk said:
Would removing some of the butt plate return edge disqualify Centurion?
I don’t think you need to, ”buttflare” is screen accurate and in this last pic yours don’t look bad at all. I would have placed the brackets closer to the edges though as that will aid to minimize the flare. If you’re up to it you could move yours and fill the small holes with a small plastic tab and abs paste. A fellow Trooper @gmrhodes13 has a nice fix for the posterior/kidney overlap he can tell you about
1 hour ago, fishgoh0nk said:I don't think a tighter cod piece elastic would work
It won’t, more likely make it worse.
-
Hi
First make sure the thighs are at an even hight (in the pic they are not) and that they are centered (right looks to be slightly rotated inwards, backview). Dropping the left and rotating the right might be all that’s needed but a front pic would help to make sure that don’t create a too big of a gap between the cod and thighs. I would start there
- 1
-
If you use a hosting site like Imgur you can upload all you want
- 1
-
Hi Matt and welcome to FISD
-
17 minutes ago, mikidymac said:
Well, it's been another month so I assume at this point everyone heard back from Anovos and their kits have shipped?
Maybe I'm the only one that didn't get shipping notification, LOL.
Nope, me neither
- 1
-
Ah yes, probably SpecOps. Anyway, for uploading photos I recommend using a hosting site such as Imgur, works a treat...even at SpecOps
-
Hey Jeremy and welcome to FISD
Really looking forward seeing the build and what the kit looks like and the helmet almost complete eh? Well then PICS please
Also be sure to start a build thread as that will help greatly in making this a 501st costume
- 1
-
Just to make it clear, It’s not acceptable for 501st approval in any Garrison
- 2
-
21 hours ago, LEGOeatPokemon said:
I KNEW they were too big!
There is always something...
Found them! PM me your address and they will go into hyperspace
- 3
-
9 minutes ago, Mar2D2 said:
Is it just me or is the trooper on the left missing their tube stripes?
Sent from my SM-G920F using Tapatalk
No you are correct, that’s Mr nostripes, the one that stuns Leia
- 2
-
7 minutes ago, LEGOeatPokemon said:
Are you sure? That would be greatly appreciated!
Well...almost
- 1
-
30 minutes ago, LEGOeatPokemon said:
I KNEW they were too big!
There is always something...
No need to worry, I’m almost 100% sure I have extras, will check tomorrow
- 2
Help! Broken rivet
in ANH Build Threads
Posted
Rivet on the cod is not to be painted, it should be brass (screen accurate) or silver and 8mm However a rivet is not needed for approval, it’s a L2 requriment. As for ab button paint, humbrol nr14, french blue is a popular choice.