-
Posts
273 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by SheaJeff
-
-
I think my kit must be wrong; I have too many pieces on the back side.
-
I wanted to use the magnet method I saw somewhere here but was told it couldn't be approved even for basic with magnets.
I'm about t to glue my shin Velcro too so I'll be interested in responses the your question.
- 1
-
I bought a little plastic jewel at Micheals but would love to have something more. It fits down in the barrel hole and looks better in person than this picture. I'll be watching this thread.
-
As for the knobs, I would stick with the milk jug caps or something similar... A big glob of E-6000 underneath each one will hold them on nicely.
I'm not going to sweat the knobs right now.
If guys can get approved with packs that look like Ghostbuster packs, then hopefully this will be ok. If not they are easy enough to change.
-
Here's my favorite Under Armor compression shirt:
-----------
-
-
Making good progress on the backpack.
I'm pretty happy with the way the vent turned out. I used some Plastruct channel and an thin textured ABS sheet with some small pieces of scraps from the armor (for the spacers).
-
I have that one from eBay. It's over 100 pieces, requires about a million hours of sanding and is a ton of work. I haven't bothered to finish it. I wish I hadn't spent the money and time on it.
- 1
-
How are you able to sit in the fire truck and the roller coaster?
- 1
-
-
-
I just glued the back to the top on mine and have this gap as well. I wasn't excited about it but others told me they have the same thing.
-
Tape around the area to be drilled with duct tape to protect the surface. It may help.
Also, start with a smaller drill bit then move to the bigger size you need. It's easier to drill and align with a smaller bit
-
You're my hero! Congratulations!
-
How tall should the photo box be?
Do I glue the box to the lid, or cut a pieces of plastic for the "back" of the photo box for the radio?
-
Making some progress on the slanted box:
- 1
-
Wow! $50. Considering I already have the same stool, but with an MG logo, and would rather buy armor accessories, I'm going to pass.
Amazon is pretty amazing. I've been buying from them for 20 years.
-
i have added the d ring and drilled out the front sight on the hyperfirm since the photo
How hard was it to do this?
Please provide details. Thanks.
-
Allan,
WHERE did you get that stool???
-
Can I just put a flat piece on the top of the cup or do I need to build a funnel on top of it?
-
Will the top of this cup work or do I need to change it to be more like the funnel top?
(this one looks more like the TD packs and I'm wondering if it would be acceptable for a HWT pack)
-
So I received the PopIt containers from Amazon as others have used. Now I need to figure out which sizes to put where.
Please advise; option 1 (with the smaller sizes at the top) or 2 (with the bigger sizes):
Option 1:
Option 2:
-
I'm not sure whether or not to keep spending time assembling mine; I just ordered an E-11 and DLT-19 from Hyperfirm for $400 and I know how great these are for trooping.
-
What did you use for the end caps on the side tube?
Are the rom/fx guys still in buisness?
in Electronics for Helmets / Blasters
Posted
I've got an open order with him and just heard from him last week that his current build should be shipping to us soon.