Kenny_a

no, I found it from a Chinese airsoft website, had to pay additional 150€ :/ the website was ehobbyasia.com

Well, originally it was build for trooping but it turned out more to be a display piece, but I think I will troop with it occasionally

Thanks!!! I Just weighed my blaster and with everything on it, it comes in at a perfect 3,5 kilo. the power cylinders are based on Andy’s power cylinders and other builds from Novakdimon and many others out here, a bit of everyone’s design, which I am thankful for that this forum exists!! I have a few pics of those during the build process so if you want I can post those as well

Hi guys!! I wish i had a build thread in mind during this conversion of an S&T airsoft sterling to an ANH E11 Anyway, what i did was cutting down the magazine clip, after that i found a piece of steel to bend for a scope rail. The scope is a real vintage scope. Hengstler counter is a replica bought from blue snaggletooth. The T tracks came with the scope, but i don't remember who i bought it from And the power cylinders are scratch build by myself. I did some small weathering here and there, not fully sure if it is finished Here are some pics, I hope you guys like it Here are some close ups of my power cylinder, the capacitors are sculpted with FIMO clay Hengstler counter replica The airsoft won't allow a spring in the sterling that reaches all the way to the bolt, so i cut out some hose to fit it and painted the ribs to give the illusion it is a spring Real scope Like i said this is the first time i did something like this, and i really enjoyed building those power cylinders But i am very happy with the result, in the future i will replace the red lens of the scope to one of those fancy lenses maybe a weathering pass once more, not sure yet. feedback is always welcome Now back to my TK build!!!

Thanks!

I mean how big is one square, I bought a piece of mesh, I eyeballed it but it was too big.<br> So some measurements would be nice.

Like the title says, does anyone know the correct mesh size?how many millimeters?

Ok that is a clear reply, thanks!

Ok Thanks!<br> Until I find a better rail, I will use this one for the moment.

I am converting an S&T sterling airsoft into a E11. For the scope rail i have found this steel part and gave it a bend and trim to use as rail. Now having the rail attached to my blaster, i seem to notice it might be a little too thick (4.5 millimeters or 0.17 inch) Is it acceptable? or do i really need another scope rail?

Ok so i wanted to alter the hovi mic tips of my anovos helmet.<br> i went to the store and bought what seemed to be okay for the grid but seeing it next to the helmet, it looks too big?<br> can anyone tell me if this is the right size? I am not sure but I think i posted this on the wrong section, sorry if I did :/

Here they are the other way around, it did feel more comfortable but idk not sure...<br>

Ok I am working on the shins at the moment, but with all that label mismatch by Anovos and such I better ask first if mine are ok or not.<br> I haven't trimmed the overlap in the back yet, I also go for the bra hook method.<br> Idk if you can see it on the picture but the longer sides are on the outside, but I read here and there that they should be on the inside and some say the other way around so ...

Cool thanks, I really appreciate that!!!

At the moment I am working on the shins, after that the thighs, then I will do the small finishing touches and begin strapping.<br><br> I will soon have questions regarding the shins wether they are correct or if have a wrong numbered pair.<br><br> Thanks!<br><br> I was really overwhelmed when I got my kit but after seeing a lot of builds I was confident enough to actually do it, after time i see it is not that hard <br> I am also trying to find a way to modify the belt in a way I don't need to remove anything...but make it centurion acceptable

Ok it has been a while, with all the festivities and such <br> So I have build the fore arms and biceps and the shoulder bells, not that I needed to do much on the bells.<br> I still need to cut of some parts sticking out, keep that in mind <br> I need to make some more pictures :/<br> Big thanks to ukswraths build and many others who's build helped me to do this

Yeah, I know, the last picture doesn't quite show it well, but I know what you mean, still thanks

Ok so I have my Anovos armor for some time now, after looking at builds and learning something new almost every day, I finally am confident to actually build it <br><br><br> So I trimmed everything, and i am going to start with the fore arms, the first fit I have done, does this look ok before start trimming it to size?<br><br> I cut here ,right?

They are still there, being used. Eagerly waiting when they will be replaced by modern tech

Yes I got it today, had to pay 30 € ! <br> Anovos better had put it in the box the armor came in!

Mine is stuck in customs for a few days, still waiting for it to get here...why does it take so long ,I mean it is just a plastic envelope with some pants, shirt and some rubber gloves...

Does everybody got a patch with it? Cause I got none :/

I ordered mine on the 3rd of april.

Mine arrived today, and have to say they fit like a glove!!!<br> Thank you very much imperial boots! <br> Also thanks for the shipment reduction I've won!!

Hey guys, are there people here who didn't get the soft goods yet? Cause I'm still waiting for a confirmation mail or anything. Starting to get worried here...