Holnave (evan_loh)

It's just a gap. I trimmed it a little too much. Would be nice if there was a way to hide it without trimming the circular part on top too much

These are the shins I've been working on.

Are you talking about both the sides or just the side in the second picture. And if I were to move the rivets what would you suggest that I use to cover up the holes I have punched for the earlier rivets?

Thanks for the advice Paul. I've been taking some screen shots from the movie and been trying to get some close up shots I have swapped the sides (of course with new ones ) I will paint them white with my humbrol soon.

I have seen an RS build (I have referenced it somewhere) using the rivets with the holes. I can always get some extra rivets from the store nearby but if it affects clearance I will change it

Am I right in saying that these straps are glued to the insides of the shins (3 a side and with an equal distance between each) with the hooks hooking on to 3 drilled holes per side? And with the cover strips glued only to the outer side of the shins. My references are from these links: http://s196.photobucket.com/user/joker1231978/slideshow/Armour%20Details http://s381.photobucket.com/user/gcl2g5/media/LFL%20Photos/ainsworthlowerleftlegrearseamdetail.jpg.html?sort=6&o=6 http://s196.photobucket.com/user/joker1231978/slideshow/RS%20Props%20Armor

If any armourers could help, I've been trying to find some good links and tutorials or WIPs to see how the back of the shins are made. From what I've seen so far the shins aren't glued to the cover strips at the back and I've seen some pics of straps inside but I haven't found one clear enough to have a good look. Any suggestions? :S Thanks

Thanks! So I've got the cover strips for the thighs and will start working on the shins when I can get more glue for the cover strips As Echo has stated I've decided to go for the capped rivets:

Ah I see. These rivets were part of the accurate strapping pack that I purchased from RS Props. I believe the split rivets are for the abdomen area. After some research the rivet that I couldn't identify was in fact a double cap rivet http://www.tandyleatherfactory.com/en-usd/search/searchresults/1371-12.aspx I think it's what was used in: http://s196.photobucket.com/user/joker1231978/slideshow/RS%20Props%20Armor I'm still figuring out what rivet goes where :S

For the thigh ammo pack: Which of the two should I use? I know I should use the split rivet but I've seen from different sources that they used the one with the hole in the middle and I don't really know how to use that one as it doesn't seem to have the split: http://s196.photobucket.com/user/joker1231978/slideshow/Armour%20Details http://s196.photobucket.com/user/joker1231978/slideshow/RS%20Props%20Armor

These are the pictures of the biceps and forearms I've been working on. Trimmed it to fit and glued the cover strips. Unfortunately I don't have an electric saw to give a clean cut on the cover strips:

Does any know how much space there should be inside the fore arms? The estimate in the picture is very loose in my opinion but I want some advice before trimming more

I'm also wondering if it is advised to follow the builds of the following individuals: http://s880.photobucket.com/user/dashrazor/library/joeR%20pics?sort=3&page=1 and http://s381.photobucket.com/user/gcl2g5/library/LFL%20Photos?sort=6&page=5 *edit* I have found a good link on this thread http://www.whitearmor.net/forum/topic/24122-rs-props-armour-build-by-rs-props-reference-pics/ for RS builds. So I guess I'll use that as my main reference

I have read to keep "a fingers width all the way around if you want to taylor to fit" as quoted from one of the armourers in: http://www.ukgarriso...=43446&start=30 So with that in mind I taped the biceps to give an estimate on how it will fit and look on me. Currently I've managed to keep the "finger width all the way round" rule: Right bicep Left bicep

I will continue building this thread as my WIP. I don't think I can change the thread topic to add a WIP so if that is required let me know. Currently I have trimmed the ears on my helmet to keep the curves closer to the tube. I have trimmed a little too much on the right ear curve and so it looks a little bad. I have tried trimming the round parts more but still try to leave the distinct bump of the Stormtrooper ear. Left Right

I'm evan_loh in UKG. I have been told to use photobucket and I am currently uploading my photos in photobucket

Hello fellow members of the Empire. My armour kit ordered from RS Prop Masters arrived today and I am very excited to take my first step into a larger world! I was wondering if I could get any advice on trimming through upcoming photos I will post and I was also hoping if anyone knew of any recommended videos out there. I will be posting the current pieces I have down below (including the strapping packs). There are lots of pieces and its leaving me very flustered hehe. I would really appreciate your help in helping me to understand the pieces better and guidance in my journey to complete the armour. The tools I have (and will be acuiring) are: a sharp knife, rotary tool, sand paper and glue. Let me know if I would need more. (I will be posting a similar post in the UKG forums) I am trying to upload photos but their size is too large. Where should i upload them? Thanks

I've just got a whole new kit from them. Gonna have it pre-painted but not assembled! Can't wait to start my journey into this next level of fandom I also know how it feels to wait lol. There are times they reply very promptly (withing 10 minutes) and sometimes 2 days. But overall I'd say they have an efficient service.