Murderink

The back section needs to have the indentation on the top section and the oii section needs to protrude more see image. Hope this helps, I have been working on the chest and back myself. Sent from my iPhone using Tapatalk

Head over to Armored Cavalry Sent from my iPhone using Tapatalk

The boots on the Anovos are way to tall, should come to mid calf level. Sent from my iPhone using Tapatalk

Requesting 501st access TK-27481 TI-27481 Knightfall Squad Terror Australis Garrison http://www.501st.com/members/displaymemberdetails.php?userID=17125 For some reason my 501st / Stormtrooper status has gone. Sent from my iPhone using Tapatalk

Here are some pictures of the build. The spare room was a complete mess and the wife was not happy with all the white dust and bits stuck in the carpet haha. Getting the legs shimmed up Making all the snaps. I had forgotten how much I hated this part Putting snaps into the groin and butt plates I cut out the 22mm x 22mm section from the kidney plate and marked and drilled the holes but was not happy with the placement so I redid the holes and was happy with the placement, need to get some more acetone to make up some more ABS paste to fix the holes. Then I added the single snap to the right side They were the last of the build photos I took as I was speeding through it to get it completed for the next morning. Will post up more pictures of the completed build this weekend. Sent from my iPhone using Tapatalk

Well I finished the whole thing at 5:00am Saturday morning in time for our Australia Day troop, still awaiting the ESB hand guards, new thermal detonator and working on a new holster & belt. Also have to fix up the belt for the thighs as it dropped during the march which made things quite uncomfortable and as seen in the pics the thighs look a little to low. Here are some images of the finished product to date Sent from my iPhone using Tapatalk

Been working on the arms and legs today. I have made all the cover strips as follows: Arms upper and lower - 15mm Legs front - 20mm Legs back - 25mm ( I still need to shave these down by 0.40mm to get them exactly on the 25mm mark) I still have to take off the return edge from the wrist section of the forearms, any feedback / tips are appreciated. Sent from my iPhone using Tapatalk

As per your advice I have repainted the frown and taken out the black from between the teeth. Also added the tube stripes, visor and started on the ears. Sent from my iPhone using Tapatalk

Awesome thread dude, I am about to do the exact same thing on the new kit I got as the thighs as a bit too small for me, probably due to all the stairs I climbed while in Mexico [emoji23]. Sent from my iPhone using Tapatalk

Yeah I did actually as I was working off these reference pics. If I'm wrong please let me know as the lighting on the images is not the best and that's how it appeared to me. Any constructive criticism is welcome. [emoji16] Sent from my iPhone using Tapatalk

Picked up my SE-14R blaster from Border Force after waiting for my permit to be cleared [emoji3][emoji3][emoji3] A bit of clean up on the kit needed, came with a real scope pretty good quality for $50 AUD. After a bit of dremel work it's almost done, still needs a little filler here and there but that can wait. Sent from my iPhone using Tapatalk

Still have to paint the ear and tube stripe details, also going to hand paint the rest of the details when I get time for now the stickers are good enough. Sent from my iPhone using Tapatalk

First thing I started on was the bucket Sent from my iPhone using Tapatalk

Here are some images of the kit Sent from my iPhone using Tapatalk

Hey guys, while I was in Mexico I picked up a kit from a mate - Fan Made (Carlos) and and brought it back to Australia. As this is my second TK have decided to go with ESB for this one, the kit is awesome quality ABS. Sent from my iPhone using Tapatalk

Will add more pictures tomorrow when I'm on the PC Sent from my iPhone using Tapatalk

Thanks for the files, I have started on my complete aluminium E11, thought I would do the folding stock first. Sent from my iPhone using Tapatalk

I have found a stockist of Aluminium round tube with an outside diameter of 38.1mm and wall thickness of 1.6mm. you can choose various lengths and wall thickness. here is the link for Ebay. -----------