-
Posts
788 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Evilboy
-
-
I wish we could get those on this side of the pond...
-
There are idiots that will blame the guns used in this horrific crime but the guns were just a tool. What it all comes down to is this is about a severely disturbed person that was allowed access to the guns (a violation of EXISTING, under enforced, laws BTW) and most likely not allowed access to proper mental health care. There will always be crazy people, and there will always be senseless violence. That is, sadly, part of life. The attacker in China used a knife. are we going to ban knives? Let's focus on getting proper treatment for the mentally ill in our Nation.
-
Any updates on this?
-
It was a pleasure Trooping with you Brother!
-
Looks Awesome! let me just send you my shipping address so you can send that along for a proper "inspection"...
-
This will soon all be a problem of the past. There is a US maker that will have a resin pipe build kit available in the near future. and there will be a full resin kit available at some point. DO NOT DESPAIR!
-
-
I am not going to do the inner barrel hollow at first though. Thats going to be a huge paint to cast hollw, but once i figure out a good way to do it, i probably will.
what about using small diameter PVC tubing for the barrel. I actually used the PVC tube from a set of window blinds...but there are some really small diameter plumbing tubes as well...
-
You should include scope rails and brackets...wink wink nudge nudge....
-
Gotcha! I was not implying otherwise, I was just chiming in from my iPad down in my workshop...
-
I do not know if this has been posted, but Adam had a fascinating discussion on his "Still Untitled" podcast about recasting. Enjoy!
-
a sterling is not 1.25 inches. ( thanks lou for making it clear that your pipe is the outer diameter of 1.5 with a rating of 1.25 see his post below. )
that is WAY too small.
the electrical conduit I use from lowes, is exactly the correct dimensions you can get for a PVC pipe.
if you needed to make it exact then you'd have to use metal pipe.
don't fall into the trap of too small.
the 38mm pipe that I use has a thick wall, and the internal bolt is the only element that would need to be
made smaller in diameter if you're using sterling cast parts. and if you made the pvc thinner by sanding it, or on a lathe, then you
would be able to bend the pipe in your hands.
in the photo above we have lowes electrical conduit.
lowes rake T Tracks made from a leaf rake.
end of tube sanded down to fit end cap.
inner barrel assembly, sight rail and hengstler bracket.
I was just going to say that. Use the 38mm electrical conduit. that will work best...
-
On 11/30/2012 at 9:25 PM, Lichtbringer said:
Sorry for the late reply, havn´t been in this thread for a long time.
It all comes down to the machines you have access to. I assume most people in the hobby only have hand tools, or some machines from Harbour Freight (or something that way).
So most (if not all) don´t have a flood cooling to use the proper indexable tips. Without that you are left with HSS tools, and to make heavy cuts without cooling and getting blue c-chips ..... you need a more rigid machine than the usual "Grizzly" and what else it is named.
In my basement i only have such small machines, too. They are rather small (Mill 130 Kg, Lathe just over 200Kg), but used much more than the others cause i can stay in the warm house in all weathers.
I wouldn´t want to abuse them with heavy stainless work. A small piece here and there, yes - but nothing big.
In the garage i have bigger old industrial machines (i like that, just as others buy and work on old cars), they are not so often used as the above cause the garage is not heatet - but they are much more rigid (yet still under 1 ton class). Nonetheless i don´t wan´t the mess from a massive flood cooling in my garage, i prefer that used with machines in a cabin where the mess stays inside.
I decided for myself that if i need stainless work done, i have it done in a machine shop.
But for sure, the last thing i want to do is working on a stainless piece of unknown alloy with handtools and a harbour freight drillpress. Even if it would be given to me for free, there are easier ways to get a job done.
OMG, that is my DREAM workspace. I simply can not afford even a "Small" lathe like yours, to say nothing of the milling machine. I am SOOOOO jealous...
-
Can not wait for my PM!
-
Hell, I'll ride in a large doggie crate!
-
So she is tall by the 3.75" scale...
-
Welcome from NoVA, Matt! I am just east of Leesburg, so if I can help in any way, do not hesitate to contact me! Make sure you check in to www.va501st.com and introduce yourself!
-
OUTSTANDING!
-
Actually, as long as you do not add a functional barrel, you can weld them all together in MOST US states. Check your local laws. Here in Virginia I can do that without a problem, as long as I make sure it can not function. In NY, especially the five Boroughs, You have Bloomberg and his anti-gun Nazis to worry about...
-
I put one in the front side pointed to the eyes, and one behind my ear to circulate air through the helmet.
-------------
-
Thanks Brother!
-
UPDATES !?!?!?
-
Andy,
Would you be willing to sell these in kit form as well as a fully finished version? I enjoy the process of building these kind of things, and I am handy with tools. You could include the flat metal plate with a template for the holes and such, cylinder components (tubes, caps nuts, screws etc,), resistors/ capacitors, and any other little parts on the full version. I would buy a couple of those, as I am quite sure I can not afford the whole shebang right now...
-
So just heard I may be getting a brown box in the mail soon so best finish this build, hate leaving things half done.
So bit more sanding, few more details and now primer. Going to be 34degC here today so paint will dry pretty quick so no doubt silver should be on before the end of the day.
See it's 34 degrees F here, so no painting for me...
Helmet upgrades: wireless amp, external sound pickups, fan, padding and more
in Electronics for Helmets / Blasters
Posted
Not to , but do you have Prices in mind for the various iterations of this kit yet?