PGHtrooper21 Posted February 5, 2010 Report Share Posted February 5, 2010 I just recieved my Doopy doo's Hasbro E11 conversion kit and also a E11 pipe kit from them is one the way. Is E6000 good to put the kit together or should I get something else? Also, do I need to wash the parts before I begin? Thanks. Andy Quote Link to comment Share on other sites More sharing options...
sskunky Posted February 5, 2010 Report Share Posted February 5, 2010 I would always wash resin parts as they may still have a release agent on them from the demolding process. You can use an epoxy, a super glue and I haven't used E6000 but I'm sure you could. Quote Link to comment Share on other sites More sharing options...
DarkTrooper[TK] Posted February 5, 2010 Report Share Posted February 5, 2010 I've used E6000, its great with doopy doos Quote Link to comment Share on other sites More sharing options...
Rob .T .[TK] Posted February 5, 2010 Report Share Posted February 5, 2010 Good old superglue for mine, I did however buy brand name superglue, not cheapshop stuff. Of course sand teh surfaces to be glued to remove release agent and any paint on teh hasbro ..use fine sandpaper if you are supergluing. Quote Link to comment Share on other sites More sharing options...
pandatrooper[TK] Posted February 5, 2010 Report Share Posted February 5, 2010 I used E6000. Sand and wash the parts first before assembly. Sanding both surfaces will provide more tooth for the glue to adhere to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.