Nairy[Staff] Posted August 30, 2022 Report Share Posted August 30, 2022 (edited) Hello fellow troopers! Some try to paint match with brush and clear coat, some try RAL 9010 spray paint, some paint match and airbrush, some use ABS paste and sand. I have an RS Prop Masters kit that I'm currently trying to paint over a filled and sanded shim seam. I tried RAL 9010 spray paint, but it was too white (I put on many small coats because in the beginning of painting I got small droplets here and there and it just became too thick). I then sanded of everything and started with paint matching and found that Humbrol Enamel Satin 130 worked pretty nice (it will most definitely work and match on your rivets and screws) - and plan to sand it down a bit and maybe put a clear coat on it and then polish up with a little bit of scratch remover or something of that nature. I have 4 small pieces that I have cut off of my Hero belt and Stunt belt, but I doubt those 4 little pieces (2-3mm wide and belt height high) will be enough to create ABS paste. Talking paints then I have heard of people using RAL 9010 spray paint with success, especially for FOTKs it is a great match, but the RS Prop Masters kit is more creamy in its color than that.What colors have you had success with? Please share below as I am dire to hear about your success(es)! Edited August 30, 2022 by Nairy Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.