likemike973 Posted February 16, 2020 Report Posted February 16, 2020 (edited) Hello all, I am working on my blaster and wanted to share the build and seek guidance. I purchased a Doopydoo’s kit and started assembly, T-Jay's finishing kit and FX-BlasterOS. First question is the best way to post my build pictures? Edited July 20, 2020 by likemike973 Quote
gmrhodes13[Staff] Posted February 16, 2020 Report Posted February 16, 2020 Hello many of us use an online image host then copy links into your thread Quote
likemike973 Posted July 20, 2020 Author Report Posted July 20, 2020 (edited) I reinforced the trigger group with sheet metal. I also 3D printed the top of the trigger so I could make the trigger movable. I am now adding a switch and electronics. Edited July 20, 2020 by likemike973 Quote
likemike973 Posted July 20, 2020 Author Report Posted July 20, 2020 (edited) Edited July 20, 2020 by likemike973 Installed the bolt and spring Quote
likemike973 Posted July 20, 2020 Author Report Posted July 20, 2020 Counter completed with my member ID setup. I used an original Hengstler counter for the front, and a 3D printed piece for the back. Quote
likemike973 Posted July 20, 2020 Author Report Posted July 20, 2020 Scope is bored out and I installed the FXBlaster software. Thanks for the help Andras installing the software on my Anduino. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.