kman[TK] Posted February 12, 2016 Report Posted February 12, 2016 Nice job Kalani. Stylish lens you have there Thanks! Umm... but huh? What'd I do? 1 Quote
fltcrw99[TK] Posted February 17, 2016 Report Posted February 17, 2016 So, did you decide yo go with the bracket set? Quote
fltcrw99[TK] Posted February 17, 2016 Report Posted February 17, 2016 So, did you decide yo go with the bracket set? Quote
jr1203 Posted February 17, 2016 Report Posted February 17, 2016 Thanks! Umm... but huh? What'd I do? Haha Quote
DBoz Posted February 17, 2016 Author Report Posted February 17, 2016 So, did you decide yo go with the bracket set? Still haven't decided. Kind of waiting to see how ukswrath's build works out using it. Kind of leaning toward snaps, though because the ANOVOS abs is so thin. It seems like a snap system would be more durable. 2 Quote
DBoz Posted February 17, 2016 Author Report Posted February 17, 2016 (edited) Double post. Edited February 17, 2016 by DBoz Quote
nocjef[TK] Posted February 23, 2016 Report Posted February 23, 2016 I'm amazed your belt came apart so easily. Mine had about a gallon of CA and I ended up cutting out sections of ABS to get it apart safely. I ended up using scrap ABS to shore up and reenforce the damage. It will all be covered up by the buttons which I also get to remake :/ Quote
kman[TK] Posted February 23, 2016 Report Posted February 23, 2016 I'm amazed your belt came apart so easily. Mine had about a gallon of CA and I ended up cutting out sections of ABS to get it apart safely. I ended up using scrap ABS to shore up and reenforce the damage. It will all be covered up by the buttons which I also get to remake :/ FWIW mine was the same as yours. Tons of epoxy inside the buttons. Had to cut them out from the back and reinforce. And now I have to make at least one button cover... Quote
rwbowri[TK] Posted April 28, 2017 Report Posted April 28, 2017 lots of great information you put into the thread. how long did you take from start to finish on this project?? any finished photos??? Quote
DBoz Posted May 2, 2017 Author Report Posted May 2, 2017 lots of great information you put into the thread. how long did you take from start to finish on this project?? any finished photos??? I actually have not made any progress on this build. In fact, I have been absent from the board for quite a while. It was just luck that I happened to stop by here and see your post. My TK build has kind of taken a back seat to my R2D2 build and as such remains in the box in the garage. Some day I will get back to it. Quote
rwbowri[TK] Posted June 21, 2017 Report Posted June 21, 2017 hope that you finish off this build someday and show off your finish work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.