Striker Posted February 22, 2011 Report Posted February 22, 2011 (edited) Who exactly would I email to ask questions about the AM Armor details? When I started my build I noticed the one of the calves did not have the strip detail in the back but the other did. I know I can add a strip of extra ABS but i wanted matching sides . I think the armor is great and have no complaints about the quality or the maker or anything like that just wanted to try to get a matching piece is all. Not sure if it is just my picture taking abilities or my cell camera but the left shin looks funny. I am sure it was just an oversite . Thanks in advance for any information. -------- Edited January 26, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 Quote
Ripcode[501st] Posted February 22, 2011 Report Posted February 22, 2011 A calf half with a "strip" goes with a calf half that does not have a strip. Quote
Striker Posted February 22, 2011 Author Report Posted February 22, 2011 A calf half with a "strip" goes with a calf half that does not have a strip. Great, I see what needs to be done thanks Quote
Striker Posted February 22, 2011 Author Report Posted February 22, 2011 A calf half with a "strip" goes with a calf half that does not have a strip. So basically my left shin is both inner pieces and my right shin is both outter pieces? If so I might have a little problem lol. If so is there a good way to removed ABS weld on?(Doh!)Any help would be appreciated. Thanks in advance. Quote
pandatrooper[TK] Posted February 22, 2011 Report Posted February 22, 2011 AM calves go like this if you were looking at the back of your shins. Outer left (no ridge) Inner left (with ridge) Inner right (with ridge) Outer right (no ridge) They should have either put no ridges at all or had them on both halves. Its fan made and not as accurate as other makes. Quote
Striker Posted February 22, 2011 Author Report Posted February 22, 2011 AM calves go like this if you were looking at the back of your shins. Outer left (no ridge) Inner left (with ridge) Inner right (with ridge) Outer right (no ridge) They should have either put no ridges at all or had them on both halves. Its fan made and not as accurate as other makes. Thanks for the info. I will have to take a look at them when I get home to see if there is any hope to repair them Quote
Hawkeye[501st] Posted February 23, 2011 Report Posted February 23, 2011 Look at the manual that came with the armour, it explains on how to see which is which. Take your time with the build mate, and take it really slow. Before you glue use masking tape and see how it fits. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.