Lord_Potato

I wish I could delete posts as I guess I had a connection issue and my same post was posted several times..... Anyways! I have a few things to do to prep for centurion. First thing is my blaster. Repainted the grip. I think it looks better: Hengslter counter was noted in being in the incorrect position . This is how it came from RS and it looks to be fused to the gun. I am going to try and remove it and reposition it. Just need to go to the hardware store and try and find the best tool. Next issue: My right shoulder tab is not resting nicely on my back tab So I had both shoulder straps shaped to the exact same curvature so I was curious as to why it didnt look right on one side. It looks like it is a combination of the armor not being perfectly symmetrical and the biggest factor....my shoulders are not even! one shoulder is higher than the other. I was aware of this but did not know it was enough to affect my shoulder straps. As you can see the curvature for the right side had to be made more drastic than the other side: Left side: Right side: Though I thought this looks funky......the end result seems to make the straps sit evenly. This is also without the aid of the white elastic straps: *(elastic straps are resting underneath the plastic straps) Next task I am working on is my shoulder bells hovering on top of my shoulders: I really dont know why this is happening......I spent a great amount of time making sure the armor was sized to me pretty well. I think I am going to tighten the strapping system on my chest plate to bring it down a little. I will see if that works first. Any ideas would be appreciated.

I used these tiny sponge tips from testors to paint my buttons on my Walt's ab buttons. If your still having trouble, might wanna give these a try. With these I kinda just drew them on. Also, I had the habit of not mixing my paints very well before use. Really mixing the paint for a few minutes really helps with getting a nice coat. Sent from my SM-N970U using Tapatalk

I am very happy my armor was approved for EIB. Mainly due to the massive help from those of you who have followed me. This weekend I will make the recommended adjustments to have a chance at centurion.

Sha Sha, Thank you for the good news and critiques. I think the main issue for my bells not resting right on my shoulders is that my chest might have to be strapped so it's pulled down another inch. But all issues you mentioned will be addressed before I submit for centurion. Thanks again. Also, thank you for your buod thread. Yours along with crickets and Ukwraith's were the main threads that guided me.

Done. Not sure how I missed that. Maybe I was looking at an outdated requirement listing for EIB. Front of sniper knee plate: Split rivet with washer for interior of thigh ammo pack:

Thank you for the compliment. And your advice on my build thread was very helpful.

I understand there are not a lot of DO's. I appreciate the time you are taking for me. Thank you for pointing out the mic tips. My fault for naturally assuming supplied mesh was the correct size. I think I got it corrected: Installed more accurate mesh, old mesh held up for comparison

I know RS had a fire and are probably busy, but were you able to get your sizes updated?

Your assistance throughout my super long build is greatly appreciated. Looks like you are right about the blaster. The thing is I don't know what to do. The blaster is from RS and was assembled like that. It looks to be mostly resin cast. I would have to physically break it and reposition it. It might be easier to just order a new blaster. I spent so long making the TK I really don't want to build a blaster and I have been looking all over for a approvable assembled blaster. I guess I'll just wait until it's mentioned that is a mandatory change before I try and break off that piece. I'm still looking online for a better blaster.....another reason I don't want to build a blaster is I feel like I might have a chance in making the 500 centurion quota. If I end up getting an unassembled blaster, I think those 7 spots would be gone. I have used this blaster for 2 years trooping so it was badly paint worn. I sanded and painted the entire gun flat black and I painted the grip gloss black. I guess I might do another gloss coat on the grip since it looks like it is weathered a bit.

You have been so helpful. Your RS build thread was the first thread I stumbled across that gave me the motivation to make my own TK. Seeing how you were able to tailor the armor to you so nicely made me realize it was possible.

It means a lot coming from someone with so many beautiful kits. Thank you.

Here's my submission to EIB.

Thank you! I appreciate it and thanks for your assistance during my build.

Name: Jonathan Curtis ID: TK-89054 Username: Lord_Potato Garrison: Tyranus Squad: Sienar Fleet Squad Armor maker: Walt’s Trooper Factory Helmet maker: Walt’s Trooper Factory Blaster maker: RS Propmasters Height/weight: 5 foot 7”/153 pounds Boot maker: Imperial Boots Canvas belt supplier: Imperial Issue Hand guard: Bailybuilddesigns Holster maker: Darman props

When my wife measured me, my arm was relaxed and by my side as well (we made sure the measuring tape was not tight or snug). They biceps fit, but when I do flex, it is a tad snug. Out of all the armor pertaining to the limbs, the biceps were the tightest fit. Looks like you also recently purchased this? RS customer service is amazing and I am pretty sure they probably haven't made your biceps yet. It wouldn't hurt to contact them and ask if you could change your bicep measurement. Possibly a couple things to consider: The gloves they give you (though screen accurate) are massive. Might want to look for rubber gloves of a smaller size unless you have manly man hands. The undersuit they give your is literally a ballerina leotard that RS puts their logo on. It did not do the best in absorbing sweat and it wasn't tight so the cloth would bunch up on the elbow joints and knee joints.

Hey! Looks like you went with the full commission. I hope it's a perfect fit right out of the box. If not there are so many people here to help. As I said before, I had to modify my commissioned RS, so I might be able to give a few tips if it turned out any changes needed to be made.

Well, I would like to see how far this kit can take me. Getting ready for EIB. I just need to touch up my RS blaster, it's been dinged up a bit while trooping with it for the past couple of years. Just need to paint the grip gloss black and other parts with flat black and then I can submit. All of you who have guided me are awesome.

Thank you! And I think I have stormtrooper status now. Not sure how I can verify if I have 501st stormtrooper status.

Requesting 501st access. TK89054 https://www.501st.com/members/displaymemberdetails.php?userID=28754 Thank you

Approved for basic! That was quick lol.

Submitted to GML for basic.

Pre approval submitted. Once approved then on to basic.

INFORMATION: 1. First/last name: Jonathan Curtis 2. Future Garrison/Squad/Outpost or local area: Garrison Tyranus, Sienar Fleet Squad 3. Armor maker: Walt’s Trooper Factory 4. Helmet maker: Walt’s Trooper Factory 5. Cloth belt maker: Imperial Issue 6. Neck seal maker: Geeky Pink’s Phantastic Gaskets 7. Boot maker: Imperial Boots 9. Blaster maker: N/A 10. Gasket maker: N/A 11. Height: 5’ 7inches 12. weight: 153 Pounds 13. TK type (ANH Stunt/Hero. ESB, ROTJ. TFA etc.): ANH Stunt 14. Name(s) of any Trooper(s) who significantly helped with your Build: Gmrhodes13, TKSpartan, Sly11, Cricket, Cableguy, Troopermaster, TheSwede, JustJoseph63. Front View: Back View: Left Side: Right Side: Ab section: Helmet:

Much appreciated I think I was able to adjust my back strapping system better.

I made both bicep straps a smidge shorter and with crickets advice, used velcro to help keep the left side of my belt down. The only thing I forgot to do was slide my drop box on the left side to align with my belt. As soon as I do that I intend to submit. Sent from my SM-N970U using Tapatalk