[TK-61490 Requesting ANH-Stunt EIB Status [Anovos] [807]]

On 2/25/2018 at 3:06 PM, Sly11 said:

There are place holder where the images should be but they are not visible

Helmet front

Lens colour and a few others that I'm not sure what they are

 

More photos if they'll help!

 

Updated my Hovi mic tips to nicer cast aluminum ones with more accurate mesh:

 

Closeups of my shin attachments (no rivets on sniper knee, rivets on ammo pack painted white):

 

Closeup of whole belt:

 

Closeup of helmet S-trim:

[TK-61490 Requesting ANH-Stunt EIB Status [Anovos] [807]]

26 minutes ago, Sly11 said:

There are place holder where the images should be but they are not visible
Helmet front
Lens colour and a few others that I'm not sure what they are

Gotcha. They're visible to me, but I was worried about my hosting. I'll replace them - check back in like 30
 

*Update - ALL photo links have been replaced and should be working now

[TK-61490 Requesting ANH-Stunt EIB Status [Anovos] [807]]

On 2/22/2018 at 9:36 PM, Sly11 said:

The gap between the top of your shoulder bells and the plastic shoulder bridges. These should be virtually touching, it will also help them sit closer to the chest plate.

It also looks like some of your photos are missing, plus could you please add a photo of the end of your blaster showing the D ring.

 

Thanks Justin

Easy fix with the shoulder bells. Let me know if you need me to resubmit photos after adjusting, or if I should just watch for it at Centurion.

 

What other photos are missing?

 

Thanks!

 

[TK-10272 Requesting ANH-Stunt EIB Status [Anovos] [805]]

Yay! Good luck Jessie! It was super fun prepping and taking these pics with ya!

[TK-61490 Requesting ANH-Stunt EIB Status [Anovos] [807]]

Looking forward to Centurion feedback too! I know I need more rivets on my left side, and the random male snap on the ab... I have new mic tips with better detailing and mesh ready to install soon... Interested to hear what else you guys spot!

[TK-61490 Requesting ANH-Stunt EIB Status [Anovos] [807]]

Mandatory Information

• Name = Justin R.
• TK ID = 61490
• Legion Profile = https://www.501st.com/members/displaymemberdetails.php?userID=26076
• Garrison/Squad = Southern California Garrison, Orange County Squad
• Forum Name = TheRascalKing
• Armor = Anovos
• Helmet = Anovos V1
• Blaster= Hyperfirm

Optional

• Height = 6ft 0in, or 183cm
• Weight = 175lbs, or 80kg
• Boots = Imperial Boots
• Ammo belt = Anovos
• Canvas belt = AP
• Holster = Anovos
• Hand Plates = latex, justjoseph63 on FISD
• Electronics = generic Chinabrand wireless mic into TK Talkie V3 (not shown) into Aker amp, UKswrath 5V fan system
• Neck Seal = unknown, purchased secondhand

 

---

 

Armor Photos

 

Front Helmet Off

 

 

Full Body Front

 

 

 

Full Body Back

 

 

Full Right

 

 

Full Left

 

 

Right Side Detail

 

 

Left Side Detail

 

 

Helmet Detail Photos

 

Front

 

 

Side

 

 

Back

 

 

Hovi tip detail

 

 

Lens color (Backlit if necessary)

 

 

Accessory Photos

 

Ammo Belt Holster Attachment

 

 

Neckseal

 

 

Blaster Detail Photos

 

 

Thermal Detonator

 

 

Boots

 

 

Action Shot

 

 

Optional

 

Interior Strapping

 

 

Abdomen Detail

 

 

Handguard Flex

 

 

Cod Details

 

 

Thanks for looking, please let me know what you think! A fellow squadmate and I teamed up to get these done this weekend, so you'll see hers soon too. Thank you!

 

[Need someone with a 3D printer...]

13 hours ago, Jonelli said:

Another alternative, check your local libraries. The Long Beach library here in SoCal has 5 of them in their media lab that anybody can come and drop off files to print FOR FREE. I printed half a F-11D blaster at mine. 

Uhhhhhh.... RAD?! I had no idea, but that's seriously awesome. Great tip in general.

[Voice Changer for Captain Phasma]

Hey Molly,

 

Like the above poster, I use an audio system in my TK armor that works great and has a very large range of easy adjustability, called TKTalkie. The guy who runs it's name is Brent and he's on the FISD boards here as lerxstrulz - someone may have already created a custom voice map for the TKTalkie platform that sounds like Phasma (I know it's also able to be used for multiple character voices with ease). If anyone did, he might know. Or he might just have some suggestions. Hit him up! Good luck

[Need someone with a 3D printer...]

Another option would be https://www.3dhubs.com/

 

I've worked with some great providers I've found through there, and since you can connect to people that have machines locally, shipping has never been bad. I doubt you'll find someone on it who will trade for SW swag, so this thread still has value... but there's another good option if you want  Good luck!

[HWT patch?]

I've been keeping an eye out in the forums and patch trading groups and these are the only two I've been able to find and trade for. The one on the right is from justJoseph63. It's big. If anyone else sees any, post up.

[501st Trooper Status Requests (Include link to your 501st profile in your request!)]

TK-61490 requesting full detachment access. Thank you!

 

https://www.501st.com/members/displaymemberdetails.php?userID=26076

[TKTalkie v3 Released!]

 

On 11/28/2017 at 12:22 PM, lerxstrulz said:

The board has a built-in over-amp circuit that will shut it down and should protect it from getting fried.  Can you connect it to your computer and see if it comes on?

Plugged it into my computer at work and the lights are on! Gonna try testing it again when I get home. Awesome, thanks for the tip! As obvious as that is, I never would have thought of it haha

 

UPDATE: Somehow we're back up and running! It just seems that it only likes certain battery packs I have. Oh well, not the end of the world. Trooping with it for the first time tonight, so we'll see how it goes! Thanks for the help!

[TKTalkie v3 Released!]

Hey all... wondering if anyone can help me troubleshoot - my TK Talkie was working fine but the last time I went to plug it in, it wouldn't fire up at all. I used a new 5V battery pack and upon closer inspection, realized it listed a 3Amp max power output. I tried an older battery after that was forsure a 1Amp max after and it still wouldn't fire up. Could I have fried the Talkie from too much power? Is there anything I can do? Help! Thank you

[501st Trooper Status Requests (Include link to your 501st profile in your request!)]

ID-61490 requesting 501st Member access!

https://www.501st.com/members/displaymemberdetails.php?userID=26076

 

TK build is in progress!

[Accessories in gear to add to a standard TK]

HWT is probably your best bet, and what I'll be shooting for next. The backpack, giant blaster, and pauldron really make a visual impact and aren't crazy expensive to assemble. Plus, the general consensus I've heard is that pauldrons aren't appropriate for general wear outside of TDs and HWTs, so....

http://databank.501st.com/databank/Costuming:TK_hwt

 

Otherwise it might be cool to do a Space Pack, that would really stand out:

http://databank.501st.com/databank/Costuming:TK_anh_stunt (at the very bottom)

 

Or Anovos just released a bunch of new TK helmet one-off's from Battlefront and possibly TLJ or future R1 style movies. The Stormtrooper Commander is my current favorite. Could be a cool jumping off point to mod your armor into something really unique for cons:

https://www.anovos.com/collections/star-wars/products/star-wars-stormtrooper-commander-helmet-accessory

 

Otherwise, fun accessories I've seen include:

Binders (handcuffs)

Comlinks

Scanning datapads

Electrobinoculars