Kaar121

Bummer! I was looking forward to that one.

Will do good sir. Are you going to the air show at the end of the month?

* * * * * * * * * * * * HOLONET MESSAGE * * * * * * * * * * * * : : : : : : : PRIORITY ONE : : : : : : : Holonet Message: 20160607-1 Cadet Kaar, Fabrication of your stormtrooper armor Model: AP mk 2 is complete. The armor has been shipped to an Imperial distribution depot in your sector and will be delivered to your garrison location by Imperial courier on 2016/06/10 IST. Mark, Chief Imperial Quartermaster Imperial Armory, Imperial City Coruscant

Looks great Angie.

Well, the hobby shop was a bust. They didn't have the connectors that they had online. The ones that they did have were way too big. *sigh*. Good news is that I got the paint and brushes needed for later. I guess I will need to go to plan "I" (internet order) and put the cooling system on hold until later. Maybe I will just solder the whole thing together and say heck with it.

* * * * * * * * * * * * HOLONET TRANSMITION * * * * * * * * * * * * Holonet Message: 20160603-1 Cadet Kaar Fabrication of your Blastech E-11 Blaster Carbine is complete and is currently in transit by Imperial courier to your garrison. Brett, Master weapons smith Imperial Armory, Imperial City Coruscant

Okay. So, for the electronics. I have the ICOMM & Aker system. The Aker speaker (bottom left) is the PA speaker. This is the recommended model for the ICOMM. There is a bigger one but I find this to be plenty loud. Next to it is the ICOMM. This produces the skicht static/squelch break to your voice. It doesn't do much for voice modulation but I like the "push to talk" (PTT) function. This way I can talk person to person and not have it broadcast to the whole room that "I've gotts ta pee". The Aker for those who don't know. By it's self is just a VOX speaker amplifier. Meaning, all you have to do is speak and your voice comes out of the speaker. VOX means the microphone is on all the time. Anywho. Across the top are the headset microphone, connection cable and the PTT button cable. The PTT cable goes down my arm to my hand where I just squeeze the button and the microphone turns on (keys in). And lastly a MP3 player for music or sound FX. I will be using a smaller cheaper one then the one shown. Hopefully this week I will be able to get over to the hobby shop and pick up some parts for my cooling system. I need a project box about 2 to 3 square inches, two switches and some wiring. There is also a computer shop here that may have fans that I can pick up. Sorry this is a crude drawing. This is what I have planned so far on the fan rig. As I get the parts and assemble the bucket I will be able to better refine the set up.

Hey Angie. I thought you might like to see this.

Looking good.

Hi Angie. Welcome back. If you haven't seen this already. . .<br> <a data-ipb='nomediaparse' href='http://www.whitearmor.net/forum/topic/32111-fisd-e-11-blaster-reference/'>http://www.whitearmor.net/forum/topic/32111-fisd-e-11-blaster-reference/</a>

Glad to see you back at it.

One of the things I really love about movies (especially Star Wars) is the ingenuity and pioneering spirit when it comes to props, costumes and sets. And I would feel that I did not carry on that tradition if I did not try to be creative. So, a little preview of my helmet cooling system. I did not come up with this idea but I did cobble the parts together from things I had. Such as a laptop (dead and useless) and a spare cellphone charger. This fan I took off the CPU of the laptop is like a leaf blower. It's enough to make your hair move. I have one other from the laptop but it is integrated into an aluminum duct. I am not sure if I will use it with or without the ducting. I am planning on constructing a junction box with switches to toggle one or both fans. If I place them just right I shouldn't have any airflow problems. My bucket on the other hand may decide to take flight though.

So I met up with the Alpine Garrison last night at the library event. It was a spur of the moment decision on my way home from work to stop by and introduce myself. I had planed on 15 minutes but stayed for over two hours. I was blown away at how quickly I was excepted in by the group. Bofore I knew it I was helping them suit up and instucted on being a spotter. I was in awe to see costumes in real life. To look inside buckets. To stand and watch them talk about CRLs and mods to the costumes. I knew then that I had chosen wisely to become a part of this amazing organization. I want to say thank you to IT-42420, TD-99000, jason10012 and Kylo aka Matt. That was fun.

Looking good Jason. Maybe one day mine will come.<br> Thanks again for letting me hang out with you guys at the library. I had alot of fun. Next time I will be prepared to spot for you guys.

Thanks Dave. It's just my luck I get an armor carrier made by Time Lords.

I was worried that the armor would not fit in the job box. So I did a test fit. Someone said you could use these things as a dressing room. Now I believe them.

Einstein once said "Insanity is doing the same thing over and over again and expecting different results." I don't think Einstein had ever waited for tracking numbers. Ha,ha. Alright, we all love to see the pictures. Now that I figured out how to post them here they are. Behold! The Armor Carrier. This is the infamous Husky 50 gal. (37 in) mobile job box. I went back and forth between this and the 25 gal. (35 in). I obviously went for the bigger for a few reasons. One, it fits the entire suit, bucket and then some. Two, built in lock. And Three, it was either take this or risk clocking the clerk for being unhelpful. Not really, but yes really. Anywho. I want to paint it like most everyone but, I don't want to do the typical black & white. I was thinking Sage green, Navy blue or Dark grey with the black. What do you guys think?

Hey Preston. Thanks. I was reading Aaron's build at the time of the mishap. I hid the HG after that. Good luck on your build. Looks like it is coming along nicely.

Okay. I had to wait to get home. It is too hard to type this on my phone. Plus my boss was giving me strange looks. Thank you for the greetings I am glad to have you here and good luck to you Hugh. This is going to be fun. Now for the list . . . Armor - (AP) Authentic Props Boots - TK Boots Blastech E-11 - Quest Design Canada. Under suit - Tesla, Found on Amazon. They fit great and were cheep. They are on the thin side. Great for summer but I will get thicker ones for winter. Gloves - Rapon (NOMEX), Amazon. Look great. These are for regular trooping only. Neck seal - Handmade from pandatrooper's design. http://www.whitearmor.net/forum/topic/8402-howto-create-a-neckseal/ I was going to buy snaps online when I found out there is a Tandy Leather by my work. So I ransacked the place and came out with Line 20 snaps, setting tool and anvil. I chose to go with the smaller line 20 instead of the 24's because they were less expensive and since I am using nylon snap plates I didn't want to deal with the longer posts of the 24's. I also am going to double up on the snaps. So I think I will be okay. I have assembled the various tools needed although I can not find my ruler. Grrr! The other tools and materials I will obtain as I get to that part of the build. Is it wrong that I have trimming nightmares and I haven't even gotten to BBB day? - - - ARMOR PROGRESS CHART - - - Bucket - Paint, install lenses, install frown mesh, trim ears, install pads, install fan Neck seal - Complete Chest plate - Attach bridges, add strapping, install ICOMM Back plate - Awaiting strapping Ab plate - Complete Kidney plate - Complete Butt plate - Complete Belt - Complete TD / O2 canister - Complete Bells - Awaiting strapping Biceps - Awaiting fitting and strapping Forearm - Being fitted Hand plates - Complete Thighs - Awaiting fitting and strapping Shins - Awaiting fitting and strapping E-11 - Complete and weathered

"Cadet Jason Kaar reporting for training and armor assembly." Hello, and thank you for joining me on this build. I have never done anything of this magnitude before. So this should be interesting. Okay, so to catch everyone up I have been researching like mad since January and finally took the plunge on May 4th. It seamed appropriate. Anywho, I am really excited and can't wait to get started.

Let's get this thing started.

Okay . . . *knuckle crack* . . . here it goes.<br> Who are you? - Choosing a costume<br> Have it your way - Choosing an Armor smith<br> A few of my favorite things - Tools, Materials and soft parts<br> The Big Box Blues - What to do while you wait. And wait, and wait . . .<br> I'm not OCD! . . . You will be. You will, be.<br> Help! - Where to start on your armor.<br> Measure once. Measure twice. Measure again - Trimming armor<br> Butt, butt, butt - Gluing your armor together.<br> Beware the heat gun - Use the hot tub.<br> . . . or something like that.

These look great. You should illustrate a "Dear Newbie" book or something.

Aww . . . Their like little Star Wars kids. Any word on the BBB? Mark says mine will probably ship end of next week.

Mine isn't a nickname. It is derived from Specialist Jason Kaar. A star wars character I created a long time ago in a northern California apartment far away. Since then Kaar has become my star wars persona weather it be pen & paper RPG or video games.121(Bravo 121) was my badge number at one time and the number keeps popping up in one form or another. So it has become my number.