Krom1975

All I can say is wow. Are you going to be selling an e-11 kit when your done? Sent from my iPhone using Tapatalk

Hi, They are to small at the bottom. I read how to shim them to make them bigger. Was just hoping not to have to do it. I already enlarged one thigh. Just have to do one more coat of abs paste and sand. Then that one is done. I don't mind doing that on at least one set armor, because it's for a sandtrooper. The other set is a traditional tk and I would like it to be as clean as possible. this is the one I enlarged already. I can do it to all of them but would like to at least have to totally cleaned ones. Thanks for getting back to me so fast. Sent from my iPhone using Tapatalk

Hi guys, I messed up the thighs on my anovos tk kit. Was wondering if any one was selling parts of their kit or know of a place I can get some. Thanks Sent from my iPhone using Tapatalk

Hi Paul, is this how the sides are supposed to be. Nothing is guled down. Just wanted to make sure it was right before I did that. Also amazing job on your helmet. Thanks Sent from my iPhone using Tapatalk

This might seem like a dumb question, but could you go into more detail on how you soldered everything together. Thanks Sent from my iPhone using Tapatalk

Haha I definitely had to breath there. What I did was take 1/2" off the back and part way on the insides. Then tapered it to the front only removing the return edge. The back was hitting my butt, so I couldn't pull them up any further. Now the problem I have is I think they are to tight around the bottom to move them up any further. Hey you live you learn. Again thanks for all the help. I really appreciate it. I had no clue how they fit. At least I got the shins right. One more question. Should I size the shins with the boots on or off. Sent from my iPhone using Tapatalk

Sorry to bother you again. Heres a new picture. Now I have it #24 on right leg. Then #27 on the left. I also took off an 1 1/4 off the bottom of each shin. Should I take a little bit more off? Also I took your advice and trimmed the tops of my thighs. How do they look now? Again thank you so much for helping me out with all this. Sent from my iPhone using Tapatalk

Sorry it took me a bit, but here is a picture of the shins flipped.so now it's #25&28 on right #24&27 on left. Sent from my iPhone using Tapatalk

I didn't take anything off the tops of my thighs except 10mm off the high points. Just so I could bend a little more. With taking off the return edge on the top of the thighs will that affect centurion status. Thank you for the help. I'll post pictures this weekend with the shins flipped. With the shins I already took 3/4" off the bottom. Thanks again I kept looking at photos to see how everything laid in but it was really hard to tell. Sent from my iPhone using Tapatalk

Hi Ukswrath, First off thank you for doing this feed. It has helped me with my build. I wanted your opinion on what to do with my shins. I'm only 5'6" and I don't have a lot of knee showing between the thigh and shins. I also wanted to make sure I have the right shins put together. I have #24 and #27 on left. #25 and #28 on right. Sent from my iPhone using Tapatalk

Thanks, after looking at I was thinking the same thing. Sent from my iPhone using Tapatalk

Thanks. I just looked at a lot of different posts on here. Research research Sent from my iPhone using Tapatalk

I didn't notice that. Good looking out. I'll resize them with the correct overlap. Sent from my iPhone using Tapatalk

Hi everyone, I was hoping to get some feed back about how my armor is fitting me. Any help would be greatly appreciated. ----------- By the way this is an Anovos build. In this picture the shin arrangements are #24 and #27 on the right. Then #25 and #28 on the left. I just want to make sure they are right before I put them all together. Thanks in advance Sent from my iPhone using Tapatalk

Thanks TK. How much movement should I have in the bend. Sent from my iPhone using Tapatalk

I started working on my thoughts this week. I'm wondering if I need to take more off the tops of my thighs for better movement. As they are now when I bend my leg up they dig into my hips. If I do have to take more off. Do I need to put a return edge back on? Here are some photos -----------

I had a quick question for you. I did notice that my butt plate flares out. Would it still be EIB and Centurion acceptable it I added another set of snap plate closer to the edges or should I heat brand them in more.

Thanks a lot. I research a lot before I do a section to find out the best way to do it.

I finally got around to taking some pictures of my kit build so far. Here is the torso so far. Still have to glue the strap from abdomen to the kidney plate.

Hi,<br> I want to build a my armor as a sand trooper. I got the canvas shoulder straps from trooperbay. Does anyone have pictures of how they are attached to the chest and back plate.<br><br> Thanks