Kit Gutierrez

As I am still on stormtrooper heaven, I cannot take all the credit for being approved, CRL model, having my kit trooped even before Force Friday 2 and being 1st in the world just wanna thank the team that made this possible, Jimmiroquai, my CO, GML, GWL, my Laser Ax maker, the detachment leader @Daetrin & the LMO. Also, thanks to everyone here who followed & supported my build.. this success is for all the budding executioners in legion advanced congrats on everyone's approval!!!

Here's my Laser Ax Ver. 2 : It's a big leap from my ver. 1 (which was made from very limited reference photos way way before Force Friday 2): I'm so happy ver.2 folds completely! haha! I'll compile the build pics and post it here soon also

Here's my Laser Ax Ver. 2 : It's a big leap from my ver. 1 (which was made from very limited reference photos way way before Force Friday 2): I'm so happy it folds completely! haha!

Here's my Laser Ax Ver. 2 : It's a big leap from my ver. 1 (which was made from very limited reference photos way way before Force Friday 2): Let me know if you need a photoshopped version of this

Hey man! TK 44840 here from the Philippine Garrison.. and i have an executioner for approval.. I have build threads here and photos of the said trooper which might help you: https://www.whitearmor.net/forum/topic/42875-tlj-executioner-stormtrooper-build-jimmiroquai-set/?tab=comments#comment-574280 https://www.whitearmor.net/forum/topic/42806-executioner-stormtrooper-build-jimmiroquai-set/?tab=comments#comment-573167 Alternatively, you can check my builds at: Facebook - Stormtrooper On Weekends Instagram - @StormtrooperOnWeeekends / @kit_gutierrez Sent from my iPhone using Tapatalk

Wooohoooo!!! Cant wait to see other executioners in the legion Sent from my iPhone using Tapatalk

Woohoooo!!! Cant wait to see other executioners in the Legion Sent from my iPhone using Tapatalk

Hi Paul! Reviewed the CRL draft again on the databank link, not sure if everyone agrees with me, but i believe the first order cogs on the shoulder bells should be light gray instead of silver [emoji4] Sent from my iPhone using Tapatalk

Goodluck sir on your build! glad to be of help to those who share in the desire to build this badass FOTK variant.. cant wait to see your build as i dont want to flood the forums with my step by step journey into this build, my whole build is compiled in an album at Stormtrooper On Weekends on facebook Sent from my iPhone using Tapatalk

I concur sir with this being a level 2 thing Sent from my iPhone using Tapatalk

Let me correct my term.. its a “slight difference” like all armors have slight differences... and if you ask me, it might not be an intended difference by disney/lucas Anyway, i respect your stand glen as i have my stand too. All for discussion & approval & finalization. Sent from my iPhone using Tapatalk

Just to add, Anovos has differences with Jimmiroquai which has differences with other kits... but all are approvable. These slight changes arent called out anymore.. yet these different kits are all approvable & still considered screen accurate once approved Sent from my iPhone using Tapatalk

I know Glen and thats why im here, to openly discuss with everyone my take on the TFA & TLJ troopers. “Obvious” is a relative term. “Obvious” changes for me which need parts updating are: -helmet -back/yoke -bells -biceps -TD For me, with very slight changes, the cod piece is not part of the “obvious” changes Sent from my iPhone using Tapatalk

Hi Glen! Thanks for your input. I acknowledge that i might have missed some items before i joined as ive mentioned, im really new to the forums (and imgur.. haha) But being added here, as the first to complete the armor and submit the CRL draft, trooped it several times already, checked by local officers, green lit by my armor maker, Jim.. makes me qualified to share my input too about this matter. And im still standing by my points But of course everything’s still for finalizing hence this thread. Just shared my 2 cents which i think, are valid points Thanks! Sent from my iPhone using Tapatalk

Regarding the cod piece: If you ask me, i dont think there’s a need to change the CRL entry or picture of the codpiece with this very slight change in detail.. 1) the FOTK codpiece entry doesn’t specify specifics with regards to shape “ Codpiece For 501st approval: The codpeice sits below the abdomen and under the belt. “ 2) if we count slight changes in shape, how do we account for slight changes in shapes in all parts from one maker to another.. some makers would actually have parts that are curvier or straighter or shorter or longer than other makers 3) some toys (if not all) retained the cod piece shape, in my opinion, because Disney or Lucas didnt exactly specify that theres a change in cod piece shape for the this specific character/toy design 4) if you ask me, its a bit impractical for troopers to have an extra cod piece shipped with this very slight change If there’s anything we need to push, i think its the seam/overlap in the biceps and thighs. But even that, in my opinion, could not be required for basic approval Thanks! Goodmorning everyone from Manila Sent from my iPhone using Tapatalk

Thanks Paul!! [emoji1360] Sent from my iPhone using Tapatalk

Hi! As mentioned, as we have finished our build as early as 1 week before Force Friday, and we have been included to this thread just yesterday, hence our submission of photoshopped individual parts just now: Model TK44840 (Christopher "Kit" Gutierrez), Photos by Kristina Gutierrez: Helmet (4 angles): Back/Yoke: Thermal Detonator: Shoulder Gaskets: Shoulder Bells: Biceps: Thanks!

As we have finished our build as early as 1 week before Force Friday, we have been included to this thread just now. Hence, we would like to express that we would be submitting all the needed photos too but hopefully you can give us time to photoshop the needed parts But here's our model photo front/back: Model TK44840 (Christopher "Kit" Gutierrez), Photos by Kristina Gutierrez original size: https://imgur.com/NYyWt1r We'll be submitting the following photos asap: -helmet -back/yoke -shoulder bells -biceps -thermal detonator -laser ax Thanks!

Thanks man!!! Lucky that @jimmiroquai's TLJ build is spot on we worked hard to bring his set to life in time before Force Friday II eve

Hi @MStalkid! the original FOTK CRL states: Biceps For 501st approval: -Biceps have only one seam on the side that faces forward. The rest of the bicep must be seamless. -A clip greeblie is present low and across the seam -Two black ovals are present on the outside facing side of the bicep This is my entry in my original submission: Biceps
 For 501st approval: · Biceps has one seam on the side that faces forward. A clip greeblie is present low and across the seam
.* · There is a seam or an overlap at the inside facing side of the bicep · Two black ovals are present on the outside facing side of the bicep *I just highlighted the whole entry "Biiceps has one seam on the side that faces forward. A clip greeblie is present low and across the seam
." green because i changed the first sentence. But yes you are right, the greeblie across the seam is standard already for FOTK. everything that i have highlighted in green in my CRL draft are all entry changes specifically to the exceutioner.

Hi @JAFO! yes i believe my original entry in my CRL draft stated that the First Order cog is light gray. I agree with you! my mistake in my original entry is i pegged the cog at 3". This was before i did the standee-photoshop analysis below: "To anyone building the Executioner from Ep8, here's what i did to determine the actual size of the First Order emblem on the shoulder bells: So i remembered i had a photo with the executioner standee during Force Friday. I did a perspective crop from top of bucket to heel. Resized image to 72" or 6ft (the official average height of stormtroopers... then measured the emblem. Its 2.5". But, I think, depending on your set, you could just go for the right proportion of the logo to your set's shoulder bells as compared to the proportion shown in official images. I think this could be a range of 2.25 to 2.75.. or even 3. The 2.5" is just the size based on the official standee made to be 6'." Jimmiroquai's shoulder bells are a bit wide so i honestly think 2.5" is a bit small for his set. The bells on the standee, i think, are narrower than Jim's.

Same here Glenn. If im not mistaken, our GML, Luis Arambulo, submitted Sept. 5, 2017. Thanks for your additional input!

Hi! I'm Kit Gutierrez, TK44840 of the Philippine Garrison, author of the CRL draft above (although i think this was already revised based on fellow troopers' inputs) and owner of the Executioner armor (where the CRL i drafted was based on) Just wanna thank you for adding us in this thread. Let us know, me and the Philippine Garrison, on how else we can help in finalizing this CRL.

let me know if i can help out in photoshopping/cropping my individual parts

Just sharing with everyone my Executioner CRL application photos Completed and first trooped at AsiaPopComiCon Philippines on Aug. 26, 2017 then trooped again for eve of Force Friday II last Aug, 31, 2017 #ETK #TKE #FOE #FOJ #TE #TK44840 #501stLegionPhilippineGarrison To anyone building this trooper, you can follow my build at the FISD and 501st forums, and at Stormtrooper On Weekends on FB and on IG Hi @Daetrin... here are my approval style photos for CRL application will be sending you a separate email on individual changed parts and trooping photos on said dates above..thanks!