Dax Corrin

I did figure it out, that particular picture in the assembly manual had me fooled. I then successfully glued my thumb to the folding stock assembly. It peeled a nice chunk off. I have the third coat of primer on but not yet sanded.

First coat of high build primer, then sanded, and a second heavier coat not yet sanded on the barrel. I'm giving it a full 24 hours to cure the thick coat before sanding it. Probably need at least 1 or 2 more to fill the seams between pieces in the vented portion. The magazine kind of put together. Still trying to figure out how to assemble the folding stock parts

I picked up a BlasterMaster kit from someone who didn't have the enthusiasm to sand and finish out all the 3D print lines and I do, so I'm giving it a go. Love the LEDs, nice and bright, but the sound not so much. Researching Anthony's sound board, maybe able to integrate it with the Red and Blue LEDs I already have, for barrel lights and want "Stun" and "Kill" sounds. The rest of the fancy displays I don't need....yet... Package arrived last night, and I got the 3 main barrel pieces glued together and got the "bolt" action to function. It needs more sanding so it doesn't sound like 2 pieces or ridged plastic rubbing together (which of course it is) on both the sliding section of the bolt assembly and the inside of the barrel where it slides. 1st rough sanding of entire barrel assembly and a coat of high build primer to dry all day today then the real fun begins. No sanding of the vent holes yet either. It's going to be a hell of a ride. Pics to come.

I have one of those Disney blasters, I just took it apart and painted it. I added a piece of black tape between the existing plastic "light guide" that runs the length of the barrel as you aren't supposed to be able to see through that barrel through the holes. I had to take it apart again as the trigger switch was cheap and would go off on it's own randomly. Your work is great and need a link to those shapeways parts if possible, and the mini telescope you used.

Please enable 501st access. IG-12485 http://501st.com/members/displaymemberdetails.php?userID=16789