Jump to content

TK-7959

501st Stormtrooper[TK]
  • Posts

    36
  • Joined

  • Last visited

Everything posted by TK-7959

  1. Hoping you can find the right place, and continue the work. It looks very promising!
  2. Any progress on this build? I would love to see a finished one.
  3. Ok, thanks. Looking forward to the full resolution files. 200 MB should fit on any imageshack, flickr or place like that.
  4. Thank you! They were kind of low res though. No one uploaded them in "full" resolution?
  5. I mean the official group pictures from CVI. It is what I understood the thread was for? Haven found thoses anywhere.
  6. Where can I get hold of the group pictures (in full resuolution)? Want to see how we came out.
  7. I tried Dazautos suggestions a week or so ago, but still no reply. So no luck here.
  8. I have also tried to reach Doopydoos via e-mail for months, using both my private and work e-mail accounts, but no luck. Tried again now with the F.A.O CASEY-subject. The website says "if you need to contact DoopyDoo's please email Sales@doopydoos.com between 10am - 5pm Mon - Fri" Do they only recieve e-mail during business hours? That is wierd. I have tried both during business hours and at nights though.
  9. Thank you, It is so nice to see that all the hard work pays off. (Picture sent via PM!)
  10. ANH Hero Stormtrooper - requesting Legion Centurion status (Improved SDS-armour) 1: Your Name 3 Henrik Pilerud 2: Your 501st TK ID # TK-7959 3: Your FISD forum name: TK-7959 4: Your Garrison Nordic Garrison
  11. I'm redoing my Expert Infantryman request, with my newly approved ANH Hero. (Last time it was Stunt) The difference is helmet and belt rivets, since my last request. Let me know if more pictures are needed. (501st profile not uppdated because I was approved just yesterday by GML Lisa Michaelsen of Nordic Garrison.)
  12. Yes they do, a strip of green plastic film as in the original. However I have other, sturdier, (gray) lenses installed, for comfort and for better picture in the helmed cam. Yes, revoke away. We can do this dance again when I finish my hero-plans.
  13. The legs have a strip on the front, and overlap at the back. The arms overlap on all sides. I don know if that is a problem. The lenses are grey, as I beleive was allowed when I joined. But I see in the CRL now, it is only allowed with green? Too hard for basic approval in my point of view. A small detail and grey is som much better for comfort. I that fails me, then I will wait with EIB/Centurion application until a later time.
  14. Requesting 501st status. http://www.501st.com/members/displaymemberdetails.php?userID=13699
  15. Quoting the CRL: "Back plate shall have no, or minimal overlap of the kidney plate." (Centurion) And I believe there is no overlap when I walk around normaly. However, a slight overlap a certain positions would be allowed, as it says "minimal overlap" in the CRL. Correct me if I am wrong. Concerning the buttplate. Is is no excess, but I see what you mean from the picture. That, however, is just a trick of light and reflections, in reality it is no excess. I will add a picture to prove it in the centurion application.
  16. Awesome! Do I have to reapply for Centurion or was that approved as well? Concerning my excess butt(plate), perhaps you can show me what you mean the next time we troop? I am not sure what you mean.
  17. ANH Hero Stormtrooper - requesting Expert Infantryman status (Improved SDS-armour) I could not change the topic but this is for HERO now, not STUNT. 1: Your Name 3 Henrik Pilerud 2: Your 501st TK ID # TK-7959 3: Your FISD forum name: TK-7959 4: Your Garrison Nordic Garrison
  18. This is wery interesting. Keep posting here with uppdates on how the integration of them into the blaster works out, sounds (and looks)!
  19. Thank you! I chose plastic because of the weight when trooping, and it was easier to find.
  20. I decided to make screen accurate looking binders in the style used in ANH in Chewbacca (and most likely on Leia too). Comparing the referens pictures I got from ANH blu-ray and comparing the size with the stormtrooper armor a came up with a sixe of about 10 cm / 4" in diameter. That is HUGE on a regular person. So i decided for about 7,5 cm / 3". The original is most likely made of brass pipe, which would be rather heavy and not so easy to find, so I chose plastic plumbing pipe, which unfortunately had too thin plastic. (About 2 mm.) So I glued two layers together. (This is this constuctions biggest weakness. Because it tends to crack and sepperate under stress. And getting pipe with plastic about 3-4 mm thick would be much better. However, this was not anywhere too be found in Sweden.) Also, I accidentally mirrord the constuction. Not a big problem, but still annoying. The blueprint shown here is however correct! Sanding it, spraying first with a primer, that a gold spray color. Adding some weathering with a brush and some dark greyish brown color. And then a glossy coating. The actual prop has no way of staying "locked", exept putting a pin in small holes. So I made my own descreet construction with a small pin sticking out, and a hole. I have more pictures from the build. I can e-mail them to anyone who is intrerested, just PM me. (Also, i think this should be in the CRL for Stormtroopers and approppriate officers, as these are being used by those in ANH.) Now I am off to put them on my Rebel Legion ANH Leia (senatorial gown) girlfriend!
  21. Any new ideas on getting sound (and light) into the new blaster?
  22. I have tried to reach Doopydoos a couple of times, using two diferent mail adresses/internet suppliers, and still no answer after several weeks... :/
  23. Any updates on this? I Have had the exakt same plan. SDS E11+hasbro Boba Fett rifle. So i'm quite interested.
×
×
  • Create New...