Imperial Cog Wall or Tabletop Decoration

[gmrhodes13[Staff]]

File Name: Imperial Cog Wall or Tabletop Decoration
Designer: mgranger114
Last Update: 26/07/2025
File-URL: https://www.printables.com/model/1362630-star-wars-imperial-cog-wall-or-tabletop-decoration
Description:

I made two versions of the Imperial Cog to choose from. Both of them are 100mm circles. They have a cutout on the back to hang on a nail or screw. There's also a foot that connects to sit on a desk or shelf.

imperial cog desk wall extruded.stl--There will be a color change after the background prints. The cog symbol will be the second color. If you were recreating the picture, it would be a black background, then white to finish it off.
Change at 15.2mm when the background finishes.
Cog symbol will be this second color.
 
imperial cog desk wall recessed.stl
Start the print with the color that you want recessed. The recessed areas will be that color (white in the recessed pictures). 
Make the change at 12.2mm where the solid fill of the recessed areas ends. Then it starts the outlines of the rest of the cog (black in the recessed pictures).
The extruded ones were done on an old printer that I just use for test prints, that's why the background layer isn't very smooth. I also changed the filament one layer too soon, so I had to use a black Sharpie to color it. That's what the extraneous black marks are. 

I also made a Rebel Symbol 4-½" Desk or Wall Decoration

 

Images: