quick0817 Posted December 28, 2016 Report Posted December 28, 2016 Ok I am a smaller guy with smaller shins and calves. If you did AP and have some pointers on what to do let me know. The sides of the plate have no contact surface to the legs. They angle outward. If you can share what you guys did for yours please do! Quote
zv288bot[TK] Posted December 28, 2016 Report Posted December 28, 2016 Hello, posting some pictures will definitely help speed up getting an answer to your question.<br><br> Thanks! Quote
Pretzel Posted December 28, 2016 Report Posted December 28, 2016 (edited) The sniper plate for AP can be a little weird to line up. Use your best judgment when lining it up. It won't look 100% lined up. That's okay. Just use some clamps when applying it to the shin! (Pictured above).But post your situation so we can understand the problem better.Good Luck! Edited December 28, 2016 by Pretzel Quote
Tolo[TK] Posted December 28, 2016 Report Posted December 28, 2016 My way of doing it. Start by the middle, make sure it's dry (I use ABS cement). That glue the sides one by one. Sent from my iPhone using Tapatalk Quote
quick0817 Posted December 28, 2016 Author Report Posted December 28, 2016 Ok here are the angles. I have it held I place with Velcro right now Sent from my iPhone using Tapatalk Quote
Haso[TK] Posted December 29, 2016 Report Posted December 29, 2016 It is a tricky job with these. A few of us on FISD did our AP builds at the same time this year and found it not so easy. But basically as mentioned earlier, glue the front first, then i glued inside edge, then the outside edge. Use clamps to hold in place. Sent from my SM-J100Y using Tapatalk 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.