firstceb Posted December 2, 2015 Report Posted December 2, 2015 (edited) Big fan of BMGs! So, while I wait for armor... Going to test galvanized steel for the exterior for weathering. Edited March 19, 2016 by firstceb 2 Quote
gmrhodes13[Staff] Posted December 2, 2015 Report Posted December 2, 2015 Looks like a good start, looking forward to the progress Quote
firstceb Posted March 19, 2016 Author Report Posted March 19, 2016 Didn't expect armor till later this year and turned my eyes toward other projects. Till Rob at RT-Mod threw down the gauntlet with a 'Sandy' quality kit. It arrives next week. One of the projects was to start framing the back wall of the basement, which was done in two 9' x 13' sections. Still have the other side of the house to do... With a little motivation... I figured I'd get working on the BFG again. So, as a fan of the BFG, bigger is always better. I was doing some sanding on the stock. Cut the fitting end of the 3" pipe, +6" from the taper. Some of that will come off in the finishing process. I may do this completely custom for a Mando I am planning, we'll see. Current overall length from base of shroud to barrel tip 35"! Need to go to Lowes tomorrow for some weed'n'feed, so I'll be picking up some supplies. For the gun and my upcoming armor build! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.