Ossus501ch Posted April 10, 2013 Report Share Posted April 10, 2013 (edited) I'm new here. Do not remember when I registered. Some months ago. Michael my name. Not many postings of me. Up for a TD. Actually making a blaster from resin kit. It's maybe intresting or helpful for someone. I had it bit hard when I got the kit. Seemed more as I thought. No manual like I am used to in scalemodeling. And had to find out some things (counter, rig, bracket) I hope I find the correct words, as english is not my main language. The album is also on facebook, so far people like it or gave me hints. Helpthreads from here that I looked at, had good use from: - DM101http://www.whitearmor.net/forum/topic/19872-dm101-doopys-e11-blaster-build/page-2 - Billhag http://www.whitearmor.net/forum/topic/4697-howto-make-a-metal-scope-rail-counter-bracket/ Materials: - Kit (ebay) - Tamya Putty Basic Type for filling / fixing - M6 Drills - Alu rig 2mm thick, 2cm wide - 2 alu tubes for inside - A shock spring (or wire) - Composit glue - Big and small rasps - A plate (synthetic I think) 1mm thick for Inserts (folding stock) - A plate like above 3mm thick (used for counter modification) - Nails that I used for bolting I think every easy to lose or break-off part to make it hold together better - A plexiglass plate 2mm thick for counter modification - Rubberbands - Handsaw - A little driller I use normally for scalemodeling (1/72 scale), for small holes (bolting) - Bosch drilling machine - Bit set - Forstner milling bit (10mm) - Ruler - A headphone extension that I haven't used yet (cable counter to mag) - Pictures - A lux Bench-Vice - A good cutting knife - Pincer(s) - Soapwater for pre-washing parts Edited April 10, 2013 by Ossus501ch Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Start - foldingstock fixing Bench-Vice Inserts 1mm to fit the proportions Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 After covering with putty, polished Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Then I went on the countermodification, making it flat Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Measuring from pics from screen to the counterscale, 2 1mm plates Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 plexiglass After first try I made the hole for the glass on both plates making it look like this. For the - what I call it - resetter I put a piece in the mid the resetter is from 3mm thick plate, 1cm width, so 4cm space between it here it is put on for test Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Here it's bolted. It took me 4 pieces to make as I drilled by hand. Bolt 1mm thick Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 If I should lose it: Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Rig and inside tubes with shockspring, made by a verygood friend Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 (edited) Drill. I think it goes into the inside tubes for hold Edited April 10, 2013 by Ossus501ch Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 second drill, lager covered with putty Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 2 M6's Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Fitting the stock to get better on the barrel Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Another bolted part Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Now kinda looks like something already. Counterbracket not made yet. Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 There i started with a small hole drilled by hand, rasped out and used also putty to make it finer Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Bolted, even here. Take care. maybe better flat them.. there can be blood. Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 That hole very hard Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Mounting the bolted folding stock I used thre bolts. 1 at about the first rubberband and 2 sideways (not in a row) beforte the part starts where the holes are milled (or not) Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Endcap inserts (alu), 2mm thick I think Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Milled with forstner bit, the little holes will be covered with putty Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Quote Link to comment Share on other sites More sharing options...
Ossus501ch Posted April 10, 2013 Author Report Share Posted April 10, 2013 Counterbracket, meanwhile fixed with rasping. Ive cut that thing out by handsaw (heavy). For the tutorial I saw for that (see opoening thread) I am very thankful. And that's where I am Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.