Doopy doos t-track in the wrong place?

[gazmosis[501st]]

I would like to start by saying I am sorry for not having pictures. I am sure I can word this so that it makes sense to everyone and an answer can be found.

I am helping a future TK with his set-up. He showed me his Doopy doos kit which I had never seen before in person. The first thing that leapt out at me was the top center t-track covered all the top vent holes. I always thought that the top center most vent hole was left open for the scope rail to tuck into. I have seen all types of blasters...t-track AND scope rail in the same vent hole, all vent holes covered and the track screwed to the body. What is correct and do we need to creatively alter the Doopy Doos kit to be accurate?

[TK bondservnt[501st]]

thats part of the problem with the mk2 doopy do.

 

he filled the top last hole where it should be open for the sight rail.========

 

the one on the bottom is right.

 

the top one is a my position for a sight rail that's in the "same location"

 

the bottom one shows the correct position with a real scope and hengstler.

 

the top one is pvc and resin and the bottom one is full resin with real scope and hengstler.

Edited August 1, 2022 by gmrhodes13
link removed no longer working