burnjp5 Posted June 9, 2011 Report Posted June 9, 2011 Hey everyone, I'm playing around with modding my hasbro and thought I'd share the work so far. Bear in mind its the first time I've ever tried something like this, in addition to the first time I've been trusted to use power tools by myself . Obviously all the parts I've worked on need to be sanded and smoothed over, I also just realized its short one vent hole towards the front. Any other advice as always is thouroughly appreciated team! Quote
Marv Posted June 9, 2011 Report Posted June 9, 2011 The line up of the holes looks a little odd to me, but then I've never modified one of these. Vern put a lovely template of the layout in this Topic to see what I mean. Quote
Jorran Posted June 9, 2011 Report Posted June 9, 2011 The new row of holes should line up with the gaps between the existing holes above them, not directly below the existing holes. The new holes look like they need to be a bit bigger as well. Also, and this is hard to see in the picture, but it looks like the base of the t-track is still there where you drilled the new holes. That should be sanded down all the way to the blaster barrel. Quote
burnjp5 Posted June 9, 2011 Author Report Posted June 9, 2011 alright that is all very helpful! Thanks guys Quote
irocink33[TK] Posted June 30, 2011 Report Posted June 30, 2011 That helps me too. I asked this question in my build thread and got nothing. Turned out all I needed to do was go a few more threads doen for the answer. I must look up this vern now. Thanks again! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.