Greg S

Yah there was a lot of seepage. I did just that thanks. Also if you didn't know WD40 helps with cleaning off E6000 in other areas that get the glue on it. Like from your fingers. You have to be careful not to get on the cover strip edges as it may soften the glue. WD40 will not harm abs.

Thanks.

Cut and glued on the 20mm outer cover strips. When dry I will do a final fit for the rear. I left some extra to trim about a half inch. Then do the cover strips.

Cut and glued in the inside cover strips for the thighs.

Thigh time. Top return edges removed and taped the halves together. Next is to size the rear to my legs. Then install the inside cover strips.

Oh yah thanks. Not going to remove the clamps for 48 hrs. I have plenty to do.

Glued the Sniper plate on. Going to leave the clamps on for a day or two so the E6000 sets and cures really good. In the mean time working on the thighs.

How is this? When I compressed the sniper knee plate to the knee. Following the the top of the knee i just need to trim it just a little bit.

Sniper Knee Question? Before I glue the sniper knee in place how does this position look? I know it will tighten up when clamped. Do I need to trim any?

Thanks Just taking my time.

Got the top cover strips glued on the shins.

Shins are trimmed and the front two halves are glued together with the inside cover strip. I did trim the backs but left some extra material for final fitting before I put on the rear cover strip. While the shins are drying going to continue with the helmet and start the Thighs.

Awesome I will check that out. Also I will put in the lens Mounts - Posts before I put the 2 half together. Also started sizing and trimming the shins while glue is drying on the forearms. Had to redo one of the forearms didn't get enough E6000 on the cover strips. There was gaps. Biceps are pretty much done just need some slight cleanup.

Thanks Joseph. Awesome I will check that out for the ears. Also will put in the lens before I put the 2 half together.

Thanks Glen.

Thanks Tony.

Here we go. I cleaned up the Grey edges on the teeth and rounded the black on the top of the vocoder humps.

Yup thanks on it.

Thanks.. Noted I will remove the grey that is on the gum areas and round off the tops of the vocoder.

Just got the Imgur. Easy so far.

Oh wow just got excited about the Imgur thing.

Ok trying this Imgur thing. Worked on the helmet while the glue is drying on the forearms and biceps. Cut out the frown sections. Painted it Grey and paint the Vcoder black.

Thanks that is good to know about the TD. I am following AJ's build for reference. I will have to get on the Imgur app for my phone.

Thanks as Joseph said as well. I will give them a try. I not the best photo computer guy. All my pics are taken from a I Phone 10. Been having to resize them to 1080 on my Mac. I have a bunch of build photos I want to share. I will check out imgur and Flickr tonight.

Thanks. I am using the Snapseed photo editing app for cropping etc. I will have to give imagur a try.