MightyAtom

Hey folks, Just letting all and sundry know that I've had my forum handle changed from 'markgambino' (so formal!) to MightyAtom - a nickname from a long time ago in a galaxy far, far away.

Thanks for the feedback everyone! Sent from my Pixel 5 using Tapatalk

Hey team! I've had to resubmit some photos for my GML, but in the meantime I'm looking at L3 requirements for the rivets along the Ab and Kidney plates - I should have checked before assembly because the existing holes may be out. I want to double-check the details here before I start planning anything. So, this is 20mm from the top and 10mm from the edge? The measurements I currently have on my AP kit are 13mm from the top and 13mm from the edge. It looks fine, but if L3 literally requirements measurements... well, like I said, just double-checking.

Looks awesome, mate! Well done! Sent from my Imperial Communicator

Thanks mate! I have a few more small mods to make this week as well. Stand by for pics. Sent from my Imperial Communicator

Thanks! Short of tracking down a radar assembly from mid last century, it's the best I could do! Sent from my Imperial Communicator

Hey Dan, per your advice I did some research on power cylinders while awaiting my GML outcome. I decided a cheap option would be to make my own! I printed out some photos and went to a local electronics store to assemble anything that could resemble a raw component I could then shape and paint. I'm pretty stoked with the results - thanks for your help! Raw components Testing glue on the glue sticks - metal plate from scrap metal Painting Assembling the capacitors Soldering resistors Painting and assembly of cylinders Assembly and painting complete The outcome!

Thank you! As always, you're a wealth of knowledge! I'll leave it for now and make a call once I start moving through EIB and Centurion applications. Thanks again. Sent from my Imperial Communicator

I've submitted my GML! While I wait for a reply, I thought I'd take a look at L2/3 requirements. I have a feeling that the pre-drilled holes in the ammo pack are not to spec and I'm mentally preparing to dismantle the piece, fill holes, sand, smooth, drill, glue, etc. The holes are currently ~14mm from the top and end edges - will this meet L2/3, or what should the measurement be?

Hey Dan, I've gone over the E-11 specs doc here on FISD and have take your suggestions for fixing the T-rail and scope, and removed the coils. I made a new scope rail out of some scrap metal and it looks great! I'll look at some replacement power cylinders next. Thanks for your advice.

Thanks, Andrew!

Thanks, Dan!

Thanks, Mario! I'll look at a fix for the AB plate - either some padding to prevent it overlapping (and give me room to "grow") or trim the rhs to reduce the overlap. Thanks again!

Thank you, Joseph! I have debated those corners. I seem to have long arms and wanted as much 'real estate' on my forearms as I could get, but I will take your advice and look at rounding off the edges. Thanks!

Great, thanks for the feedback, Glen! Those pesky drop boxes snagged when I was running back and forth after hitting the timer shutter on my camera. I do have a little length to play with if I need to lengthen them, so I'll keep an eye on them. Belt or posture - either way, I'll work on it!

ANH TK Stunt Name: Mark Gambino Future Garrison: Nightfall Garrison Armour Maker: AP Helmet Maker: AP Cloth Belt Maker: Imperial Issue Neck Seal Maker: Darman's Props Boot Maker: Imperial Boots Holster: AP Hand plates: Joseph's Thanks in advance for your feedback!

This is excellent! SO happy I'm finishing up my first TK now. With luck I'll get my applications sorted soon. Sent from my Imperial Communicator

Thank you! Sent from my Imperial Communicator

Thanks very much! I'm looking forward to joining the ranks! Sent from my Imperial Communicator

Thank you! Yes, you've picked up a good issue here - adjusting the thigh height (also mentioned by Tarok) will fix both the gaps and the drop boxes issue (they seem to have snagged on the thigh edges). Thank you again! Sent from my Imperial Communicator

Thank you! I appreciate the feedback. It's been an incredible learning journey for me and the entire Legion had been super helpful. Sent from my Imperial Communicator

Hey Dan, Many thanks for your feedback. I truly appreciate it. The Hovi mic tips are Ukswrath's speakers. I've taken another photo with the flash, here: Thanks for the bicep and belt details. I'll make some decisions once I'm looking at higher levels. As for that cover strip ont eh left thigh, yes, I contemplated the position for a while. Your suggestion would look good, so I'll add this to my list. Thanks again and I appreciate your time.

Thank you! What a journey. Yes, for sure. The thighs are suspended on Velcro straps, so I can loosen and lower them, no sweat. Sent from my Imperial Communicator

I think I'm nearing the end of my build now. If you have time, I'd love feedback on what I need to work on or change before I post in the pre-approval thread. Thanks in advance for your help and a mighty thanks to everyone who gave me advice along the way. What a ride! Note: I'm yet to make mobility cuts and after today's full fitting will shape the shoulder bridges a little more to get them lower at the back. I may also put some padding inside the AB plate so the kidney plate and AB plate stay aligned on the right side (the bottom seems to swing in a little when the belt is on). PS - I love the wonky sniper plate!

Ah, thanks. I've seen a number of power cylinder options around, but have been a little confused about the variety and models available. Swapping them out would be an easy job, so once on enlisted I'll add it to my list. Thanks! Sent from my Imperial Communicator