equuspolo

Thank you Richard. Much appreciated.

Thank you little brother. Well taller but younger brother. hahaha Thanks Sean

Thank you Dennis, appreciate it brother.

Mario thank you so much for all of the help and encouragement. Appreciate it bother.

I will supply the supplemental photo but I will not have time to put it on and take photos due to my work schedule. So I will make the adjustment and take a photo as a supplement even on the advanced centurion photos.

Hi Chemi, not a problem at all and thank you for letting me know. Let me just make a serious recommendation for you guys, as this is absolutely wrong. I have not only seen but also worn the actual TLJ suit and the cod pieces are all over the place in shape and size and many of them are the actual TFA cod pieces. That is all I can say about how I know that. I have seen this discussion go on and on and it is absolutely wrong discussion. While this is true for some of the pieces, it is absolutely false in many regards. I have a separate cod piece and it is not a difficult replacement. I just want to let you know that it is an Absolute error we are making in FISD on this issue. They did replace the TD and Some Forearms of course as well as the helmet. But the Torso with the attached cod is all over the place. They have wide ones, narrowed ones for movement, rubber ones. So it will be a very bad choice to make to try and enforce this on future candidates. For me it is not an issue at all and I can supply a supplemental photo. But I think we would hurt our recruits and advancement. Example is the forarms and how they work. Not one on here is accurate compared to the real ones. I understand what you guys are saying but I have long disagreed with this and knew it was coming up. again all I will say is that I have worn quite a few of these torsos and it is not standardized.

thank you Sean.

Back photo uploaded

Thank you brother

i thought about reducing them as well

hahahaha yes I did. I’ll have to upload when I get home

Andrew thank you brother. Appreciate it beyond words.

Richard. Thank you sir. Appreciate all of the support and encouragement

Mario as always, greatly appreciate it.

Andrew thank you for such an amazing compliment. Means a lot. I always try and do it in a way that it will help others.

Thank you. Appreciate it

I had no idea. Thank you for educating me on this.

Thank you again Richard. Appreciate it brother.

Mario thank you very much brother. Appreciate it. The other two will follow right after.

Hello everyone, I usually like to get right to my approvals, but work had kept me from it. All requested changes have been made for this centurion submission. I am also submitting this with both helmets. Fiberglass and Plastic Anovos Helmets. Name: Ardeshir Radpour Username: equuspolo TK-42128 Southern California Garrison Los Angeles Squadron Height = 5'10 Weight = 165 Armor Maker = KB Armor - Trimmed to fit like Anovos Helmet Maker = Anovos Plastic Helmet and Anovos Premium Fiberglass helmet Boot Maker = Imperial Boots Gloves = Endor Finders Belt = Trooperbay Belt Pouches = Trooperbay Pauldron = Trooperbay Neck Seal = Imperial Seamstress Holster Maker = Dan Sczudlik Gaskets = production made silicon rubber gaskets F-11 = Branfuhr Studios Resin Kit- Custom built by me with custom light system. SE-44C = 3DPrintMerchant Electronics = Wireless Microphone with Acker Amp Custom Parts = Chest yoke and Backplate welded together with ABS Slurry. Chest Pills and Chest cut out backed with Textured Fabric, TD slurry welded. Entire armor painted with Rustoleum 2x Glossy White. Belt, Cod, Butt Plate attached to armer with Anovos leather waist tassets EIB Approval TFA Anovos Plastic Helmet TFA Anovos Premium Fiberglass Helmet

Hello everyone. Been a little MIA due to work. Here is my TLJ Executioner submission. This is the same suit that is EIB approved already. That TFA is being submitted for Centurion. Name: Ardeshir Radpour Username: equuspolo TK-42128 Southern California Garrison Los Angeles Squadron Height = 5'10 Weight = 165 Armor Maker = KB Armor - Trimmed to fit like Anovos Helmet Maker = Anovos Plastic Helmet Boot Maker = Imperial Boots Gloves = Endor Finders Belt = Trooperbay Belt Pouches = Trooperbay Pauldron = Trooperbay Neck Seal = Imperial Seamstress Holster Maker = Dan Sczudlik Gaskets = production made silicon rubber gaskets F-11 = Branfuhr Studios Resin Kit- Custom built by me with custom light system. SE-44C = 3DPrintMerchant Electronics = Wireless Microphone with Acker Amp Custom Parts = Chest yoke and Backplate welded together with ABS Slurry. Chest Pills and Chest cut out backed with Textured Fabric, TD slurry welded. Entire armor painted with Rustoleum 2x Glossy White. Belt, Cod, Butt Plate attached to armer with Anovos leather waist tassets EIB Approval for SAME TFA Suit EIB Approval UPDATED TLJ COD PIECE Updated Gray Painted Rail Button

Thank you Richard. Appreciate it brother. What is Gold EIB?

Hello everyone. Been a little MIA due to work. Here is my TLJ submission. This is the same suit that is EIB approved already. That TFA is being submitted for Centurion, then this one and the Executioner as well. I am submitting with two of my helmets, Noseplate and clips have been converted on helmet. One Fiberglass helmet and One Plastic Helmet. Name: Ardeshir Radpour Username: equuspolo TK-42128 Southern California Garrison Los Angeles Squadron Height = 5'10 Weight = 165 Armor Maker = KB Armor - Trimmed to fit like Anovos Helmet Maker = Anovos Premium Fiberglass and Anovos Plastic Helmet Boot Maker = Imperial Boots Gloves = Endor Finders Belt = Trooperbay Belt Pouches = Trooperbay Pauldron = Trooperbay Neck Seal = Imperial Seamstress Holster Maker = Dan Sczudlik Gaskets = production made silicon rubber gaskets F-11 = Branfuhr Studios Resin Kit- Custom built by me with custom light system. SE-44C = 3DPrintMerchant Electronics = Wireless Microphone with Acker Amp Custom Parts = Chest yoke and Backplate welded together with ABS Slurry. Chest Pills and Chest cut out backed with Textured Fabric, TD slurry welded. Entire armor painted with Rustoleum 2x Glossy White. Belt, Cod, Butt Plate attached to armer with Anovos leather waist tassets EIB Approval for SAME TFA Suit TLJ Plastic Helmet TLJ Premium Fiberglass Helmet UPDATED TLJ COD PIECE Updated Gray Painted Rail Button

Congrats brother

Congratulations Richard and welcome aboard. Also, growing up is a scam and a lie, don't do it. Stay young forever.