Jump to content

TK2103

Member
  • Posts

    30
  • Joined

  • Last visited

Everything posted by TK2103

  1. I’ve had a lot of free time in my hands due to quarantine, so here’s my improved armor. Shoulders have been brought in, the thigh cover strip has been taken back, the “Han” snap has been moved to the other side even though you can’t see, the rivets have been moved to the other side, all were painted white, and the back armor was lowered closer to the kidney. I still have to get 3 rivets for the abdomen, get rivet covers for the belt, and I’m not quite happy with the way my thighs are sitting. Let me know what you think!
  2. No worries, thank you! Sent from my iPhone using Tapatalk
  3. Thank you!! Sent from my iPhone using Tapatalk
  4. Like a dremel? Sent from my iPhone using Tapatalk
  5. I don’t know what I was thinking, but half is e6000 and the other half is CA glue Sent from my iPhone using Tapatalk
  6. Sent from my iPhone using Tapatalk
  7. Thanks so much for taking the time to respond, I went a checked out the abs sludge tutorial which was really helpful. Any opinion in regards to taking back that cover strip away from the ridge? Sent from my iPhone using Tapatalk
  8. I know I am VERY late to the party, but may I add that those helmets may in fact be re purposed anovos helmets? It’s not too far fetched, as disney owns them. I own an Anovos TK kit, and the helmet looks identical to me Sent from my iPhone using Tapatalk
  9. Hello everyone! My name is Carter, I’m 16 and from Garrison Carida. I made this post over on the general page, but was told by CableGuy that I’d probably get better feedback over here. I’ve attached some photos of me and my armor below, which is an Anovos Kit, and I wanted some input on fixes I need to make. Apparently in my excitement I put the 3 rivets on my right side rather than my left, and the “Han” snap on the left rather than the right [emoji2359]. In addition to those, I also extended the from cover strip on my left thigh past the ridge at the bottom. So my question is how would I fill the holes from the rivets when transferring them to the left, and how would I repair the ridge on my left thigh, as the cover strip is super glued down and I’m worried I’ll ruin it. Any input would be appreciated. Thanks! Sent from my iPhone using Tapatalk
  10. Thanks for the quick response! In regards to moving the rivents to the opposite side of the kideny, do you reccoment I fill the existing holes with a filler of some sort, or add additional rivets to the other side? Also, is that for level one or two certification?
  11. Hi Everyone! My name is Carter, and Im located in the Garrison Carida region of Pennsylvania. Im currently 16 years old, meaning Im slightly too young to be a member of the Legion at the moment, but i wanted to upload pictures of my assembled costume to maybe get some tips or changes for my armor. I assembled an Anovos Original trilogy TK and its my pride and joy. Im currently assembling a shoretrooper Captain and Im almost done with a Sith Acolyte from SWTOR. I know its not perfect, but i think its a good starting point. I currently have rubies boots, which I know are not accurtae, and i need to touch up the paint on the COD piece, but any other information regarding its accuracy would be greatly appreciated! Thanks!
  12. Hey guys, I was wondering if anyone was aware of any files, templates, or vendors for the hip armor on shoretrooper grunts and captains? I know this should be on the pathfinders forum, but I do rememberseeing the templates on here at one point or another, just wondering if someone could point me in the right direction. Thanks!
  13. TK2103

    Mixing Armors

    thank you guys so much for all your help!
  14. TK2103

    Mixing Armors

    i actually want to buy the RWA creations legs, because i’m 6 foot and he sells extended shins. what does his armor look like?
  15. TK2103

    Mixing Armors

    Hey guys I have a quick question, and i hope i put it in the correct category. i currently own a set of ANOVOS ANH stunt armor. i put it together two years ago when i was 14 and i must say for my first kit, it looks pretty damn good. I am not satisfied with the way the legs look and i used superglue on them, and i am not able to take them apart. what would you guys recommend when it comes to replacements? ANOVOS offers only arms atm and i was wondering if it would be ok to order from ATA. would the colors match?
  16. Anovos, WTF (Walt’s Trooper Factory), and ATA are all good sources. You can but a kit or a completed prop. Hope this helps Sent from my iPhone using Tapatalk
  17. Thank you so much!! Where do I find their contacts? I can’t seem to find them Sent from my iPhone using Tapatalk
  18. How can I get ahold of Rocky at WTF? He hasn’t been responding and I’m wondering if he’s the right person to talk to. He’s the sales rep Sent from my iPhone using Tapatalk
  19. Anovos does make a Shadowtrooper kit. I’m extremely happy with my TK kit but I can’t wait another 12 months for a costume.... they always seem to be on backorder Sent from my iPhone using Tapatalk
  20. Wrong word lol. I don’t mean cheap as in 2 or 3 hundred . I’d like to stay under 800 for the kit itself. I bought an anovos kit for 450 and am looking for a decently priced shadow trooper kit
  21. Hey guys! I’m 15 and on a budget. Does anyone know where I can get the cheapest, most accurate set of TK armor??
  22. Thank you all for your advice!!! I’ll stick to buying my own kit. I’ve been looking into ATA and WTF kits
  23. Hey Guys!!! I’m Carter, I’m 15 and not quite able to join the 501st but own an Anovos ANH TK stunt costume and it’s my pride and joy :) I’m interested in a shadow trooper costume but want to tackle it myself. I’d like to vacuum form my current kit but I have some obstacles. Vacuuming ABS armor would cause it to crack correct? If so what other options do I have? Can I make a mold of my current set? A response would be appreciated. Thank you!!!
×
×
  • Create New...