Chapaaz

Ok really wasn't happy with the counter and found out that certain things weren't right with it. So I've sanded it down and primed it again ready for a new coat of black and brass dry brush [emoji1303] Sent from my iPhone using Tapatalk

Ok I'm done [emoji1303] (I hope ha ha) Finished the counter and fitted it. Filled the screw heads and weathered [emoji1303] Sent from my iPhone using Tapatalk

I cracked on with the counter this morning. Little bit of a pain to do but not to bad. Sent from my iPhone using Tapatalk

I got all this done today the only thing left to do is the counter which hopefully I'll get done this week. I'm really chuffed with how well this has turned out considering how nervous I was about the build. Sent from my iPhone using Tapatalk

Cheers mate [emoji1303] Sent from my iPhone using Tapatalk

Scope finished and weathered really happy with how it's turned out. Sent from my iPhone using Tapatalk

Today's plan [emoji1303] Sent from my iPhone using Tapatalk

Yea I cracked on today with it mate. Hopefully get the main blaster painted tomorrow and it fitted together, the biggest bit I have left to do is the counter really. Sent from my iPhone using Tapatalk

Got more done on my build today and some painting Hopefully I'll get the rest done tomorrow and that's it finished. Fingers crossed Sent from my iPhone using Tapatalk

Got some more done on my blaster today. Got the end cap glued ready to paint Got the mag release clip and new base on Got the scope primed and drilled ready for the lenses, screws and brass paint Selector switch and rear sight on So this is pretty much where I'm up to need to cut and fit the scope rail but not sure on measurements. Sent from my iPhone using Tapatalk

Cheers mate [emoji1303] Sent from my iPhone using Tapatalk

I used resin to glue it and I put 3 nails that I cut the head off and trimmed in the grip and drilled the barrel for extra stability. Sent from my iPhone using Tapatalk

Little bit more progress it seems to be taking shape now. I had a go at that front sight and used a hacksaw to hollow it out. Sanded down the block I cut out and used a little screw driver as the main sight. Tonight I glued the mag housing and grip on. Sent from my iPhone using Tapatalk

Final got my thighs finished. The right needs lifting a bit and garter needs tightened but other than that I think it fits great. Just need to finish my doopys build Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Little bit of progress today, got the working trigger done a few bolts drilled out and replaced and picked up my aluminium strip for the scope [emoji1303] Sent from my iPhone using Tapatalk

Ok thigh cover strips are done and dusted just put the ammo pack on. Sent from my iPhone using Tapatalk

That's a helluva patch job, nice going trooper [emoji1303] Sent from my iPhone using Tapatalk

Hello mate how much are your scopes? Sent from my iPhone using Tapatalk

Little bit done today but not much. Still pretty daunted by the fact of making this e11 as I keep thinking I'm a bit out of my depth with it. Sent from my iPhone using Tapatalk

Do I drill these holes out underneath the e11? Sent from my iPhone using Tapatalk

Now that my TK is nearly complete I thought I'd make a start and wash all my doopydoos kit. I'll dry it off and start by drilling all the holes and screws out ready for my actual screws to go in. Sent from my iPhone using Tapatalk

Aye always had massive legs, been weightlifting since I was 18 ha ha Sent from my iPhone using Tapatalk

Bigger than I thought mate ha ha. I've got the left thigh sorted now spoke to Ross on the ukg Sent from my iPhone using Tapatalk

Ok I've re adjusted the left thigh I need a 35mm cover strip for it to cover the widest part going down to a standard 20mm is this ok to do? Sent from my iPhone using Tapatalk