-
Posts
191 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Yiyo
-
-
That should be ok. The round container looks a little tall but should be good. The buttons from the screen grab looks square not round and the three arch's look pointed where they should look half round instead. These are only my observations. Looking good though and love the progress!
Thanks Magni! I have changes the top buttons and boxes, will get a pic up tomorrow - been busy finishing the armor for Expert/Centurion level
Sent from my iPhone using Tapatalk
- 1
-
Sent from my iPhone using Tapatalk
-
This is the layout I have planned.
Sent from my iPhone using Tapatalk
-
Hi Magni! Yes, clear part upwards and it sizes up more or less like the BF pic posted by Allan1313 above. I am going for the smaller pack compared to others. Will get some sizing pics up this weekend so you folk can give me some input, but I feel it's going to look goodAre you using the clear part outward and lid against pack? How does that box size up with others on pack?
Sent from my iPhone using Tapatalk
- 1
-
Do you think I can use this as my vent box? It will stick well and doesn't weigh at all.
Would you prefer I cut the small surrounding edge off or can Inuse as it is?
Sent from my iPhone using Tapatalk
-
Does this look better?
Obviously needs trimming - I found this 2mm foamex in the house Pretty sure that with priming and painting it will withstand.
Sent from my iPhone using Tapatalk
-
In my opinion the scale is a little off. The top part of the box I think the borders need to be a little slimmer and the bottom should have a little more "space" inside the borders.
Here is a screenshot for reference:
All that being said, its probably still passable. Again these are just my opinions and all that really matters is your GML.
Sent from my Nexus 6P using Tapatalk
Will cut down and repost! Thanks!
Sent from my iPhone using Tapatalk
-
How's this looking?
Sent from my iPhone using Tapatalk
-
Could you not buy a plastic storage box and cut?
I have bought an oil pan, but smaller than these ones, it's 13x30x52 (cm).
Sent from my iPhone using Tapatalk
-
Have also been preparing the electrical boxes for filling and sanding
Sent from my iPhone using Tapatalk
-
Ok, radio pieces are cut out and ready for glueing
Sent from my iPhone using Tapatalk
-
I just used pcs. Cut from the same pipe. I cut three 1/2" rings for the raised ribs and a pc. For the main control pad. The curve matches right up. Took about 15 mins to cut all the pcs. down.
Magni, I'm useless at Tapatalk - have you got a build thread?
Pretty sure you have as I believe we have talked recently, but I can't find it to see a pic of your antena
Sent from my iPhone using Tapatalk
-
That's a nice looking pack that Bowman built! I noticed that he did not use a ribbed shoulder bridge on the vertical black tube, though. While not necessarily a requirement, I feel it is an integral part of the pack. I didn't have one to spare on my build, so I ended up making one out of spare ABS I had, and it worked out fine. Best of luck on your build, Tom, and if I can be of any help just let me know, future HWT!
Thanks for your reply!
Are you referring to this piece below? I just realised this was his initial pack and added later, not sure how I can recreate this as cash is running low - any help on understanding how you did it?
Sent from my iPhone using Tapatalk
-
Oil pan received today from Germany:
Dimensions are approx: depth = 130mm, width = 300mm & height = 510mm.
Sent from my iPhone using Tapatalk
-
Hi extended family!
This will be my HWT backpack build thread, so I hope I can get as much help from you as possible!
My backpack will be on the smaller side compared to others in an attempt to recreat the BF series where they actually carry a thermal detonator underneath the pack.
I would really appreciate as much constructive criticism as possible.
I am basing my build on Bowman's backpack (colleague from the Spanish Garrison) and input from Tony's build thread (ukswrath). Bowman's pack is shown below
Sent from my iPhone using Tapatalk
-
Hey,
I recently purchased a set of Battle spec armour from Sheperton Studios. Had no intention of wearing it, just to look cool in my games room, Then i found out about this place... it all changed!
just the one question really... (for now)
The battle spec is made from Satin finish ABS where as the original (and more expensive) is made from Acrylic Capped ABS, Can the Battlespec be used for EIB or an i out of the game before i start?
I can post pics later to show what i mean
Cheers
Paul
Hi Paul, SDS is very popular in yhe Spanish Garrison and we have at least 10 Centurions! This is a fantastic armor that some people talk down about
If I can help in any way, let me know! I will be requesting EIB this week
Sent from my iPhone using Tapatalk
-
Hi, I have seen some people submit pics of the modified button plates, but from CRL, I understand this is a level 3 requirement. Am I correct?
Many thanks
Sent from my iPhone using Tapatalk
-
The problem with the SDS armor is that EIB is as high of a level as you can achieve due to the methods of construction. The adhesive is a plastic Insta weld so taking it apart to correct it will only do damage
There are plenty of Centurions in the Spanish Garrison with an SDS and it requires no more carefulness than other armors - let's keep the facts as facts
Sent from my iPhone using Tapatalk
-
Excellent Kmann!
Sent from my iPhone using Tapatalk
-
Excellent Kmann!
Sent from my iPhone using Tapatalk
- 1
-
I need to do this from a compiter then Tony, can't see your signature on TapatalkFollow this link then find Cooling fan kits under the sales section.
Thanks buddy!
EDIT: found your website from your profile, please delete!
Sent from my iPhone using Tapatalk
-
Hello from sunny Spain!
What a great time to start trooping under 34C
Nothing much for me to say, this is a dream come true and I have fallen for my colleagues from the Spanish Garrison! What a wonderful bunch of people
Got 2 missions under my belt in 2 weeks, have another 2 over the next 72h, absolutely loving it!
It's great to here with my new extended family!
Tom [Yiyo]
Sent from my iPhone using Tapatalk
- 3
-
I ordered the exact same material Echo uses but I found it in black. Enough to make 20 brackets. Echo's were laser cut, mine will be done by hand, I'll let everyone on my sales thread know how it goes.
Let me know! Need to find that thread....
Sent from my iPhone using Tapatalk
-
I'm going for the second one made by a colleague here at the Spanish Garrison!
Sent from my iPhone using Tapatalk
- 1
HWT Pack Build - SheaJeff
in Build Threads Requireing Maintenance
Posted
Execellent!
Sent from my iPhone using Tapatalk