-
Posts
199 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by The Anonymous Egyptian
-
-
Thanks, yes it does make sense, bout to start the ears and get my copy of The Empire Strikes Back up!!Looking good. At this point would also be a good to have an idea of where you will want the ears to go. I often pick a movie helmet with similar assembly positioning and use that as a reference. How far back, how far up, how much rotation. Main reasons for doing it now is to be sure the holes you drill will be hidden by the ear, and if using rivets first, to be sure they don't overlap where the ear screws will likely go. You will want to be sure the ear is positioned low enough to curve all the way around to the bottom of the tube to cover up any discontinuity where the front and back halves of the helmet meet there. Hope that made sense.
Sent from my 5022X using Tapatalk
-
So, Brow is trimmed and Helmet is clamped, just need to drill it together now.
Sent from my 5022X using Tapatalk
-
PHEW. Hahaha thanks bpoodoo. Great name by the wayYep that'll work! I did have one helmet that started to split upwards from that point without it, so it's good you added it.
Sent from my 5022X using Tapatalk
-
Sooo after a while from the bucket (due to exams and revision) I've managed to trim the bucket just a little more. Especially where was suggested previously.
Before:
After:
Hopefully I've done alright. Let me know what you think!!
Sent from my 5022X using Tapatalk
-
I was literally about to order a Scott M helmet decal set, but I have recently just discovered ESB decals are different to ANH, as I thought ESB were simply ANH markings, but as decals rather than hand painted. So does Scott M do ESB decals? If not where can I get some ESB decals for a similar price?
Thanks!!
Sent from my 5022X using Tapatalk
-
On 5/14/2016 at 6:18 PM, bpoodoo said:
KO22 makes a good suggestion. The point he's referring to is here.
----------
There's a lot of stress at this location after the ears and u-trim are installed. Rounding off or squaring off where those two cut lines meet will reduce the chance of the plastic splitting there. Just cut out a small diameter semicircle or notch (2 mm or so) at the point where the cut lines meet. Don't make it too big, since It's also where the bottom of the U-trim will be, and you don't want it to droop.
i.e. like this (I feel like I'm using a TRS-80)
----------
|
\
\
\
\
or
----------
(
\
\
\
\
Oooooh!!! I see now! Thanks KO22 and bpoodoo
Sent from my 5022X using Tapatalk
-
Sorry, where do you mean? (A photo could be helpful) thanks!I have one suggestion on the top piece of the bucket. Under the traps instead of having it come to a point, try to round it a little just so that the plastic won't tear. Someone recommended that to me when I was making my bucket and I have not had an issue with it. Just be sure you do not go too high as you want the ear piece to cover those parts up. A rounded file should take care of it with just a few passes.
Sent from my 5022X using Tapatalk
-
Amazing! Wish I coulda been there!!
Sent from my 5022X using Tapatalk
- 1
-
Well my nickname isn't quite as emotional or cool as some of you guys, but it kind of just originates from the fact I'm Egyptian. My real name is Omar, so no relation there!! I used it as my steam username and all my friends loved it, so from there its just kinda stuck. Its mainly a joke I guess as practically everyone in my High School is aware I'm Egyptian, so using the word 'Anonymous' is just a bit of ironic humour. I guess you could say I'm honouring my Egyptian heritage with it? I use it on everything but my YouTube now, so its just become my Pseudonym I suppose. Anyway that's my story!!
Sent from my 5022X using Tapatalk
- 4
-
Today I have dremelled the teeth out and have been sanding and filing again. I am aware that I have accidentally cut an extra bit on the right hand side of the helmet, but I do have a plan on how to fix it. Anyway:
Before;
After;
As you can see, not too much but just a little fine tuning.
Sent from my 5022X using Tapatalk
-
Sooo yesterday I got my edges and eyes trimmed at my school's tech department and proceeded to sand and file at home.
Pre-Sanding/filing:
Post-Sanding/filing:
I'm personally very happy with end result, what do you guys think so far??
Sent from my 5022X using Tapatalk
-
Thanks will work on ear tomorrowThe ear trim trace as you have it might be too aggressive and leave a gap, particularly just before the end of the the round part to the bottom of the ear. You might want to make your first trace more conservative there to create a thicker ear at first. You can always trim and sand thinner but can't add back on. The best ear trim will depend on how you've assembled the helmet and where exactly you want to position the ear on the helmet.
http://www.whitearmor.net/forum/topic/29238-my-helmet-ear-tutorial/
http://www.whitearmor.net/forum/topic/27375-howto-draw-an-approximate-ear-trim-line-with-no-gaps/
Sent from my 5022X using Tapatalk
-
Marked up and ready to trim!!
Before I do any problems with the bucket so far??
Sorry for image spam!!
Sent from my 5022X using Tapatalk
-
Scott M does ESB then? Also is the hemet structure any different?Nope, ESB has a special decal, much sharper, whilst ANH has hand painted details.
So, if you're going for ANH, you have to get hand painted style decals, or paint them yourselves.
If you going for ESB, you have to get ESB decals.
There's minor differences, but noticeable up close.
I personally like the look of ANH trooper.
Sent from my 5022X using Tapatalk
-
One more thing, this works for ESB right? Last I checked ESB were ANH Stunt with a black frown?
Sent from my 5022X using Tapatalk
-
Is it like centurion level approved? As he States it may not be to the '1976 standards'.Pandatrooper had a great one that takes you step by step through the whole build. I used it for my build.
Sent from my 5022X using Tapatalk
-
Actually, anyone know any good tutorials for helmet assembly? I know the basics on how to trim, connect the ears, ...etc., but are there any in depth ones out there?
Sent from my 5022X using Tapatalk
-
My kit unboxed!!
-
Happy May the 4th everyone! I was especially lucky when today I received a notification that my ATA helmet kit is now at the local post office! I will collect tomorrow and keep you guys updated on the build!
Sent from my 5022X using Tapatalk
- 3
-
Hey FISD!!! Happy may the 4th!!!!!
I've created a couple of videos using some Star Wars footage, hope you guys like it and let me know what you think down in the comments or on here!! Thanks!
Original Trilogy: Step Out
The Force Awakens: Run Boy Run
Friends the Force Awakens (parody)
-
I feel ya, lots of revision at the minute so I only get weekendsAccepted
Not playing as much now, mostly late at night, after work. I got to level 35 and since then, levelling-up has been strenuous, with 59k points needed each time!
Only manage to play about an hour or less at a time before my eyes get strained
Sent from my 5022X using Tapatalk
-
OK so I know he's not 'white armour' but he is 501st...
https://www.mealtrain.com/trains/89nl85
that's no moon, Kim Kardashian is bending over again...
Hey AWOL, how can I help? I can do some cooking but I don't know if I can do May or June due to exams and intense studying.
OK so I know he's not 'white armour' but he is 501st...
https://www.mealtrain.com/trains/89nl85
that's no moon, Kim Kardashian is bending over again...
Sent from my 5022X using Tapatalk
-
Request SentI didn't like the Beta version for some reason but bought the game anyway - Well, it IS Star Wars
Yeh, really like it now. Play mainly Turning Point, Fighter Squadron or Walker Assault. PSN name same as here, feel free to add me
Sent from my 5022X using Tapatalk
-
PM sent
Sent from my 5022X using Tapatalk
HELMET KIT HAS ARRIVED!
in Hard Armor (General Discussion)
Posted
Ear Assembly commencing!!
Left side;
Right side;
Sent from my 5022X using Tapatalk