-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by StevenBills
-
-
22 hours ago, TheRascalKing said:
Boom, take it over here if you want.
Hmm... It says I don't have permission to see it...?
-
Wow! What an episode! What was is like running around with all the pyrotechnics going off everywhere? Was it pretty chaotic? Those of you who were in the show, have you been able to spot yourself yet? If so, post a screenshot!
SB
- 1
-
Well I'm sure there will be more questions after Friday. Who was it that brought the T-21 to the E-11 fight?
SB
- 1
-
Was the troop transport (that we've seen before in Rebels) fully practical, or was it utilized through CGI?
-
So... I saw a few of you on TV tonight... Anyone wanna chime in on it?
SB
-
On 9/4/2019 at 8:22 PM, mikidymac said:
Don’t get discouraged. I’m 6’3 200lbs and using the standard Anovos kit. Built for Centurion level and finally getting around to applying for EIB.
I didn’t have to shim anything. The biggest thing is spacing things like thighs and shins and arms to make the gaps look proportional.I'm 6'1" and "they" had issues with the gap between my back plate and the kidney piece (and it's not even that big of a gap). How'd you get around that?
-
Any updates?
-
On 3/7/2019 at 8:13 AM, Ericnathan811 said:
https://www.youtube.com/watch?v=E-AmHZ17gWM
About 15-20 seconds in there's a esb TK with his shoulder on his forearm Look on the right side when they come down the steps.
Great, now I'll never be able to un-see it!
SB
-
Not really into Hamlet (or Shakespeare in general), but this was well done. Watched it for the TK and the cinematography.
SB
-
Looking forward to this!
-
All the pics are gone.
SB
-
Lookie at the OT AT-ATs and a variant of the AT-ST...
Looks awesome!
SB
-
Thanks everyone! I'll keep you posted on how it goes.
SB
-
Submitted my 501st application photos today!
Thanks for all your help and let me know if anything looks off!
SB
-
Dang. You're making all of use mere mortal dads look bad!
Very cool!
SB
- 2
-
Actually, here is a pic of the cutout on the backs of my thighs. I'd like to trim some more for better movement, and my question is this: How much can I get away with trimming?
-
Alrighty, I've uploaded this pic elsewhere, so size should no longer be an issue. I trimmed the two corners around the neck as well as the return edges around the tops of the thighs, although I don't have a pic of that.
I'm taking my submission photos on Saturday, so wish me luck!
SB
-
Thanks for the replies, all. @gmrhodes13, I guess I wasn't super clear with my image. I was wondering which leg looked better in terms of the gap, the left or the right. After fiddling around with it a bit, I think I'm going to go with the smaller gap. This also helps out with walking, as it lifts up the thighs so that I can bend my knee a bit more. I have a slight cutout on the backs of the thighs, but I'm wondering if I can do more for ease of movement. I don't have a picture handy, but I'll get one in the next few days.
@justjoseph63, thanks for the heads up on the buttons. Luckily it's all E-6000'd on. I'll pop it off and sand it flush. Also a good point about the upper thigh return edges. Those aren't required? If not, I'll definitely be taking those off to ease movement and fit (thick thighs here lol).
And @Allan1313, I have seen people do the hot water bath on the backplate to help eek out an extra cm or two. I'll have to give that a shot.
Also another general question: would it be okay to trim the neck return edge a bit in towards the corners, so that it blends evenly into the shoulder straps? I get a bit of neck bite from these two corners. See the pic below for illustration.
Thank you to everyone who has replied thus far. It's really helpful! I'll update later with some more pics as we go.
SB
Also, how do I attach more than just a teeny-tiny image?! This is driving me bonkers. I had to compress this one to smaller than 30kb in order to attach it to this post. What am I not seeing here?
-
-
Thanks for the replies, all. I am going with a garter belt system and I'll see how that helps. I'm sure it'll help a bit, but I just may need to add a spacer underneath the belt as well. We'll see. I'll post pics as we go.
SB
-
Not sure why it's not letting me attach more than one image, but here are two more.
-
Hey all,
I finished my Anovos kit some time ago (almost a year?!), and I absolutely love it. I've worn it to a few parties, and I'm working towards 501st approval, but I have a few issues with how it fits on me. I'm 6' 1", so a little on the tall side, and whenever I stand up straight, I get a gap between the chest and the ab pieces. While this doesn't bother 99.999% of Joe Public, it bugs the crap outta me. Does anybody know how I can fix this? Below is a pic to show what I'm talking about.
So I think I know why this might be happening, (not including the fact I'm a bit taller). I used the Anovos strapping system, and so the thigh armor snaps to the cod piece, which is attached to the ab plate. So after a while of walking around, the weight of the thigh pieces has a tendency to pull the ab plate down slightly. I'm thinking about going to a garter system for the thighs, but other than doing that, does anybody have any thoughts on this?
Thanks!
SB
-
Hey all,
I'm in the middle of a Hasbro DoopyDoos mod, and I've been following Brent's thread as reference here: http://www.whitearmor.net/forum/topic/18583-yahm-yet-another-hasbro-mod/page-2
I am a bit stuck now, though. I have a pipe all drilled out, but I need to know how far the barrel protrudes out of the gun. Does that make sense? Post #31 in Brent's thread is where I'm at currently (for reference): http://www.whitearmor.net/forum/topic/18583-yahm-yet-another-hasbro-mod/?p=228238
Anybody what to measure their E-11 for me?
Thanks!
SB
-
Some of our own in the new Mandalorian TV show??!!!
in Off Topic
Posted
Ah. I've submitted but not approved. Gotta fix a few things first, I guess...