PhoenixTrooper

Yeah, but it doesn't show up well in photos. I hit it with some brown spray paint mist to look like dirt, but you have to redo it every couple washes. Actually hit the neckseal with the sander on the dremel, bit don't want to put holes in the suit where skin would show through. I like it being washable, so not adding zombie spots. Sent from my 831C using Tapatalk

This is a pic from Con, which also shows the new weathering with more olive color they asked for. Once I get over con crud I'll repair a couple things a drunk guy broke, then throw it on and take my Centurion pics.

Yep, I was the one without the mouse ears. Sent from my 831C using Tapatalk

Finally managed to get the lights hooked up in the helmet. Here's a quick video. Sorry the image is kinda bad, but my phone is sorta sucky at that. There's a flashing alarm light behind the broken lens, and a sparking electricity light in the side tube. http://vid381.photobucket.com/albums/oo252/Metikla/TK%20Stuff/Death%20Trooper%20WIP/lights.mp4

Thanks! Yep, Centurion's the plan. I'll get to dirtying those rivets. As to the olive green - I actually was purposefully avoiding that color because it doesn't make a lot of sense. The armor itself doesn't get gangrene and rot. I wanted the weathering and damage to make sense so I was using dirt browns and soot blacks with some red blood spatters. Is there a reason behind the green? Seems a little 'fleshy'.

Interior connections Exterior cod connection DLT-19

Name = Chris Sanders TK ID = 80806 FISD Forum Name = PhoenixTrooper Garrison = Georgia Garrison WIP: http://www.whitearmor.net/forum/topic/36006-death-trooper-wip-lots-of-pictures/ Armor Maker = Anovos Helmet Maker = Anovos Blaster = Hyperfirm DLT-19 Height = 5'10" Weight = 250 lbs Boots = TK Boots Canvas Belt = TKittell Hand Plates/Gloves = justjoseph63 Neck Seal = Darman “Holster” = me Full Body Pictures: Front Back Left Right Right Detail Left Detail Armor Details Abdomen Details Action Shot Helmet Details Front Side Back Hovi Tip Detail Lens Color Accessory Details Neck Seal Thermal Detonator Back "Holster" Attachment Extra Rubber Guards S Trim

And finally approved!

Shiny new pics acquired!

And.... it's done! Just submitted the below pics to my GML. Once I hear back from him we'll submit for EIB and eventually Centurion! Getting nicer photos made with a real camera tomorrow. In the words of some Mutant Enemy - "Grr. Argh." (Cat doesn't even care.)

So, I haven't updated in a bit. This has been for a couple reasons. One, I was looking for some good 70's tech to put in the belt boxes and such, and two, I took a break to completely redo my dining room. One hardwood floor later, I'm finally back at things. Which is good, because I really only have the legs to do now. The fun part has been putting the computer bits in my armor. I have holes one of my belt boxes, one of my drop boxes, and in one of my knee ammo packs. Belt box: Drop box: Knee ammo pack: After the tech was installed and decorated, I also got one calf completed. Decided the knee was a bit stabby looking, so... When I got done, I showed a few folks and I won a Major Award! (It said Fra-gee-le, so it's apparently Italian.) I got initial work started on the other 3 leg parts, but ran out of time to work on it for now. Hope to have it all done within the next week or so.

So, I've finished the upper body except the belt for the most part now, and haven't updated for a bit. Figured I should do that. I laid out the back to look at it all together: and decided I could use a new blaster shot in the kidney to make it well rounded. I also had to add shims to the armor since I'm not 'tiny British actor' sized. Since the Anovos armor is so thin, no matter how I did it there was going to be an uneven surface (my shim material is much thicker) so rather than making a butt join between the shim and the kidney and filling it in like I did on my ATA TK, I cut the shim long and glued it inside the Anovos kidney (also conveniently fixing where they had made the little cut out for me that would be in the wrong place with shims). Then I sludged it and sanded it down, then wetsanded so the weathering would look about right when I got to that part. Some creative weathering and cracks, and you can barely see it's separate parts now. Also cut the little cutouts back into the correct place. This is much more solid than my ANH TK, and I am considering updating it now. And while the belt isn't done yet, the thermal det is: I even carried some of the damage over to the metal clips for some reason. I guess I'm just an overachiever.

I can try to take some better pics later, but these are some quick ones I happen to have atm. I've also not actually cleaned it up to look pretty inside yet, beyond the initial painting it black. Have to cover some of the foam and hair bits and things still and add some small head pads, but it's wearable as is: The pieces are glued down with foam separators to give some depth so it looks like your skin in the armor instead of something glued over the hole. Actually do that throughout the armor. You can see I cut out the eye hole since it's behind the lens where your eye can't be seen. You can also see in the corner where I've started the back plate. It's not done yet, but it's coming along:

Put the ab plate together today. Started out cutting out the buttons and painting and attaching them like I was building a normal TK. Left the little ridge showing around the edge that they asked for on my Centurion ANH Stunt as well, since I plan eventually having this as Centurion as well. Once it was all nice and pretty, I destroyed it. If you look closely where the button plate is broken, I added some burned up wires sticking out: And finally, to get a rough idea of how they look together:

For the fun of it, I threw on the upper parts to see how it looked together and check weathering consistency: Then I started working on the boots. My ANH Stunt TK bots are over a year old and have been to the Ren Fest and other troops, so they aren't super clean anymore. I bought a new set of "less than perfect" boots from TK Boots for this, and they were so nice, I gave them to my shiny TK, and I took the older set for this. I dirtied them up a tiny bit more, since some of the dirt was real, and then summoned up the courage to damage them: I burned the edges of the leather as best I could, but it was so fire retardant I ended up using charcoal powder and dirtying it that way. Also added some 'blood' coming from the cracks. Then I put in my zombie foot (which had to be repainted like ALL the other body parts to match the white skin on the mask).

After a bit off while I waited for a very slow shipper to send a part I wanted, I'm back at it. Got the chest done today. Glue's drying, so ignore the magnets. You can also see the underarm strap is there, but 'blasted' apart. Had to put some extra straps inside to hold it together correctly since that strap won't be functional on the final armor.

Not made a lot of progress beyond getting both arms done now. Got the body cut out, but going to have to get shim material before I can do the body or legs, so at a minor stand still. Got most everything cut out anyway.

Today I finally started working on the gloves. The hand pieces I had weren't the same color as the mask, so the first step was choosing my pieces and repainting them: At that point I needed to put the hole in the glove where the flesh would show through. I used a variety of tools for an uneven look: This gave me the final result of the following: After that I learned that cutting latex handguards with a dremel can actually destroy the dremel if you're not careful. Fortunately I got it all done and painted up and attached: After a bit of work I have completed both hands. I may go back and do more later, but I'm calling it done for now anyway:

Most of the color is a wash of black or brown mixed with Windex sprayed on with a little spray bottle and wiped off with a paper towel. The blood spatter is flicked on with a brush. Charcoal powder is brushed on with a makeup sponge and rubbed with my fingers. Cracks are just hand painted with a tiny brush. Sent from my 831C using Tapatalk

Right arm is about done. Here's the bicep: And the shoulder (I actually put it on and bumped into the walls a few times to make sure the scuffs would be right, and hit it with some sandpaper, which made for dark weathering spots): And finally, the finished pieces so far:

Broke this into a second part because the reply window was having issues: After the cracks are painted it needed another wash with black/windex: And another round of nutmeg/windex: Finally, I went in with charcoal powder and a matte sealer to add some scorching around the blaster hole: I need to get some scrap black underarmor/lycra cloth to trim the edges of the blaster hole before I add more zombie flesh, but other than that the arm is basically done.

I'm going to break down the making of the right forearm in excruciating detail for the folks that wanted to know the techniques used. After this part I'll just post progress generally. First up, this is my unaltered Anovos right forearm, next to my ATA Centurion right forearm. The Anovos is large and weird looking. So the first thing I do is cut some rough end cracks into the armor. Like the delta of a river. Then I cut in a nice blaster hole, keeping in mind the direction of the shot. This one just winged me while I was reaching for them. Then to cut in all the little cracks I then did a first wash with a mix of black paint and windex: I then did a wash of nutmeg/windex: And then went in with black paint and picked out all the cracks:

Well, the cutting was almost exclusively dremel, other than the lens which was xacto knife. I weathered it with a leftover mix from my clone of windex and black, then did the same sort of mix with windex and nutmeg to make it more dirty and less 'charry. I added extra char around the face, then hit it with charcoal powder to char it up in that area even more. Sealed it with matte sealer. There's also specks of 'blood' around the mouth where I used some old Warhammer paints and basically flung it on a small brush to get the spatter look. I also plastidipped the inside of the helmet, which makes it darker and makes the flimsy Anovos helmet more solid. To start the whole project I printed out 3 identical lineart stormtroopers and marked out where the damage on them was for my two friends that have Death Troopers. I then decided to make sure my damage would be in different places so we'd look good together.

I've wanted one of these since I joined the Legion since the person that got me started has one themselves. When Anovos had their armor deal I decided the time was right. Thus far I've mostly completed the helmet (short of electronics) and am ready to start on the rest. Hoping to be ready for reveal by DragonCon this year! And also eventually a second Centurion. This is what I have so far:

Chris Sanders 80806 Letter Thanks!