RogueTrooper[TK] Posted January 13, 2010 Report Share Posted January 13, 2010 Don't forget about the ears ridges and screws .... Thanks for the info, much appreciated, no worries about the blue tubes, they're not real decals, I've just blue tacked them on to see how they look. On the decal note , i had a sheet delivered this morning , they look cool. Almost got everything to complete the build now. I've seen some dark green bubble lenses on ebay, going for around £13 might grab a pair rather than messing around with motorcycle visors etc. Cheers !! Quote Link to comment Share on other sites More sharing options...
KM90 Posted February 20, 2010 Author Report Share Posted February 20, 2010 Hi guys, Just posting a picture of the next bucket development. I've managed to give the lid a couple of coats of plastikote primer and have started to paint the frown and ears. Since last post I now have a chest and back plate with shoulder straps and a pair of hand plates. Cheers all. Quote Link to comment Share on other sites More sharing options...
RogueTrooper[TK] Posted February 20, 2010 Report Share Posted February 20, 2010 I am a little confused. You have primed the helmet, but havn't done the finish painting, right? If so, you should not have painted any detail work (the frown, ear trim, etc,), until after the final coat of white is sprayed and dried. Maybe, I read it wrong and correct me if so. Quote Link to comment Share on other sites More sharing options...
KM90 Posted February 20, 2010 Author Report Share Posted February 20, 2010 Yep you heard right, i'm goin to mask off ears,frown etc and then apply the gloss. I'm 100% certain that the humbrol paint will adhere to the primer coat better than painting over the the final coat. I suppose I could have masked then glossed and then applied the grey, either way I intended to pain the grey onto the primer. Painting matters a side,how do you think it's lookin Quote Link to comment Share on other sites More sharing options...
KM90 Posted February 21, 2010 Author Report Share Posted February 21, 2010 Yep you heard right, i'm goin to mask off ears,frown etc and then apply the gloss. I'm 100% certain that the humbrol paint will adhere to the primer coat better than painting over the the final coat. I suppose I could have masked then glossed and then applied the grey, either way I intended to pain the grey onto the primer. Painting matters a side,how do you think it's lookin Regarding painting the grey sections first, What I didn't also mention, is that figured if I were to paint the frown and ears first and made a mess. It would be more easy to correct the mistake whilst on the primer coat stage than trying to correct a botched paint job over the final gloss coat. Either way we'll see, I'll post another picture when the gloss coat is done. Cheers. Quote Link to comment Share on other sites More sharing options...
KM90 Posted March 15, 2010 Author Report Share Posted March 15, 2010 Here is the latest picture of my lid, with a gloss coat,might be applying decals soon. Quote Link to comment Share on other sites More sharing options...
KM90 Posted March 20, 2010 Author Report Share Posted March 20, 2010 Hi there, I've now applied the decals and brow.I've got work on the inside now. Cheers all. Quote Link to comment Share on other sites More sharing options...
SirDenzington89 Posted March 20, 2010 Report Share Posted March 20, 2010 nice lid man! Quote Link to comment Share on other sites More sharing options...
KM90 Posted March 21, 2010 Author Report Share Posted March 21, 2010 nice lid man! Thanks JD-89. For my first effort, I'm quite pleased with it but I would like to go for a Stunt at some point, I'm going to try and get some armour together now. I've just started to glue my forearm armour together. It's quite wide for my arms but I've decided to place some inserts inside for a tighter fit. I figured, if I cut it down to fit my arms, it would look way too skinny. Cheers all . Quote Link to comment Share on other sites More sharing options...
SirDenzington89 Posted March 21, 2010 Report Share Posted March 21, 2010 Thats my problem as well. Im a skinny dude so if I trimmed all my armor to fit it would look quite strange I think. So its a little loose, but I put some weatherstripping in the forarms and biceps for a tighter fit Quote Link to comment Share on other sites More sharing options...
KM90 Posted April 5, 2010 Author Report Share Posted April 5, 2010 Hi all, I've posted a picture of my armour so far, I'm currently waiting for a sniper plate to arrive. Quote Link to comment Share on other sites More sharing options...
KM90 Posted May 22, 2010 Author Report Share Posted May 22, 2010 Hi all I haven't posted for a while, just thought I'd post a picture of my latest project, I've just completed an FX bucket, as you can see from the photo, the lid came with flat lenses( Which need to be darker )so I've gone for the Stunt type frown. I'm currently modifying my previous lid. Cheers all !! Quote Link to comment Share on other sites More sharing options...
KM90 Posted May 28, 2010 Author Report Share Posted May 28, 2010 Just posting a shot of my new FX bucket in relation to some armour sections. My next armour section winging it's way is an ab plate. Quote Link to comment Share on other sites More sharing options...
KM90 Posted July 3, 2010 Author Report Share Posted July 3, 2010 HI there, I've now snapped/strapped the chest and back plate, I've attached the shoulder bells. I should have a set of biceps armour soon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.