Hasbro mod E-11 Blaster, ESB

[IRoS[TK]]

Hey all!~ 

 

Might be a silly question but I want to be sure, I'm trying to get EIB Status with a Stormtrooper Commander, The CRL approves the Hasbro Blaster as long as it has the correct number of T tracks, the thing is that the hasbro blaster has part of the ammo counter built in, do I have to remove this? or is it ok to leave it?

 

*I used DoopyDoo's mod kit*

 

For level two certification (if applicable):

• Folding stock is placed in the closed position.
• No ammo counter shall be present.
• D-ring mounted on the rear.
• Sterling based blasters have the correct M-38 or M-19 style scope.
  • The M-19 scope is preferred.
• No power cylinders on the magazine housing.
• Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
• If using the Hasbro E11 toy blaster, it is modified to have the correct number of T-tracks (6 total), with a lower row of open vent holes on the magazine housing side.
  • This is accomplished by covering the pre-existing rows of holes with T-tracks, then grinding off the lower integrated T-track on the magazine housing side, and drilling a new row of holes in its place

 

 Any info would be greatly appreciated!! thanks